Yixing Boyu Electric Power Machinery Co.,LTD
| Payment Terms | L/C, T/T |
| Supply Ability | 100sets/month. |
| Delivery Time | 15~25 days |
| Packaging Details | Container |
| Product type | TY1x120III Tension Machine For Overhead Line |
| Maximum intermittent tension | 130KN |
| Maximum continuous tension | 120KN |
| Maximum back pulling speed | 3km/h |
| Maximum back pulling force | 90kn |
| Total weight | 8100kg |
| Brand Name | BOYU |
| Model Number | TY1x120III |
| Certification | ISO9001 |
| Place of Origin | China |
View Detail Information
Explore similar products
Single Cylinder Diesel Engine Puller Tensioner Speed Reducer German Rexroth
3200kg Overhead Line Stringing Equipment 30kn Hydraulic Puller Tensioner
Stringing Power Line 5 Groove Hydraulic Wire Tensioner Hydraulic Pump Tianjin
103hp Cummins Engine Hydraulic Cable Tensioner Transmission Line Stringing
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 100sets/month. |
| Delivery Time | 15~25 days | Packaging Details | Container |
| Product type | TY1x120III Tension Machine For Overhead Line | Maximum intermittent tension | 130KN |
| Maximum continuous tension | 120KN | Maximum back pulling speed | 3km/h |
| Maximum back pulling force | 90kn | Total weight | 8100kg |
| Brand Name | BOYU | Model Number | TY1x120III |
| Certification | ISO9001 | Place of Origin | China |
| High Light | overhead line hydraulic cable tensioner ，hydraulic wire tensioner stringing equipment ，hydraulic cable tensioner stringing equipment | ||
TY1x120III Tension Machine For Overhead Line 120kN Hydraulic Cable Tensioner
Main technical performance
| Maximum intermittent tension: 130KN |
| Maximum continuous tension: 120KN |
| Corresponding speed: 2.5km/h |
| Maximum payoff speed: 5km/h |
| Corresponding tension: 60KN |
| Maximum back pulling force: 90kn |
| Maximum back pulling speed: 3km/h |
| Diameter of tensile force wheel: 1500mm |
| Groove numbers: 15 |
| Maximum applicable diameter of wire: 40mm |
| Transport dimensions: Length: 5300mm Width: 2300mm Height: 2600mm |
| Total weight:8100kg |
Safe operation rules
Only personnel who are familiar with the safe operation rules and maintenance requirements of this type of tension machine and have received professional training are allowed to operate this tension machine.
(1) The two operators of the stretcher must communicate with each other to avoid serious accidents caused by the tensioning machine when the tensioning machine is not under tension pay-off conditions.
(2) When the tension machine is working, it is forbidden for the operator to give up manipulation or leave the tension machine.
(3) When operating the tension machine, operate the handle and adjust the pressure smoothly, avoid excessive force or too fast, and avoid brutal operation. Pay special attention to the prohibition of drastically reducing or adding tension when tensioning the wire, which will cause the wire to fluctuate too much up and down and damage the spanning frame and other buildings.
(4) During the tension pay-off process, it is strictly forbidden to put the brake lever in the brake position, otherwise it will cause serious accidents.
(5) It is absolutely forbidden to use the anti-pull function for braking.
(6) During the tension pay-off process, the meters should be observed continuously, the temperature of the hydraulic oil should not exceed 85℃; the replenishment pressure (back pressure) should not be lower than 1.8Mpa, not higher than 2.5Mpa; the brake oil pressure should not be lower than 3.5 Mpa, not higher than 6Mpa. Otherwise, it should be shut down immediately for inspection.
(7) The pressure of each safety valve has been pre-adjusted, so don't adjust it randomly! If the tension machine does not work due to unauthorized adjustment of the safety valve, it will bring you a lot of trouble and loss.
(8) The tightening of the nylon bushing fixing bolts should be checked regularly to prevent unnecessary losses due to loosening of the fixing bolts and abrasion of the wires.
(9) When the tension machine is running, keep the engine running at a medium speed to maintain a higher power and prevent the hydraulic oil from overheating.
(10) When tensioning the thread, the "tension wheel direction control" knob should be in the neutral position, and it is strictly forbidden to move it at will, otherwise it will easily cause serious accidents such as thread running.
(12) Under the transmission condition of the tension machine, when changing the transmission direction, the transmission direction can only be changed after the tension wheel is completely stopped.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1997
Total Annual:
15000000-20000000
Employee Number:
150~200
Ecer Certification：
Verified Supplier
Established in 1993, Yixing Boyu Electric Power Machinery Co., Ltd. is a manufacturer specialized in the research, development and production of Electric Power Machinery, CE certified. We are located in beautiful and rich city: Yixing city. We are a High-tech enterprise in Jiangsu Province, with ... Established in 1993, Yixing Boyu Electric Power Machinery Co., Ltd. is a manufacturer specialized in the research, development and production of Electric Power Machinery, CE certified. We are located in beautiful and rich city: Yixing city. We are a High-tech enterprise in Jiangsu Province, with ...
Get in touch with us
Leave a Message, we will call you back quickly!