Ping You Industrial Co.,Ltd
| Supply Ability | 1000 |
| Delivery Time | 1-7Day |
| Packaging Details | Box |
| SMT red plastic | SMT red plastic 120-150 degree curing adhesive for posts 30CC |
| Curing temperature | 120-150°C |
| Curing equipment | Reflow soldering |
| Place Of Origin:: | Shandong, China (Mainland) |
| name | no clean solder paste |
| Brand Name | PY |
| Model Number | 03g |
| Place of Origin | China |
View Detail Information
Explore similar products
Red Plastic SMT Solder Paste 120-150 Degree UV Adhesive Glue For Posts 200G
Industrial SMT Solder Paste UV Curing Adhesive For Touch Screen Repair 250G
No Clean Solder Paste , Lead Silver Solder Paste With 25 - 45um BGA Welding
Water Soluble Flux Soldering Paste For Welding Flux PY-6883C Silver 0.2
Product Specification
| Supply Ability | 1000 | Delivery Time | 1-7Day |
| Packaging Details | Box | SMT red plastic | SMT red plastic 120-150 degree curing adhesive for posts 30CC |
| Curing temperature | 120-150°C | Curing equipment | Reflow soldering |
| Place Of Origin:: | Shandong, China (Mainland) | name | no clean solder paste |
| Brand Name | PY | Model Number | 03g |
| Place of Origin | China | ||
| High Light | tin lead solder paste ，no clean solder paste | ||
Red Plastic SMT Solder Paste UV Curing Plastic Bonding Adhesives For Posts 30CC
Packaging Details
200g/bottle; 360g/bottle
A small sample for testing first is avaiable.
Delivery Time
Shipped in 5 days after payment
PY36G is one component epoxy adhesive and a kind of heat cured adhesive. It designed for stencil printing . High bonding strength, high humidity ,high intensity,excellent electrical performance and good storage stability.
Typical Usage
Mainly used for the bonding of the mounted components on SMT.
Properties Uncured
| Typical Value | Range | Test Standard | |
| Appearance | Red cream | ||
| Chemical Type | Epoxy Resin | ||
| Viscosity (Pa.s)(Brookfield RV) Spindle 7 | 200-400 | GB/T 2794-1995 | |
| Thixotropic index | 7 | ||
| Density (g/cm3) | 1.35 | 1.32-1.38 | GB/T 13354-1992 |
| Operate Time at Room Temperature (day@25°C) | 14 |
Curing Condition Recommended
90-120s at 120°C.
60-90s at 150°C
The product will obtain to higher bonding strength when higher curing temperature and longer cured time . the figure curve is the recommended curing temperature and heating rate,Underthe corresponding temperature ,components need the time when they achieve good bonding strength.
Users can set the curing furnace’s temperature parameters according to the solidified characteristic curve of the glue and the heat efficiency of the Reflow Ovens
Performance After Cured
(Cured for 30min@150°C)
Physical Property
| Typical Value | Test Standard | |
| Hardness(ShoreD) | 88 | GB/T2411-1980 |
| Shear Strength(MPa) | 18.5 | GB/T7124-1986 |
| Tg(°C)(DSC) | 105 | ASTM E1545 |
| Dielectric strength(KV/mm) | 26.8 | GB/T408.1-1999 |
| Surface resistance (Ω) | 3.5×1016 | GB/T1410-2006 |
Direction For Use
The product should be recovered to room temperature before use, don't open the aluminum foil package before recovered to room temperature(the recovering time of 300ml packaging at least 2-4 hours).
The product should be used at 25°C ,
The glue viscosity will decline under the higher temperature, which influence printing effect; High humidity can increase the glue of moisture absorption which shorten the opening hours of the glue and influence the glue bonding strength. This product opening time is 48 hours at 25 °C,55% Rh.
Suggest to print at the speed of 20-150 mm/s; Drawknife pressure is 3-4 N/cm (Afer scraping, sheet should be clean, and avoid producing wire drawing); the deviating speed from the sheet is 0.1-3.0 mm/s.
Not cured adhesive which is stick on line wires can be erased with acetone or propylene alcohol ethers.
Please seal and chill when not using up the glue.
Application Process
Notice
Keep away from children.
The workshop should be adequate ventilation.
Wash with soapy water if on skin.
Wash with a lot of soapy water and then go for doctor if in eyes.
For more information, please refer to MSDS.
SMT red plastic 120-150 degree curing adhesive for posts 30CC
| Item | Parameter | curing requirement |
| Appearance | light amber to colorless and transparent liquid | |
| Fixing time | within 10s | |
| Curing tool | UV lamp/UV light | |
| Curing condition | 365 nm | |
| Multi-Part Adhesive | One- component |
1. Make sure the glass is clean and dry.
2. In order to ensure the stability of product, blow the glass surface make sure it is dry without moisture, in winter construction
3. The product is irritated to eye and skin. Thoroughly flush the eyes with water at least 20 minutes, and seek medical attention, if splashed in eyes incaution
4. Only for industrial use, please refer to instructions and Material Safety Data Sheet for health and safety
Company Details
Business Type:
Manufacturer,Agent,Exporter
Year Established:
2013
Total Annual:
5000000-10000000
Employee Number:
100~150
Ecer Certification：
Verified Supplier
Thank you for your time to know our company and lean our production. Ping You Industrial Co.,Ltd Electronic Industry co., Ltd was established in 2010. After 6 years effort and development, now we have become one of the leading SMT /PCB/ SMT equipment,electronic components distributors in China. ... Thank you for your time to know our company and lean our production. Ping You Industrial Co.,Ltd Electronic Industry co., Ltd was established in 2010. After 6 years effort and development, now we have become one of the leading SMT /PCB/ SMT equipment,electronic components distributors in China. ...
Get in touch with us
Leave a Message, we will call you back quickly!