VIROCK TEXTILE PRINTING&DYEING MACHINERY CO.,LTD
| Payment Terms | T/T, L/C |
| Supply Ability | as required |
| Delivery Time | 90 days |
| Packaging Details | wooden case |
| No. of Chamber | as demand |
| Exhaust quantity | as required |
| Suitable for | knits/mosquito nets/some special textiles |
| Padder type | two/three bowl |
| Exhaust Quantity | as demand |
| Thickness of the chamber door | 150mm |
| Fabric hold by | pin/clip/combined |
| Dryer Max. Tem | 230 degree |
| Brand Name | VIROCK |
| Model Number | VK |
| Certification | ISO9001 |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Anti - High Temperature Stenter Textile Machine Energy Saving ISO9001
Full Converter Controlled Open Width Fabric Stenter Machine
Mosquito - Net Hot Air Stenter Machine , Textile Finishing Machine Without
1200-3400mm Open Width Stenter Finishing Machine 10%-30% Overfeeding Range
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | as required |
| Delivery Time | 90 days | Packaging Details | wooden case |
| No. of Chamber | as demand | Exhaust quantity | as required |
| Suitable for | knits/mosquito nets/some special textiles | Padder type | two/three bowl |
| Exhaust Quantity | as demand | Thickness of the chamber door | 150mm |
| Fabric hold by | pin/clip/combined | Dryer Max. Tem | 230 degree |
| Brand Name | VIROCK | Model Number | VK |
| Certification | ISO9001 | Place of Origin | CHINA |
| High Light | stenter textile machine ，stenter machine textile finishing machine | ||
Low tension Stenter Finishing Machine , open - width entry , energy conservation
1. Function of stenter Machine
1) Heat setting is done by the stenter for lycra fabric , synthetic and blended fabric.
2) Width of the fabric is controlled by the stenter.
3) Finishing chemical apply on fabric by the stenter.
4) Loop of the knit fabric is controlled.
5) Moisture of the fabric is controlled by the stenter.
6) Spirility controlled by the stenter.
7) GSM of the fabric is controlled by stenter.
8) Fabric is dried by the stentering processs
9) Shrinkage property of the fabric is controlled.
10) Curing treatment for resin, water repellent fabric is done by the stenter.
2. Machine Process:
Open width entry --- Infrared center guider---- Finishing Padder ---- Various tension applicator ---- Infrared center guider --- - Lower Overfeeding device ---- Upper overfeeding --- Edge detecting & uncurler device ---- Pin-on ---- Inlet steaming & edge gumming ----- Chambers for heat setting ----- Pin-off ---- End section ---- Edge cutting & suction ---- Air cooling ---- Plaiting.
3.Technical specifications:
● Roller width: 1600-3800mm
● Working width: 1400-3600mm
● Heat source: Gas/oil/steam/electricity
● Chambers: 2-12
● Width adjustment range: 500-3600mm
● Machine speed: 10~150m/min
● Temperature of chamber: 100-220℃
● Fabric held by: Pin/clip/combined
● Air pressure: above 0.5mpa
● Infeed upper overfeed range: -10% to 80%
● Infeed lower overfeed range: -10% to 80%
● Exit overfeed: -10% to 80%
● PLC & contactor: Mitsubishi/optioal
● Frequency converter: Mitsubishi/optional
4. Components of Stenter Machine:
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1994
Ecer Certification：
Site Member
Founded in 1990, the VIROCK Group is a professional provider of textile machinery, storage equipment and general trade solutions. The Group provides research, development, production, sales, engineering and service of textile equipment and storage equipment. We are an industry-renowned enterprise wh... Founded in 1990, the VIROCK Group is a professional provider of textile machinery, storage equipment and general trade solutions. The Group provides research, development, production, sales, engineering and service of textile equipment and storage equipment. We are an industry-renowned enterprise wh...
Get in touch with us
Leave a Message, we will call you back quickly!