Automated Powder Coating Line with Advanced Pretreatment for Aerospace

Product Specification

Automated Powder Coating Line with Advanced Pretreatment for Aerospace Components

Automated Powder Coating Line Overview:

Aerospace components require the highest quality coating, and our Automated Powder Coating Line with advanced pretreatment fits the bill. The pretreatment stage uses specialized chemicals and processes to ensure the surface of aerospace parts is flawless for powder adhesion. Structurally, the line is built to meet strict aerospace industry standards. It's used to coat components like aircraft engine parts, ensuring their durability and performance in extreme conditions.

Partial parameter description of Automated Powder Coating Line

Dehydrator furnace parameters  

Design requirements:

Hot air circulation heating

Temperature: normal temperature ~180℃ adjustable

The furnace body is made of mechanism rock wool sandwich color steel plate, and each furnace plate is sealed by labyrinth sealing. The joints are first filled with rock wool sealing, and then filled with high temperature sealing glue, so that the sealing effect is good, no hot gas leakage, and energy consumption is reduced

The inner and outer edges of the furnace corner are wrapped to connect the furnace plate into one, which is strong, beautiful and generous

An exhaust hood is set up at the furnace mouth to fully capture the overflowing hot air.

An automatic exhaust port is set at the top of the furnace to maintain the organic solvent in the furnace within a controllable range.

The return air pipe in the furnace is equipped with an adjustable outlet to ensure that the hot air entering the furnace is fully mixed.

The furnace air pipe is insulated with rock wool to reduce heat loss and maintain the working environment temperature of the workshop.

Material details:

Specification: L50000*W1200*2500mm outer size

Furnace frame: made of 100×100×T2.0 square tube welding, furnace frame H2500mm

Side, top and bottom plate: the outer plate is made of 0.8t color coated plate,

The inner plate is made of 0.8t galvanized plate;

Insulation layer: 100kg/m3100mm rock wool

Furnace outer edge: made of 2.0t galvanized plate and welded with the outer furnace plate

Furnace inner edge: made of 1.5t galvanized plate, welded with the inner furnace plate,

Internal supply and return air pipe: made of 1.5t galvanized plate;

External supply and return air pipe: made of 1.5t galvanized plate, with insulation of 100mm;

Exhaust system: 200x200mm (made of SPGt-1.2);

Adjustable air valve: 2 air caps: 1

The surface of the furnace frame is sprayed with computer white paint (or sky blue)

The curing furnace bottom frame is made by welding 100*100*2.0T square tube,

The bottom fixing is 10mm thick iron plate, and the screw is fixed by pulling

The furnace frame is fully welded and connected

The furnace foot is equipped with a protective cover for aesthetic purposes

Process flow of Automated Powder Coating Line:

Loading⇒ Spray pre-degreasing and residue removal⇒main degreasing by swimming + ultrasonic + heating cleaning ⇒ Spray water washing (I) ⇒ Spray water washing (II) ⇒ Activation by swimming ⇒ spray washing (3) ⇒ spray washing (4), swim lay type passivation, spray washing (5) ⇒ spray washing (6) ⇒ pure water cleaning + adjustable automatic blow water, drop of water, dehydration drying furnace, natural cooling, online roast ⇒ under a belt anti-pull installation baked ⇒ on a PP board make automatic coating powder spraying cabinet⇒ hurricane recovery Powder supply center ⇒ Secondary recovery system ⇒ Grinding cabinet ⇒ Curing oven drying ⇒ Natural cooling⇒ QC inspection ⇒ Unloading ⇒ Packaging

Time of each pretreatment process of Automated Powder Coating Line:

Our typical customers:

The equipment is advanced, practical, reliable and safe. The main equipment and components are selected from the famous brand quality products or imported products of national designated production plants