1.4410 Duplex Stainless Steel Sheet and Coil with 3/4/5/6mm Thickness and 1500mm

1.4410 Duplex Stainless Steel Sheet and Coil is a cost-effective corrosion-resistant stainless steel grade designed for applications requiring high strength, durability, abrasion resistance, and low maintenance. With a thickness range of 3mm, 4mm, 5mm, and 6mm and a standard width of 1500mm, 1.4410 stainless steel provides an excellent alternative to carbon steel, galvanized steel, aluminized steel, and painted steel materials.

1.4410 is classified as a low-alloy duplex stainless steel and is covered by ASTM A240 UNS S41003 and European designation EN 1.4001. Compared with conventional ferritic stainless steels, 1.4410 offers improved mechanical strength, better weldability, and enhanced resistance to chloride stress corrosion cracking.

Due to its balanced combination of strength, corrosion resistance, abrasion resistance, and cost efficiency, 1.4410 duplex stainless steel sheet is widely used in marine environments, industrial equipment, transportation systems, construction structures, and chemical processing applications.

Many traditional materials such as carbon steel, galvanized steel, and painted steel suffer from corrosion, surface degradation, and high maintenance costs when exposed to moisture, chemicals, salt spray, or industrial environments.

• Rapid corrosion in marine and outdoor environments
• High maintenance and replacement costs
• Poor resistance to chloride-induced corrosion
• Reduced service life caused by abrasion and mechanical wear
• Limited performance of conventional carbon steel alternatives

1.4410 duplex stainless steel was developed to solve these problems by providing a stronger and more corrosion-resistant material while maintaining a competitive price. Its chromium-based corrosion protection creates a passive oxide layer on the surface, significantly improving resistance compared with mild steel. Atmospheric corrosion tests show that 1.4410 can provide hundreds of times longer service life than unpainted carbon steel in moderate marine environments.

1.4410 Duplex Stainless Steel Sheet and Coil provides an optimized solution for industries requiring:

• Long-term corrosion protection
• High mechanical strength
• Good weldability
• Low maintenance requirements
• Cost-effective stainless steel performance

Compared with austenitic stainless steel grades such as 304 and 316, 1.4410 offers excellent resistance to chloride stress corrosion cracking and higher strength. It is particularly suitable for applications where appearance is not the primary requirement but durability and performance are critical. The material forms a protective surface patina during exposure, which acts as an additional barrier against further corrosion.

1.4410 stainless steel is suitable for moderate marine environments due to its superior resistance to atmospheric corrosion and chloride stress corrosion cracking.

• Marine structures
• Coastal construction components
• Port equipment
• Offshore support structures

The combination of strength and corrosion resistance makes 1.4410 suitable for:

• Industrial machinery
• Chemical processing equipment
• Storage tanks
• Wear-resistant components
• Manufacturing equipment

Used where durability and low maintenance are required:

• Building structures
• Exterior panels
• Bridges and infrastructure components
• Elevator components

Applications include:

• Railway components
• Heavy-duty vehicles
• Transportation equipment
• Structural parts requiring high strength

With suitable surface finishes, 1.4410 can be used for:

• Kitchen equipment
• Processing machinery
• Utility equipment

1.4410 duplex stainless steel protects against corrosion through the formation of a passive chromium oxide layer on the surface.

The working mechanism includes:

1. Passive Film Formation
   Chromium in the steel reacts with oxygen to create a thin protective oxide layer. This layer prevents oxygen and moisture from penetrating into the metal structure.
2. Corrosion Resistance Protection
   When exposed to mild corrosive environments, the passive layer repairs itself automatically, reducing further corrosion.
3. Duplex Microstructure Performance
   The duplex structure combines properties of ferritic and stainless steel phases, providing:
   • Higher mechanical strength
   • Better resistance to stress corrosion cracking
   • Improved durability
4. Wear Resistance
   The higher strength level helps the material withstand mechanical wear and abrasive conditions better than ordinary carbon steel.

When selecting 1.4410 duplex stainless steel, consider the following factors:

Choose 1.4410 for:

• Outdoor applications
• Moderate marine environments
• Industrial environments with moisture exposure

For highly aggressive chemical environments, consult technical specialists for material compatibility.

• 3mm: Suitable for lightweight structures and panels
• 4mm: Common industrial applications
• 5mm: Higher strength structural applications
• 6mm: Heavy-duty equipment and wear-resistant components

• 2B: General industrial use
• No.4 / HL: Architectural applications
• BA / 8K: Decorative applications

Consider:

• Welding method
• Cutting process
• Forming requirements
• Mechanical strength requirements

1.4410 duplex stainless steel is covered by ASTM A240 UNS S41003 and is also known as EN 1.4001. It is a low-cost corrosion-resistant stainless steel grade designed for industrial applications.

Yes. 1.4410 provides significantly better corrosion resistance than mild steel and galvanized steel. It performs well in mild marine and industrial environments and has strong resistance to chloride stress corrosion cracking.

The commonly supplied thicknesses include 3mm, 4mm, 5mm, and 6mm with a standard width of 1500mm. Customized sizes may be available according to project requirements.

Yes. 1.4410 offers better weldability compared with stainless steel grades such as 409 and 410S, making it suitable for fabricated structures and industrial equipment.

1.4410 provides higher resistance to chloride stress corrosion cracking and higher strength, while 304 stainless steel generally offers better resistance to pitting corrosion and better appearance for decorative applications.