Britec Electric Co., Ltd.
| Packaging Details | carton |
| Delivery Time | 15 days after receipt of deposit |
| Payment Terms | TT |
| Supply Ability | 1000000 per month |
| Insulation Material | Thermoplastic UL94-V0 |
| Transport | By Air, By Sea Or Express |
| Temperature Range | -40°C - 80°C |
| Classification | Type 1 /Class I |
| Warranty | 5 Years |
| Ucpv | 1500V |
| Material | Thermoplastic |
| Module | 3 |
| Brand Name | BRITEC |
| Model Number | BRPV3-1500-6.25 |
| Place of Origin | China |
| Certification | TUV/CB/CE/ROHS/ISO9001 |
View Detail Information
Explore similar products
Solar PV Surge Arrester Protection Device With Gas - Discharge Tube 1000V DC
Class I Class II SPD PV Surge Arrester For Photovoltaic Systems 12.5kA 10 /
IP20 PV Surge Arrester No Leakage Current -40 To 80 ℃ Temp CE Approved
Reliable PV Surge Arrester House Surge Protector Easy Installation
Product Specification
| Packaging Details | carton | Delivery Time | 15 days after receipt of deposit |
| Payment Terms | TT | Supply Ability | 1000000 per month |
| Insulation Material | Thermoplastic UL94-V0 | Transport | By Air, By Sea Or Express |
| Temperature Range | -40°C - 80°C | Classification | Type 1 /Class I |
| Warranty | 5 Years | Ucpv | 1500V |
| Material | Thermoplastic | Module | 3 |
| Brand Name | BRITEC | Model Number | BRPV3-1500-6.25 |
| Place of Origin | China | Certification | TUV/CB/CE/ROHS/ISO9001 |
| High Light | 1500V DC PV surge arrester ，Solar DC SPD lightning protection ，T1 T2 PV surge protection device | ||
Product characteristics:
| Specification | BRPV3-1500-6.25 | |
| SPD classification according to EN61643-31 / IEC61643-31 | Type 1 + Type 2 / Class I + Class II | |
| Max. continuous operating d.c. voltage | Ucpv | 1500V |
| Lightning impulse current (10/350μs) | Iimp | 6.25kA |
| Nominal discharge current (8/20μs) | In | 20kA |
| Max. discharge current (8/20μs) | Imax | 40kA |
| Residucal current | Ipe(DC) | ＜0.02mA |
| Specific energy | W/R | 9.76kJ/Ω |
| Voltage protection level [(DC+/DC-)→PE] | Up | ≤5.2kV |
| Short-circuit current rating | Iscpv | 10kA |
| Response time | tA | ≤25ns |
| Operating temperature range | Tu | -40℃-80℃ |
| Operating state / fault indication | green / red | |
| Cross-section area (Min.) | 4mm² | |
| Cross-section area (Max.) | 35mm² | |
| For mounting on | 35mm Din rail | |
| Enclosure material | Thermoplastic UL94-V0 | |
| Degree of protection | IP20 | |
| Order code | B18074 | |
| Order code (with remote signal) | B18075 |
Type 1+2 PV surge protector Features:
High energy varistors
Ucpv 1500V.
Fault display and remote alarm function
High energy varistors.
The current capacity is 6.25kA with 10/350μs waveform
Application:
Mainly used in the solar photovoltaic power generation DC junction box, the generated solar cell photovoltaic module surge or light is protected by lightning, so as to protect the solar photovoltaic module panel.
Used for surge protection of electrical components in any other DC circuit.
Surge protectors for solar power generation systems
It is suitable for surge protection of DC power supply line equipment of solar power generation system.
Installation and maintenance:
Installed in parallel at the interface of LPZ1 zone and subsequent zones: power controller, power converter, etc.
When the surge arrester is installed under the required conditions, it does not require long-term maintenance, but only routine maintenance. If the color of the visible alarm window changes to red (fault) during use, it indicates that the surge protector is damaged and needs to be repaired or replaced.
| Protection Degree | IP20 |
| Transport | By Air, By Sea Or Express |
| Module | 3 |
| Material | Thermoplastic |
| Shipping Term | TNT, DHL, FEDEX, EMS, UPS |
| Insulation Material | Thermoplastic UL94-V0 |
| Warranty | 5 Years |
| Class | Type 1+2 |
| Temperature Range | -40°C - 80°C |
| For Mounting On | 35mm Din Rail |
Our Main Product
Type 1 surge protection device.
Type 2 surge protection device.
Type 1 + Type 2 surge protection device.
Type 3 surge protection device.
DC (pv, solar) surge protection device.
Network surge protection device
LED Lighting Surge Protection
Britec Imp. & Exp. Wenzhou Co., Ltd. was established in 2003. Britec is a professional surge protective devices (SPD) manufacturer who design and manufacture surge protection devices for power protection, data protection, PV protection etc.
Britec owns in-house laboratory, the lab has 100kA 10/350µs lightning impulse generator, 25kA 10/350µs impulse generator and 120kA 8/20µs generator, 1.2/50µs 20kV combination generator, TOV test station and other test equipment.
The company carries ISO9001, ISO45001 , ISO14001 management system. Various products are TUV, CB CE, RoHS, certified.
Britec has long business relationship with European customers and well experience working with multi-national companies.
Company Details
Business Type:
Manufacturer,Importer,Exporter,Trading Company,Seller
Year Established:
2003
Total Annual:
1-1000
Employee Number:
1~200
Ecer Certification：
Verified Supplier
Britec Electric specialized in research and development of lightening protection devices. The new series of surge protection device Type1,Type2 and Type3,BR PV and SPDs for Date offer the market with a new choice of high quality surge arresters. Established in 2003, is a professional surge protecti... Britec Electric specialized in research and development of lightening protection devices. The new series of surge protection device Type1,Type2 and Type3,BR PV and SPDs for Date offer the market with a new choice of high quality surge arresters. Established in 2003, is a professional surge protecti...
Get in touch with us
Leave a Message, we will call you back quickly!