Yuhong Group Co.,Ltd
| Payment Terms | T/T, L/C |
| Supply Ability | 100 tons per month |
| Delivery Time | Depends on quantity |
| Packaging Details | PLYWOOD CASE,BUNDLE,WOVEN BAG |
| Standard | EN10216-2 TC2 |
| Grade | P235GH 1.0345 |
| O.D | 1/8"- 3" (3.2mm-76.2mm) |
| Type | Seamless, Cold drawn |
| Wall thinkness | MW. |
| Test | ET, UT, HT, PT |
| Brand Name | YUHONG |
| Model Number | EN10216-2 TC2 P235GH |
| Certification | ISO9001-2008 |
| Place of Origin | China |
View Detail Information
Explore similar products
Carbon steel seamless Boiler Tube, cold-drawn tube, ASTM A179
Alloy Steel Seamless Tube ASTM A209 T1, T1A, T1B, ASTM A210 A1, DIN 1629 St52.4,
ASME SA213 TP347H/ 1.4912 / X7CrNiNb18-10, Stainless Steel Seamless Boiler Tube
ASTM A213 / ASME SA213 UNS S34709 / TP347H Stainless Steel Seamless Tube Boiler
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | 100 tons per month |
| Delivery Time | Depends on quantity | Packaging Details | PLYWOOD CASE,BUNDLE,WOVEN BAG |
| Standard | EN10216-2 TC2 | Grade | P235GH 1.0345 |
| O.D | 1/8"- 3" (3.2mm-76.2mm) | Type | Seamless, Cold drawn |
| Wall thinkness | MW. | Test | ET, UT, HT, PT |
| Brand Name | YUHONG | Model Number | EN10216-2 TC2 P235GH |
| Certification | ISO9001-2008 | Place of Origin | China |
EN10216-2 TC2 P235GH 1.0345 Seamless Boiler Tube
EN 10216-2 is a European standard that specifies the technical delivery conditions for seamless steel tubes for pressure purposes. The standard includes several types of steel grades suitable for different applications under pressure.
TC2 in EN 10216-2 refers to the specific type or grade of steel tube being referred to. However, it's important to note that "TC2" isn't commonly referenced in this standard; typically, you might see references to types like D1, D2, etc., which refer to different steel grades.
P235GH is a specific steel grade mentioned in EN 10216-2. Here’s what the designation means:
- **P**: Indicates that the steel is intended for pressure equipment.
- **235**: Represents the minimum yield strength in MPa (megapascals).
- **G**: Specifies the heat treatment condition.
- **H**: Indicates that the steel has been normalized or thermomechanically rolled.
P235GH is a common grade used for boiler and superheater tubes due to its good mechanical properties and weldability. It is suitable for use in steam boilers and other pressure vessels where the working temperature does not exceed approximately 450°C.
So, if you're referring to a P235GH tube under EN 10216-2, you're talking about a seamless steel tube with a minimum yield strength of 235 MPa, suitable for high-pressure applications such as in boilers and similar equipment.
If you need more specific information regarding the standards or requirements for this particular grade of steel tube, please let me know!
| Chemical composition a, in % by mass | EN 10216-2 P235GH |
| C | 0.16 max |
| Si | 0.35 max |
| Mn | 1.20 max |
| P | 0.025 max |
| S | 0.010 max |
| Cr | 0.30 max |
| Mo | 0.08 max |
| Ni | 0.30 max |
| Al tot b | 0.02 min |
| Cu c | 0.30 max |
| Nb d | 0.02 max |
| Ti d | 0.04 max |
| V d | 0.02 max |
| Cr+Cu+Mo+Ni | 0.70 max |
| el grade | Tensile properties at room temperature | Impact properties | |||||||
| Upper yield strength or proof strength ReH or Rp0.2 for wall thickness T min. | Tensile strength Rm | Elongation A min. % | Minimum average absorbed energy KV2 J at a temperature of ℃ | ||||||
| T ≤ 16 | 16 ＜ T ≤ 40 | 40 ＜ T ≤ 60 | I | t | l | t | |||
| MPa | MPa | MPa | MPa | 0 | -10 | 0 | |||
| P235GH | 235 | 225 | 215 | 360 – 500 | 25 | 23 | 40 c | 28 d | 27 c |
| DIN | EN | BS | NFA | ASTM | ASME |
|---|---|---|---|---|---|
| DIN 17175 Grade St 35.8 | EN P235GH Grade 10216-2 | NFA A 49-219 Grade TU 37 F | ASTM A192 – | ASME SA 192 – | UNI C14 |
Wall Thickness Tolerance of test requirements
| Outside Diameter D mm | Tolerances on D | Tolerances on T for a T/D ratio | |||
| ≤0.025 | ＞0.025 ≤0.050 | ＞0.050 ≤0.10 | ＞0.10 | ||
| D ≤ 219.1 | ±1 % or ±0.5 mm whichever is the greater | ±12.5 % or ±0.4 mm whichever is the greater | |||
| D ＞ 219.1 | ±20 % | ±15 % | ±12.5 % | ±10 % | |
Application
1. Industry Applications
2. Material Properties
3.Design Considerations
4. Certification and Compliance
5. Installation and Maintenance
6. Environmental Considerations
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Importer,Exporter,Trading Company,Seller,Other
Year Established:
2007
Total Annual:
50M-70M
Employee Number:
50~850
Ecer Certification：
Verified Supplier
YUHONG HOLDING GROUP is one of the largest Procurement, Engineering & Contracting Group companies in China. Our group branch company and factory have been already approved by : ABS, LR, DNV, GL, BV, CCS, KR, PED 97/23/EC, AD2000-WO, GOST9941-81, CCS, TS, CNNC, ISO9... YUHONG HOLDING GROUP is one of the largest Procurement, Engineering & Contracting Group companies in China. Our group branch company and factory have been already approved by : ABS, LR, DNV, GL, BV, CCS, KR, PED 97/23/EC, AD2000-WO, GOST9941-81, CCS, TS, CNNC, ISO9...
Get in touch with us
Leave a Message, we will call you back quickly!