Jiangsu milky way steel poles co.,ltd
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 1000POLES/MOUTH |
| Delivery Time | ALWAYS 20DAYS |
| Packaging Details | The normal package is container(Size: L*W*H). Our poles as normal cover by Mat or straw bale at the top and bottom and wood between the poles to avoide the damage on the galvanization of the pole , anyway also can following by client required , The lo |
| MATERIAL | S355JR |
| APPLICATION | ELECTRICITY DISTRIBUTION |
| THICKNESS | 2.5-10MM |
| SHAPE | POLYGON |
| GALVANIZATION | ASTM A123,average coationg not less than 85um |
| WELDING | AWS D1.1,penetration 100% |
| LIFETIME | 50 YEARS |
| WIND SPEED | 160KM/H |
| ULTIMATE TENSILE STRENGTH | 490-620MPA |
| Brand Name | milky way |
| Model Number | 69KV |
| Certification | ISO9001:2015 |
| Place of Origin | JIANGSU,CHINA |
View Detail Information
Explore similar products
60ft 65ft Bitumen Burial Type Galvanised Steel Tubular Pole For Transmission
30FT 35FT Steel Utility Tubular Pole With 3mm For Philippines Electrical Line
45m Powder Coating Approved High Mast Light Pole 400w - 5000w Power
Angle Steel Transmission Double Circuit Tubular Pole 220kv 132kv Power High
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 1000POLES/MOUTH |
| Delivery Time | ALWAYS 20DAYS | Packaging Details | The normal package is container(Size: L*W*H). Our poles as normal cover by Mat or straw bale at the top and bottom and wood between the poles to avoide the damage on the galvanization of the pole , anyway also can following by client required , The lo |
| MATERIAL | S355JR | APPLICATION | ELECTRICITY DISTRIBUTION |
| THICKNESS | 2.5-10MM | SHAPE | POLYGON |
| GALVANIZATION | ASTM A123,average coationg not less than 85um | WELDING | AWS D1.1,penetration 100% |
| LIFETIME | 50 YEARS | WIND SPEED | 160KM/H |
| ULTIMATE TENSILE STRENGTH | 490-620MPA | Brand Name | milky way |
| Model Number | 69KV | Certification | ISO9001:2015 |
| Place of Origin | JIANGSU,CHINA | ||
| High Light | 16m steel tubular pole ，1000 dan steel tubular pole ，electrical project steel tubular pole | ||
Specifications:
| Height | From 9 meter to 100 meter |
| Suit for | Electric Power Transmission and Distribution |
| Shape | Polygonal or Conical |
| Material | Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm² Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 |
| Power Capacity | 10kV to 220kV |
| Tolerance of the dimension | According to client’s requirement. |
| Surface treatment | Hot dip galvanized Following ASTM A 123, or any other standard by client required. |
| Joint of Poles | Slip joint, flanged connected |
| Standard | ISO 9001:2008 |
| Length of per section | Within 14 meter once forming |
| Welding Standard | AWS (American Welding Society ) D 1.1 |
| Thickness | 1 mm to 36mm |
| Production Process | Raw material test → Cutting →bending →Welding (longitudinal ) →Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating , painting →Recalibration →Packages |
| Packages | Packing with plastic paper or according to client’s request. |
Steel
Descripition of material:The material is in accordance with NF EN 10025
Standard and NF EN 10149 Standard,it has the following property.
-Yield Strength=355N/mm2
-Toughness remains the same under 20 degrees below zero.
-Galvanization is in accordance with NFA35503 Standard Class 1.
Galvanization
Standard:NFA91121
Average thickness of the galvanization:Not less than 86μm.
Installation
-Remove all the equipment on the pole during Assembly.
-Circle a sling around th epole shaft of each section.
-Fix the sling on top section to one pulley block.
-The sling on the bottom section is tightly fixed and fixed at the center of gravity.
-Make the steel pole vertical by tighten the sling of the top section.
-Fix the steel pole.
-Remove the sling.
Company Introduction:
Jiangsu Milky Way Steel Poles which established on 1991 is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port .
Our Company has 24 years experience on producing the steel poles including the transmission power pole,street light pole,high mast pole and so on.
We exported to oversea countries since 1991 and our products have been delivered to more than 70 countries and areas ,including America,Australia ,Russia ,Germany ,Span,Philippines ,Malaysia,Africa and so on.
We are the supplier of many big project in many countries,like the street light pole of Dubai Tower.the high mast pole for Sochi Winter Olympic Game and so on.
Company Details
Business Type:
Manufacturer,Exporter,Trading Company
Year Established:
1989
Employee Number:
100~500
Ecer Certification：
Verified Supplier
Estbilsed in 1989,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on We have p... Estbilsed in 1989,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on We have p...
Get in touch with us
Leave a Message, we will call you back quickly!