Xiamen Sunrise Automation Technology Co., Ltd
| Payment Terms | T/T |
| Standards | ISO 21287 |
| Compressed air connection | Internal thread |
| Working pressure min./max. | 2 ... 10 bar |
| Ambient temperature min./max. | -20 ... 70 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| Brand Name | AVENTICS |
| Model Number | ISO 21287, series CCI |
| Place of Origin | china |
View Detail Information
Explore similar products
AVENTICS Series Tie Rod Cylinder C12P – R422715102 Double Acting With Magnetic
Steel Robust Design Pneumatic Piston Rod Cylinder CNOMO NFE 49 - 001 Standard
32mm Diameter Double Acting Tie Rod Cylinder C12P – 7472402181 With Magnetic
compact design Profile pneumatic Cylinders ISO 15552 Series PRA-MS
Product Specification
| Payment Terms | T/T | Standards | ISO 21287 |
| Compressed air connection | Internal thread | Working pressure min./max. | 2 ... 10 bar |
| Ambient temperature min./max. | -20 ... 70 °C | Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air | Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ | Pressure for determining piston forces | 6.3 bar |
| Brand Name | AVENTICS | Model Number | ISO 21287, series CCI |
| Place of Origin | china | ||
| High Light | ISO 21287 Standard Piston Rod Cylinder ，Aluminium Piston Rod Cylinder | ||
Compact Cylinder ISO 21287, Series CCI
Product Description
Product Features
Cylinder housing consists of a continuous aluminium profile, with pressed in front and rear cover
Easy to clean design preventing the accumulation of dirt
Low length tolerance - up to 60% shorter than standard ISO profile cylinders, which makes the Series CCI (ISO 21287) ideally suited for compact machine designs
Simple sensor assembly along the complete cylinder lengths
Additional configurations possible - features such as special strokes, hollow piston rods, heat-resistant versions, or piston rod extensions can be selected – including documentation and CADs
Available in piston diameters from 16 mm to 100 mm
Description:
| Functional principle | double-acting |
| Cushioning | elastic |
| Magnetic piston | with magnetic piston |
| Piston diameter | 50 mm |
| Piston rod thread | M10 |
| Standardization | ISO 21287 |
| Stroke | 80 mm |
| Sealing material | Polyurethane |
| Scraper | Polyurethane |
| ATEX optional | |
| Compressed air connection | G 1/8 |
| Compressed air connection type | Internal thread |
| Standards | ISO 21287 |
| Certificates | ATEX optional |
| Compressed air connection | Internal thread |
| Working pressure min./max. | 1 … 10 bar |
| Ambient temperature min./max. | -20 … 80 °C |
| Medium temperature min./max. | -20 … 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 … 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C … 50 °C. With cylinders with a piston rod extension, dimensions “WH” and “ZB” are increased by the value of the piston rod extension. |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Aluminum |
| End cover | Aluminum |
| Seal | Polyurethane |
| Scraper | Polyurethane |
Product Details:
Company Details
Business Type:
Distributor/Wholesaler,Trading Company,Seller
Year Established:
2022
Total Annual:
3000000-500000
Employee Number:
80~100
Ecer Certification：
Verified Supplier
Xiamen Sunrise Automation Technology Co., Ltd. is a dynamic export - oriented enterprise with a focus on the sale of pneumatic components. We are determined to meet and exceed our customers' expectations. Our goal is to continuously provide quality products and excellent after - sal... Xiamen Sunrise Automation Technology Co., Ltd. is a dynamic export - oriented enterprise with a focus on the sale of pneumatic components. We are determined to meet and exceed our customers' expectations. Our goal is to continuously provide quality products and excellent after - sal...
Get in touch with us
Leave a Message, we will call you back quickly!