BR-50GR 440 3+1 440V Surge Protective Device Type 1 2 Protection Electrical

Product Description:

The Type 1 Surge Protection Device (SPD) is a critical component designed to safeguard electrical systems from the damaging effects of transient overvoltages typically caused by lightning strikes and other high-energy disturbances. Engineered for use in low voltage applications, this surge protective device provides robust protection by diverting excessive surge currents away from sensitive equipment, thereby ensuring operational reliability and longevity of electrical installations.

One of the standout features of this Type 1 SPD is its impressive impulse current rating (Iimp) of 50kA. This high surge current capacity makes it particularly effective in locations prone to direct or nearby lightning strikes, where the surge energy levels can be extremely high. The ability to handle such large surge currents ensures that the device can effectively protect downstream electrical components and systems from potentially catastrophic damage.

Designed with versatility in mind, the Type 1 Surge Protection Device is suitable for various rated voltages, including 150V, 275V, 320V, and 440V. This range of rated voltages allows it to be integrated seamlessly into different low voltage distribution networks, making it an ideal choice for residential, commercial, and industrial applications. Its adaptability to multiple voltage levels ensures that users can select the most appropriate model to match their specific electrical system requirements.

Physically, the Type 1 SPD is compact and lightweight, weighing only 1 kilogram. This makes it easy to handle and install without requiring significant structural support. The device is designed as a one-pole product with a width of just 36mm, allowing for efficient use of panel space within electrical distribution boards. Its slim profile enables electricians and system designers to incorporate surge protection without compromising the layout or accessibility of other electrical components.

Type 1 SPDs are typically installed at the origin of the electrical installation, such as the main distribution board or service entrance. This strategic placement allows them to act as the first line of defense against surges entering the system from external sources. By intercepting high-energy transients early, these devices help prevent damage to downstream Type 2 and Type 3 SPDs, as well as to sensitive electronic equipment connected to the network.

In addition to their protective capabilities, Type 1 surge protective devices are designed with durability and reliability in mind. They are constructed from high-quality materials that withstand harsh environmental conditions and electrical stresses. This ensures consistent performance over time, reducing the need for frequent replacements and minimizing maintenance costs.

Choosing the right type 1 spd is essential for ensuring comprehensive surge protection tailored to the unique demands of your electrical system. The device’s rated voltage options of 150V, 275V, 320V, and 440V, combined with its 50kA impulse current rating, provide a balance of performance and flexibility that meets industry standards and safety regulations.

Overall, this Type 1 Surge Protection Device represents a reliable, efficient, and compact solution for protecting low voltage electrical installations from the risks associated with transient overvoltages. Its lightweight design, narrow width, and high surge capacity make it an indispensable component for achieving enhanced system protection and ensuring the safe operation of electrical equipment.

Features:

• Product Name: Type 1 Surge Protection Device
• One pole product width: 36mm
• High discharge capacity with Iimp: 50kA
• Designed for low voltage applications
• Protection level: Type 1+2 for enhanced safety
• Enclosure made from thermoplastic material UL94-V0 rated
• Reliable Type 1 SPDs to safeguard electrical systems
• Effective surge protective device suitable for various installations
• Complies with industry standards for type 1 spd devices

Technical Parameters:

Applications:

The BRITEC BR-50GR 440 3+1 is a high-quality Type 1 surge protection device designed to safeguard electrical systems operating under low voltage conditions. Manufactured in China, this surge protective device boasts certifications from TUV, CB, CE, ROHS, and ISO9001, ensuring reliable performance and compliance with international standards. With an impressive impulse current rating (Iimp) of 50kA and rated voltages of 150V, 275V, 320V, and 440V, it is engineered to effectively protect electrical installations from transient overvoltages caused by lightning strikes and switching operations.

The BRITEC Type 1 SPDs are ideal for use in various application scenarios, particularly in residential, commercial, and industrial environments where electrical safety and equipment protection are paramount. These surge protection devices are typically installed at the main distribution board or service entrance to provide the first line of defense against surges entering the electrical system. Thanks to their robust design and wide operating temperature range of -40°C to 80°C, the BR-50GR 440 3+1 model performs reliably in harsh environmental conditions, making it suitable for outdoor and indoor installations.

In addition to protecting critical infrastructure such as data centers, telecommunications equipment, and industrial machinery, the BRITEC surge protection device is also widely used in renewable energy systems, including solar power installations, where sudden voltage spikes can cause significant damage. The product's packaging in cartons and efficient supply ability of 1,000,000 units per month ensure timely delivery within 15 days after receiving the deposit, facilitating large-scale projects and OEM/ODM customization needs.

The BRITEC BR-50GR 440 3+1 surge protective device offers a practical solution for engineers, electricians, and facility managers seeking to mitigate the risks associated with transient voltage surges. With a minimum order quantity of 10 pieces and payment terms via TT, customers can conveniently procure these reliable Type 1 SPDs to enhance the safety and longevity of their electrical systems. Whether it’s for new installations or upgrading existing protection schemes, this surge protection device stands out for its performance, certification, and adaptability across a wide range of applications.

Customization:

BRITEC offers product customization services for the Type 1 surge protection device, model number BR-50GR 440 3+1. Manufactured in China, this surge protective device is certified with TUV, CB, CE, ROHS, and ISO9001, ensuring high quality and reliability for commercial and industrial applications.

The surge protection device features a thermoplastic UL94-V0 enclosure material, designed for low voltage usage with rated voltages of 150V, 275V, 320V, and 440V. Each unit weighs approximately 1kg and is carefully packaged in cartons to ensure safe delivery.

We require a minimum order quantity of 10PCS, with a supply ability of up to 1,000,000 units per month. The delivery time is 15 days after receipt of deposit, and payment terms are via TT. Trust BRITEC for your surge protection device needs with customizable options tailored to your specifications.

Support and Services:

For technical support and services related to the Type 1 Surge Protection Device, please refer to the product manual and installation guide provided with the device. Our team of experts is dedicated to assisting you with installation, troubleshooting, and maintenance to ensure optimal performance and safety.

We offer comprehensive product support including detailed documentation, FAQs, and instructional videos available on our website. For advanced technical assistance, our support engineers are ready to help diagnose and resolve any issues you may encounter.

Regular maintenance and inspection are recommended to maintain the effectiveness of the surge protection device. Replacement parts and upgrade services are also available to extend the lifespan of your equipment.

Ensure that all installation and service work is conducted by qualified professionals in accordance with local electrical codes and standards. This will guarantee the device operates correctly and provides the necessary protection for your electrical systems.