America British Standard Automatical Cold Roll Forming Machine For C Shape

Product Specification

America British Standard Automatical Cold Roll Forming Machine for C Shape Purlin

The forming machine, also known as the box opening machine, refers to the automatic completion of box opening, forming, and bottom folding. And now the lower part of the tape is pasted, the cardboard box is opened, the bottom of the box is folded according to a certain procedure, and the tape is sealed and sent to the special equipment of the packing machine. Automatic carton forming machine and automatic carton opening machine are assembly line equipment that automatically opens large quantities of cartons, automatically folds the lower cover, and automatically seals the bottom tape. The machines are all controlled by PLC + display screen, which is greatly convenient for operation and is essential for automated scale production. 

C-shaped steel roll forming machine is a C-shaped reed roll forming machine for steel structure industry. The finished products produced by the machinery and equipment are C-shaped steel (rods), which are mostly used to support the beams and wall beams of house construction and factory buildings. The components of the equipment are: unloading rack-feeding port (including hydraulic front shear)-forming host-rear scissors-dragging rack. The applicable material is “strip steel”, the highest yield strength can be 550MPa.

Specification:

Details:

1. Main motor: 15KW

2. Feeding, leveling motor power: 7.5 KW

3. Hydraulic pressure: 15-20MPa

4. Hydraulic power: 7.5 KW

5. two servo motor and four encoder

6. Transmission: Transmission by by Chains 1.2Inch double line

7. Main dimension: 11000 x 1400 x 1400mm (L x W x H)

8. Total weight: 14000kg

9. Purlin specifications:

    For C purlin: width: 80-350mm   height: 40-80mm, small rib: 14-25mm

    For Z purlin: width :80-350mm     height: 40-80mm, small rib: 14-25mm

10. Coil thickness:1.2-3.5mm Q195~235, zinc coils & Hot Rolled coils

11. Working speed: 10-25m/min (not containing punching and cutting time )

12. Forming roller: 17steps

13. Leveling roller:5steps (up 2 and down 3)

14. Rectifying: one step

15. Feeding & guiding: 2 sets ,4 rollers

16. Material of roller: GCr15, quenched

17. Material of main shaft:45﹟ steel

Main features of automatic C Zpurlin roll forming machine
The advantages of single size CZpurlin roll forming machine are as follows:
1.Produce different purlin size without changing rollers or sfacers
2.Pre-cutting design,no need changing cutter for different size
3.Easy operation, low maintenance cost
4.Infinite sizing(any size within machine range),help to save material
5.Optional punch hole at any positon of purlin web side and flange side

Character of main structure:

a. the structure is simple and the appearance of the machine is beautiful because we adopt the shape-steel structure and process as a whole after welding. It has the ability of strong loading and stable operation when running the machine.

b. All the components of machine are from brand-famous enterprise so that they ensure the machine normal function very effectively.

c. we adopt the automatic length-fixed forming and cutting to guarantee the length to be precise and the finished product clear without deforming .

d. it is very easy to install the equipment and suitable for producing in the factory.

e. the machine has features of low noise and high efficiency.

Punching and cutting:

1. punching mold: Cr12 HRC 58-62

2. machine with 3 sets punching system

3. Punching with hydraulic drive

4. punching in longitude wise controlled by PLC, punching at horizontal wise  adjusted by manual hand wheel           

5. Punch details as shown in drawing.

6. Hydraulic Cutting before forming: Cut the sheet before roll forming to required length

7. Cutting motion: The main machine not stop and the continue punching and cutting .

8. Material of blade: CR12with heat treatment

9. Length measuring: Automatic length measuring

10. Tolerance of length: 3m+/- 1.5mm

Machine Pictures: