128Gbps Cisco Catalyst C9200L-24P-4X-E Enterprise Switch 24 PoE+ Ports 4x10G

The Cisco Catalyst C9200L-24P-4X-E is an enterprise-class access switch belonging to the Cisco Catalyst 9200 Series, designed for mid-market and branch office deployments. As an entry-level enterprise switch, it integrates Layer 2 and Layer 3 switching capabilities, full PoE+ power supply, and high-speed uplinks, delivering reliable, secure, and scalable network access. Built on Cisco’s intent-based networking (IBN) architecture, it inherits the hardware and software innovation of the Catalyst 9000 Series, balancing simplicity, performance, and security to meet the needs of modern enterprise networks, including office, retail, education, and small-to-medium data center access layers.

• Product Model: C9200L-24P-4X-E
• Product Type: Enterprise-class managed access switch
• Application Layer: Layer 2 and Layer 3 supported
• Form Factor: 1U rack-mountable chassis
• Dimensions (H * W * D): 4.4 cm (1.73 in) * 44.5 cm (17.5 in) * 28.8 cm (11.3 in)
• Weight: 4.71 kg
• MTBF (Mean Time Between Failures): Over 390,000 hours
• Default License Level: Network Essentials

• Switching Capacity: 128 Gbps
• Packet Forwarding Rate: 95.23 Mpps
• Backplane Bandwidth: 80 Gbps
• Jumbo Frame Support: Up to 9198 bytes
• MAC Address Table: 16,000 entries

• Downlink Ports: 24 * 10/100/1000 Mbps RJ-45 ports (full PoE+ support, IEEE 802.3at)
• Uplink Ports: 4 * 1G/10G SFP+ ports (flexible speed adaptation for high-bandwidth uplinks)
• PoE Budget: Total 370W, supporting power supply for PoE+ devices such as wireless APs, IP phones, and IoT terminals
• Port Features: Auto-negotiation, auto-MDI/MDI-X, support for energy-efficient Ethernet (EEE)

• Memory (DRAM): 2 GB
• Flash Memory: 4 GB (for system software and configuration storage)
• Power Supply: Default PWR-C5-600WAC AC power supply (120/230 V, 50/60 Hz); optional redundant power supply for enhanced reliability
• Power Consumption: Typical operation varies by load; optimized for energy efficiency
• Cooling: Fixed redundant fans for stable heat dissipation; low acoustic noise (≤ 43 dBA at 25°C)

• Operating Temperature: -5°C to 45°C
• Storage Temperature: -40°C to 70°C
• Operating Humidity: 5% to 90% (non-condensing)
• Acoustic Noise: LpA 42 dB (typical), 45 dB (maximum) at 25°C (with 24 PoE+ ports loaded)

• Safety Certifications: UL 60950-1, IEC 60950-1
• EMC Certification: FCC Part 15 Class A
• Other Compliance: TAA compliant, RoHS compliant

• Layer 2 Features: Supports VLAN (802.1Q), STP/RSTP/MSTP, Link Aggregation (LACP), LLDP, and port security, ensuring stable Layer 2 network operation.
• Layer 3 Features: Supports static routing, RIP, OSPF, IS-IS routing protocols, enabling flexible inter-VLAN routing and seamless integration with core networks.
• Stacking Support: Supports backplane stacking with up to 80 Gbps stacking bandwidth (optional), enabling centralized management of multiple switches and enhancing network scalability.

• Full PoE+ Support: 24 downlink ports all support PoE+ (IEEE 802.3at), with a total PoE budget of 370W, capable of powering high-power devices such as wireless APs (802.11ax), IP cameras, and IP phones simultaneously.
• Perpetual PoE: Maintains PoE power supply during switch reboot or firmware upgrades, ensuring uninterrupted operation of connected devices.

• MACsec Encryption: Supports AES-128 MACsec encryption on uplink ports, protecting data transmission integrity and confidentiality between switches.
• Access Control: Supports 802.1x authentication, DHCP snooping, Dynamic ARP Inspection (DAI), and IP Source Guard, preventing unauthorized access and network attacks.
• Trustworthy Systems: Built-in hardware and software security mechanisms to protect the switch from tampering and ensure system integrity.

• Cisco IOS XE Operating System: A common OS for the Catalyst 9000 Series, supporting model-driven programmability and streaming telemetry, simplifying network management and maintenance.
• Management Interfaces: Supports SNMP-based monitoring, CLI management, and Cisco DNA Center integration, enabling centralized network deployment, monitoring, and troubleshooting.
• Plug-and-Play (PnP) Enabled: Simplifies new branch or campus device rollouts and network updates, reducing deployment time and labor costs.

• Redundant Components: Optional redundant power supply and fixed redundant fans, with field-replaceable units (FRUs) for zero-downtime maintenance, ensuring 24/7 network availability.
• Cold Patching: Supports firmware upgrades without interrupting network services, minimizing business downtime.
• High MTBF: Rated at over 390,000 hours, delivering long-term stable operation for mission-critical network access.

• Enterprise Office Access Layer: Connects desktop computers, IP phones, and wireless APs, providing stable network access and PoE power supply.
• Branch Office Networks: Ideal for small-to-medium branch deployments, with high-speed uplinks for connection to the enterprise core network and PoE+ support for end devices.
• Retail & Education Environments: Powers IP cameras, POS terminals (retail), and classroom devices (education), supporting high-concurrency access and secure data transmission.
• IoT Deployments: Provides PoE power for IoT terminals, with reliable switching performance and security features to protect IoT network traffic.

Comes with an enhanced limited lifetime warranty, including hardware replacement and technical support, ensuring long-term reliable operation and quick problem resolution. Cisco’s global technical support network provides timely assistance for network deployment and maintenance needs.