HIGH SPEED GLUING CENTER SEALING MACHINE GLUE PVC SLEEVES AND PET FILM MATERIALS

GSHZ-300 high-speed gluing center sealing machine
(1) Technical parameters

 
(2) Summary
This machine is specially used to glue PVC and PET film materials into a tube packaging material..
1:The host adopts a frequency inverter motor, and the closed-loop control is realized by a vector frequency inverter, with accurate speed, and uniform glue application at low and high speeds.
2:The tension of the unwinding based is controlled by synchronous servo motor and synchronous vector operation.
3:Unwinding torque is controlled by synchronous servo motor, acceleration and deceleration tension inertia compensation.
4:The servo-driven ultrasonic tracking web guide machine is used for side and line at precision+-0.1mm, the maximum tracking linear speed is 25mm/s, and the driving range is ±70mm.
5:The unwinding shaft adopts 3 inch air shaft 74mm diameter, linear guide rail, and a linear slide running
6:The diameter of the traction steel roller is Φ90mm×320mm, and the surface is plated with hard soldering and fine grinding.
7:The diameter of the traction rubber roller is Φ90mm×320mm, and the rubber material is polyurethane.
8:The steel roller clutch is executed pneumatically at both ends at the same time, the cylinder diameter is Φ50mm×20mm, and the air pressure can be adjusted
9:The traction rubber roller is driven independently by the synchronous belt and the synchronous servo motor.
10:The rewinding shaft adopts slat-type inflatable shaft, specifications 3 inches Φ74mm
11:Rewinding adopts independent synchronous servo motor, and closed-loop analog control is realized by vector synchronous servo motor, which can realize stable small tension control.
12:Rewinding tension air pressure detection (radius ~ tension curve, speed ~ tension analog control).
13:It will automatically stop when the winding length or diameter is reached, and the minimum unwinding diameter will stop automatically.
14:Glue application adopts stepper motor needle gluing, automatic vector control of flow metering pump, flow can be automatically adjusted, automatically output glue when starting up, and automatically close glue when shutting down. Until the amount of glue sucked back.
15:The intermediate guide roller of the whole machine, the guide roller material is aluminum alloy, the surface of the guide roller is hard anodized (called the brown guide roller), the guide roller is dynamic, static balance is ±0.4g, the glue specification; Φ30mm—Φ300mm, the highest glue speed ; 300m/min, sealing accuracy; ±0.3mm
 

Support and Services:

We provide technical support and services for HIGH SPEED GLUING CENTER SEALING MACHINE GLUE PVC SLEEVES AND PET FILM MATERIALS INTO A TUBE PACKAGING MATERIAL. Our team of experienced technicians and engineers are available to help you with any questions or issues you may have. We offer a wide range of services such as installation, maintenance, troubleshooting, and repairs. In addition, we offer training and consulting to ensure that your machinery is running at its best.

At our facility, we provide a full range of services for HIGH SPEED GLUING CENTER SEALING MACHINE GLUE PVC SLEEVES AND PET FILM MATERIALS INTO A TUBE PACKAGING MATERIAL. Our team of technicians and engineers are available to help you with any questions or issues you may have. From installation to maintenance, our team is fully equipped and ready to assist you.

Our goal is to provide the best technical support and services for HIGH SPEED GLUING CENTER SEALING MACHINE GLUE PVC SLEEVES AND PET FILM MATERIALS INTO A TUBE PACKAGING MATERIAL. Our team of experts is available to answer any questions or concerns you may have. We take pride in providing quality service, and we are committed to ensuring your satisfaction.

Packing and Shipping:

HIGH SPEED GLUING CENTER SEALING MACHINE GLUE PVC SLEEVES AND PET FILM MATERIALS INTO A TUBE PACKAGING MATERIAL is packaged carefully to ensure it arrives safely and in excellent condition. The machines are fully assembled, and then wrapped in film then packed with the fumigation wooden box.

Machines are shipped via air or sea freight, depending on the customer’s preference.

FAQ:

Q: What is the Minimum Order Quantity of HIGH SPEED GLUING CENTER SEALING MACHINE GLUE PVC SLEEVES AND PET FILM MATERIALS INTO A TUBE PACKAGING MATERIAL?

A: The Minimum Order Quantity is 1.