Shandong Jiuyuan Steel Structure Co., Ltd
| Model NO. | JB200 |
| Production Method | Extruding |
| Unit Length | 11.8m/5.8m |
| Connection | Steel Flanges |
| Working Pressure | 0.4MPa-2.0MPa |
| Transport Package | Standard Sea Worthy Packaging |
| Specification | DN560 |
| Trademark | Jiubei |
| Origin | China |
| HS Code | 3917210000 |
| Supply Ability | 3000m/Month |
| After-sales Service | Guide Site Installation |
| Material | HDPE |
| Kind | Thermoplastics Pipes |
| Water Absorption | ＜0.01% |
| Contraction Percentage | ＜0.4% |
| Tensile Strength | 30~40MPa |
| Samples | US$ 5/Meter 1 Meter(Min.Order) | Request Samp |
| Customization | Available | Customized Request |
| Payment Terms | LC, T/T |
| Place of Origin | China |
| Certification | ISO9001:2015, ISO14001:2015 |
View Detail Information
Explore similar products
Pipe Floats for Plastic Sand Discharge Dredging Pipeline Customization Offered
Guide Site Installation Marine Dredging Hose for Sand/Slurry Suction and
DN150 Floating Suction and Discharge Rubber Hose with Flange Water Absorption ＜0
Wear-Proof Wear-Resisting Hose for Water Sand Mud Suction and Discharge at 1
Product Specification
| Model NO. | JB200 | Production Method | Extruding |
| Unit Length | 11.8m/5.8m | Connection | Steel Flanges |
| Working Pressure | 0.4MPa-2.0MPa | Transport Package | Standard Sea Worthy Packaging |
| Specification | DN560 | Trademark | Jiubei |
| Origin | China | HS Code | 3917210000 |
| Supply Ability | 3000m/Month | After-sales Service | Guide Site Installation |
| Material | HDPE | Kind | Thermoplastics Pipes |
| Water Absorption | ＜0.01% | Contraction Percentage | ＜0.4% |
| Tensile Strength | 30~40MPa | Samples | US$ 5/Meter 1 Meter(Min.Order) | Request Samp |
| Customization | Available | Customized Request | Payment Terms | LC, T/T |
| Place of Origin | China | Certification | ISO9001:2015, ISO14001:2015 |
White color Co-extruded HDPE Pipe Induction
PE100 pipe is manufactured with a highly reflective white exterior. This coating is extruded at the same time as the main pipe (co-extruded), forming an integral part of the pipe. This means more than 95% of the pipe is made of standard black PE material, with a thin white coating on the outside to reflect sunlight, reducing the amount of absorbed heat. Co-extruded pipe technology has been around for years but has typically been more expensive than standard black poly pipe. Acu-Tech has invested in new state-of-the-art extrusion machinery that can produce co-extruded PE pipe very efficiently. This means that the cost of co-ex HDPE pipe is not much more than standard black HDPE pipe. Acu-Tech's new machinery can also make white coex pipe with stripes of any colour, to help identify the contents of the pipeline. White pipe with blue stripes designates white water pipe, white pipe with red stripes designates white rural pipe, and white pipe with lilac stripes designates white recycled water pipe. Other colours can be custom made to order. Acu-Therm HDPE pipe is the ultimate solution for above ground applications including temporary water supply, and offers the following advantages over black polyethylene pipe:
Full white coating to minimise solar heating of pipe and contents; testing has demonstrated more than 50% reduction.
Ultra-violet (UV) resistance
Lower pressure rating can be used as lower operating temperature reduces the need to allow for pressure de-rating, enabling thinner wall pipe to be used. This provides cost savings in both material and through increased flow rates.
Reduced thermal expansion / contraction mean less need to 'snake' pipelines
Flexibility allows pipeline to accommodate topographical features.
Excellent solution for above ground applications including temporary water supply.
The inner wall of the HDPE pipe is smooth and does not change with the time of use. The friction resistance is small, which saves energy. The pressure loss is about 30% smaller than that of the steel pipe. A smaller diameter than the steel pipe can be selected. Good hygienic performance, no additives, no possibility of polluting drinking water, ISO standard graded polyethylene material is 0 (lower grade), mold-free material, compared with other commonly used plastic materials, polyethylene's mold resistance It is much higher and does not accumulate scale after long-term use.
The comprehensive performance of PE pipes can be used in the fields of application|Temperature resistance|Low temperature embrittlement temperature is very low, and it can be used in the range of -40ºC to 60ºC, and there will be no pipeline embrittlement during installation and construction in winter.
| Item | Test Method | Unit | UHMWPE Pipe | HDPE Pipe | PA66 Pipe | PVC Pipe | Steel Pipe |
| Viscosity-average Molecular Weight | ISO1628-3 | 104g/mol | 500-1050 | <50 | - | - | - |
| Approx Melting Temperature | ISO11357.3 | ºC | 136 | 129 | 255 | 160 | 1410 |
| Water Absorption | ISO62-1999 | % | <0.01 | <0.01 | 3.8 | 0.5 | - |
| Coefficient of Linear Thermal Expansion | ISO11359-2 | 10-4/ºC | 1.5 | 1.2 | 0.8 | 0.9 | 0.17 |
| Density | ISO1183-1-2004 | g/cm3 | 0.935-0.945 | >0.940 | 1.13-1.15 | 1.4 | 7.8 |
| (0.45MPa) Heat Deformation Temp at 0.45Mpa | ISO75 | ºC | 85 | 71 | 182-224 | ≥54 | 1230 |
| Tensile Strength | ISO527 | MPa | >39 | <25 | 61 | 40 | 550 |
| Yield Strength | ISO527 | MPa | ≥22 | 20 | - | 19 | ≥245 |
| Tensile Elongation | ISO527 | % | ≥250 | ≥350 | 60-300 | 60 | 20 |
| Gap Beam Impact Strength | ISO179 | KJ/m2 | No fracture | <27 | 5.9-10.8 | <10 | No fracture |
| Rockwell Hardness | ISO2039-2 | R | 40 | 33 | 85-120 | 118 | 45(C) |
| Friction Coefficient | ISO8295 | - | 0.05-0.11 | 0.28 | 0.37 | 0.4-0.6 | 0.58 |
| Mortar WearIndex | - | - | 1 | 10 | 5 | 10 | 7 |
| Scaling | - | - | NoScaling | Slight | Slight | Slight | Heavy |
| Corrosion Resistance | - | - | Excellent | Common | Common | Common | Bad |
HDPE Pipe dimensions
National standard nominal wall thickness of HDPE pipe | ||||||||
| GB/T13663.2.2018 | Standard Dimension | |||||||
| SDR41 | SDR33 | SDR26 | SDR21 | SDR17 | SDR13.6 | SDR11 | SDR9 | |
| PE 80 Nominal Working Pressure | ||||||||
| 0.32 | 0.4 | 0.5 | 0.6 | 0.8 | 1.0 | 1.25 | 1,6 | |
| PE100 Nominal Working Pressure | ||||||||
| 0.4 | 0.5 | 0.6 | 0.8 | 1.0 | 1.25 | 1.6 | 2.0 | |
| DN(mm) | Thickness(mm) | Thickness(mm) | Thickness(mm) | Thickness(mm) | Thickness(mm) | Thickness(mm) | Thickness(mm) | Thickness(mm) |
| 16 | 2.3 | |||||||
| 20 | 2.3 | 2.3 | ||||||
| 25 | 2.3 | 2.4 | 3.0 | 3.6 | ||||
| 32 | 2.4 | 3.0 | 3.7 | 4.5 | ||||
| 40 | 2.3 | 3.0 | 3.7 | 4.6 | 5.6 | |||
| 50 | 2.3 | 2.4 | 3.6 | 4.7 | 5.8 | 7.1 | ||
| 63 | 2.5 | 3.0 | 4.3 | 5.6 | 6.8 | 8.4 | ||
| 75 | 2.9 | 3.6 | 5.3 | 6.7 | 8.2 | 10.1 | ||
| 90 | 3.5 | 4.3 | 6.0 | 8.1 | 10.0 | 12.3 | ||
| 110 | 4.2 | 5.3 | 6.7 | 9.2 | 11.4 | 14.0 | ||
| 125 | 4.8 | 6.0 | 7.7 | 10.3 | 12.7 | 15.7 | ||
| 140 | 5.4 | 6.7 | 8.6 | 11.8 | 14.6 | 17.9 | ||
| 160 | 6.2 | 7.7 | 9.6 | 13.3 | 16.4 | 20.1 | ||
| 180 | 6.9 | 8.6 | 10.8 | 14.7 | 18.2 | 22.4 | ||
| 200 | 7.7 | 9.6 | 11.9 | 16.6 | 20.5 | 25.2 | ||
| 225 | 8.6 | 10.8 | 13.4 | 18.4 | 22.7 | 27.9 | ||
| 250 | 9.6 | 11.9 | 15.0 | 20.6 | 25.4 | 31.3 | ||
| 280 | 10.7 | 13.4 | 16.9 | 23.2 | 28.6 | 35.2 | ||
| 315 | 7.7 | 9.7 | 12.1 | 15.0 | 19.1 | 26.1 | 32.2 | 39.7 |
| 355 | 8.7 | 10.9 | 13.6 | 16.9 | 21.5 | 29.4 | 36.3 | 44.7 |
| 400 | 9.8 | 12.3 | 15.3 | 19.1 | 23.9 | 33.1 | 40.9 | 50.3 |
| 450 | 11.0 | 13.8 | 17.2 | 21.5 | 26.7 | 36.8 | 45.4 | 55.8 |
| 500 | 12.3 | 15.3 | 19.1 | 23.9 | 29.7 | 41.2 | 50.8 | 62.5 |
| 560 | 13.7 | 17.2 | 21.4 | 26.7 | 37.4 | 46.3 | 57.2 | 70.3 |
| 630 | 15.4 | 19.3 | 24.1 | 30.0 | 42.1 | 52.2 | 64.5 | 79.3 |
| 710 | 17.4 | 21.8 | 27.2 | 33.9 | 47.4 | 58.8 | 72.6 | 89.3 |
| 800 | 19.6 | 24.5 | 30.6 | 38.1 | 53.3 | 66.2 | 81.7 | |
| 900 | 22.0 | 27.6 | 34.4 | 42.9 | 59.3 | 72.5 | 90.2 | |
| 1000 | 24.5 | 30.6 | 38.2 | 47.7 | 67.9 | 88.2 | ||
| 1200 | 29.4 | 36.7 | 45.9 | 57.2 | 82.4 | 102.9 | ||
| 1400 | 34.3 | 42.9 | 53.5 | 66.7 | 94.1 | 117.6 | ||
| 1600 | 39.2 | 49.0 | 61.2 | 76.2 | 105.9 | |||
| 1800 | 43.8 | 54.5 | 69.1 | 85.7 | 117.6 | |||
| 2000 | 48.8 | 60.6 | 76.9 | 95.2 | ||||
| 2250 | 55.0 | 70.0 | 86.0 | 107.2 | ||||
| 2500 | 61.2 | 77.7 | 95.6 | 119.1 | ||||
Benefits of HDPE pipe for sand/slurry dredging:
| No. | Item | Requirements | |
| 1 | Elongation at break% | ≥350 | |
| 2 | Longitudinal reversion(100ºC), % | ≤3 | |
| 3 | Oxidation induction time(200ºC)min | ≥20 | |
| 4 | Weather resistance after the pipe has accepted the aging energy which equal to or more than 3.5GJ/m2≤ | 80ºC static hydraulic strength(165h) | Non breakage and leakage |
| Percentage of breaking-elongation,% | ≥350 | ||
| Oxidation induction time(200ºC)min | ≥10 | ||
Installation of 11.8m length flanged high wear resistant HDPE pipeline applied for sand/slurry/mine discharging
Cases of 11.8m length flanged high wear resistant UHMWPE pipeline applied for sand/slurry/mine discharging
Company Details
Business Type:
Manufacturer
Year Established:
2020
Total Annual:
10000000-50000000
Employee Number:
101~120
Ecer Certification：
Verified Supplier
Shandong Jiuyuan Steel Structure Co., Ltd. Was established on May 28, 2020 with a registered capital of 10 million yuan. It has the Second-level qualification for professional steel structure contracting issued by the Ministry of Housing and Urban-Rural Development. Our company located in the modern... Shandong Jiuyuan Steel Structure Co., Ltd. Was established on May 28, 2020 with a registered capital of 10 million yuan. It has the Second-level qualification for professional steel structure contracting issued by the Ministry of Housing and Urban-Rural Development. Our company located in the modern...
Get in touch with us
Leave a Message, we will call you back quickly!