48647-JD01A LH, 48527-JD01A RH SOCKET KIT-TIE ROD,OUTER FITS Nissan Qashqai J10

Product Specification

This is a pair of premium front outer tie rod ends (steering linkage components), left side 48647-JD01A and right side 48527-JD01A. Manufactured to OEM-grade standards from high-strength forged steel with anti-corrosion surface finish, featuring pre-assembled, factory-greased ball joints with durable rubber dust boots to prevent contamination and extend service life. Internal and external threads match original specifications for precise fitment. Compatible with select Nissan Qashqai, Nissan X-Trail. Pair replacement recommended for balanced steering response and consistent handling. Direct bolt-on installation, no modification required. 100% torque and taper fit tested before shipment, backed by warranty against manufacturing defects.

Product Function & Working Principle

The tie rod end connects the steering rack to the steering knuckle, converting the rotary motion of the steering wheel into the steering angle of the wheels. When you turn the steering wheel, the steering rack pushes or pulls the inner tie rod, and the outer tie rod end transfers that motion to the wheel hub via a tapered stud secured with a castle nut and cotter pin. The ball-and-socket joint allows the suspension to move up and down while maintaining precise steering control. It is a critical component of the steering linkage system, responsible for holding wheel alignment (especially toe angle) and ensuring predictable handling and even tyre wear.

⚠️  Common Failures & Diagnosis

Common symptoms of a worn tie rod end include: excessive steering play (loose steering feel), vehicle pulling/drifting to one side, clunking or rattling noises from the front suspension when cornering or going over bumps, and uneven or feathering tyre wear on the inner/outer edges. A torn rubber dust boot with grease leakage is also a red flag, as moisture and dirt will accelerate ball joint wear.

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory

• 

  Business Type:

  Manufacturer,Distributor/Wholesaler,Exporter,Trading Company,Seller 

• 

  Year Established:

  2000 

• 

  Total Annual:

  200$-500$

• 

  Employee Number:

  20~50 

• 

  Ecer Certification：

  Verified Supplier 

A1 Auto Parts Connection Since 2000,GUANGZHOU ,CHINA A1 Auto Parts Connection was started in 2000, basis on the brake pads,brake shoes and suspension factories ,sourcing and inventory center, and spreading across the West Africa in 2011.A1 always with sharp eyes focus on potential opportu... A1 Auto Parts Connection Since 2000,GUANGZHOU ,CHINA A1 Auto Parts Connection was started in 2000, basis on the brake pads,brake shoes and suspension factories ,sourcing and inventory center, and spreading across the West Africa in 2011.A1 always with sharp eyes focus on potential opportu...

+ Read More