A1 AUTO PARTS CONNECTION
| Supply Ability | 35000pcs-40000pcs/month |
| Common Name | Cylinder Head Gasket / Engine Head Gasket |
| Product Application | Single-use part. Must be replaced whenever the cylinder head is removed; do not reuse |
| Vehicle Fitment | Please verify VIN and engine code before ordering |
| Delivery Time | 5-8work days |
| Packaging Details | brown box |
| Payment Terms | L/C,D/P,D/A,T/T,, |
| Warranty | 6 to 12 months (varies by supplier) |
| Brand Name | MOPAAFR |
| Model Number | 94810417305、94810417405 |
| Certification | TS16949 |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Vigo Brake Master Cylinders For Hilux KUN26 GGN25 Manual 2KD 47201-0k040 5L
47201-48201 Brake Master Cylinder Toyota Parts For Toyota Lexus RX300 RX350 2010
Mitsubishi Brake Master Cylinder 4D56 4M40 TRITION L200 OEM MN102440
47201-33470 Brake Master Cylinders , Toyota Camry Master Cylinder ACV402008
Product Specification
| Supply Ability | 35000pcs-40000pcs/month | Common Name | Cylinder Head Gasket / Engine Head Gasket |
| Product Application | Single-use part. Must be replaced whenever the cylinder head is removed; do not reuse | Vehicle Fitment | Please verify VIN and engine code before ordering |
| Delivery Time | 5-8work days | Packaging Details | brown box |
| Payment Terms | L/C,D/P,D/A,T/T,, | Warranty | 6 to 12 months (varies by supplier) |
| Brand Name | MOPAAFR | Model Number | 94810417305、94810417405 |
| Certification | TS16949 | Place of Origin | CHINA |
| High Light | Porsche Cayenne cylinder head gasket set ，4.8L V8 cylinder head gasket ，Porsche Cayenne gasket set with warranty | ||
| Year | Trim | Engine | Induction |
|---|---|---|---|
| 2008 | S / GTS | 4.8L V8 | Naturally Aspirated |
| 2008 | Turbo | 4.8L V8 | Turbocharged |
| 2009 | S / GTS | 4.8L V8 | Naturally Aspirated |
| 2009 | Turbo / Turbo S | 4.8L V8 | Turbocharged |
| 2010 | S / GTS / S Transsyberia | 4.8L V8 | Naturally Aspirated |
| 2010 | Turbo / Turbo S | 4.8L V8 | Turbocharged |
| 2011–2013 | S | 4.8L V8 | Naturally Aspirated |
| 2011–2013 | Turbo / Turbo S | 4.8L V8 | Turbocharged |
| 2011–2013 | S Hybrid | 3.0L V6 | Supercharged (Not Compatible) |
| 2014 | S / GTS | 4.8L V8 | Naturally Aspirated |
| 2014 | Turbo / Turbo S | 4.8L V8 | Turbocharged |
| 2014 | S Hybrid | 3.0L V6 | Supercharged (Not Compatible) |
| 2015–2018 | Turbo | 4.8L V8 | Turbocharged |
| 2015–2018 | Turbo S | 4.8L V8 | Turbocharged |
| Part Name | Remarks |
|---|---|
| Cylinder Head Bolts | Single-use (torque-to-yield / angle-tightening method) — must be replaced |
| Intake Manifold Gasket | Recommended to replace after intake manifold removal |
| Exhaust Manifold Gasket | Recommended to replace after exhaust manifold removal |
| Valve Cover Gasket | Recommended to replace simultaneously |
| Timing Chain Cover Seal | Depends on disassembly scope |
| Coolant / Antifreeze | Must be refilled after cylinder head gasket replacement |
| Engine Oil + Oil Filter | Recommended to replace at the same time |
| Step | Details |
|---|---|
| Preparation | Engine must be completely cooled before operation. Disconnect battery negative terminal. Drain coolant and engine oil. |
| Surface Preparation | Cylinder block and cylinder head mating surfaces must be thoroughly cleaned — free of oil, dirt, and old gasket residue. |
| Bolt Replacement | Cylinder head bolts are single-use (torque-to-yield design). They must be replaced with new ones after removal — reusing them is not acceptable. |
| Tightening Sequence | Tighten progressively from the center outward in a cross pattern. Follow 3–4 steps to reach the specified torque. |
| Angle-Tightening (Torque-to-Yield) Procedure | Final stage: rotate the bolts by an additional 90°–180° (refer to the OEM service manual for exact specs). |
| Sealant Application | Apply a small amount of sealant at designated points (strictly follow the OEM service manual instructions). |
| Coolant Refill | Use a vacuum filler or manually bleed the system to prevent air pockets / vapor lock. |
| Pre-Start Inspection | Inspect all hose and line connections. Refill engine oil and coolant before starting the engine. |
| Post-Start Inspection | Let the engine idle and check for leaks, abnormal noise, or overheating. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company,Seller
Year Established:
2000
Total Annual:
200$-500$
Employee Number:
20~50
Ecer Certification：
Verified Supplier
A1 Auto Parts Connection Since 2000,GUANGZHOU ,CHINA A1 Auto Parts Connection was started in 2000, basis on the brake pads,brake shoes and suspension factories ,sourcing and inventory center, and spreading across the West Africa in 2011.A1 always with sharp eyes focus on potential opportu... A1 Auto Parts Connection Since 2000,GUANGZHOU ,CHINA A1 Auto Parts Connection was started in 2000, basis on the brake pads,brake shoes and suspension factories ,sourcing and inventory center, and spreading across the West Africa in 2011.A1 always with sharp eyes focus on potential opportu...
Get in touch with us
Leave a Message, we will call you back quickly!