F01-1106010GA Fuel Pump Assembly Fits F011106010GA Chery Jetour X70/X90

Product Specification

Core Product Description

The F01-1106010GA Fuel Pump Module Assembly is an in-tank electric fuel pump for the Chery Jetour X70 and X90 SUV models. Also known as a fuel pump module, fuel sender assembly, or fuel pump, this component is responsible for delivering fuel from the fuel tank to the engine at the correct pressure and flow rate for proper combustion . The module typically includes the electric pump, fuel level sending unit, pressure regulator, strainer, and fuel outlet port as an integrated assembly.

This fuel pump module is designed specifically for vehicles meeting the China VI emission standard, which requires precise fuel delivery and pressure control to comply with stringent emission regulations . The assembly is configured for the electronic fuel injection (EFI) system used in the Jetour X70 and X90 models.

This component is a direct replacement part. As an electric fuel pump, it is typically located inside the fuel tank and is subject to wear over time . Common failure modes include pump motor wear, clogged strainers, and failing pressure regulators, which can lead to drivability issues and poor engine performance .

Product Specifications

Why Choose This Fuel Pump Module Assembly?

Restores Proper Fuel Delivery – A failing fuel pump can cause starting issues, stalling, and poor acceleration. This new module restores correct fuel pressure and flow for reliable engine operation.

Ensures Consistent Engine Performance – The integrated pressure regulator maintains proper fuel pressure for efficient combustion, supporting consistent power delivery and fuel economy.

Prevents Contaminant Damage – The integrated filter protects the fuel injection system from debris and particles that can cause injector clogging and damage.

Provides Accurate Fuel Level Readings – The module includes a fuel level sensor that sends accurate fuel level data to the instrument cluster, ensuring correct gauge readings.

Direct Replacement – This is a complete module assembly designed to replace the original unit – no modifications required. Installation involves removing the old module and installing the new one.

Proven Compatibility – This module is specifically designed for Chery Jetour X70 and X90 models meeting China VI emission standards.

Complete Assembly – This is a complete module assembly, eliminating the need to purchase separate components. All necessary components are integrated into a single unit for convenient replacement.

When Should You Replace It?

Consider replacing your fuel pump module assembly if you experience any of the following symptoms:

• Engine cranks but does not start, or starts only after multiple attempts

• Engine stalls or loses power during driving, especially under load or at high speeds

• Poor acceleration or hesitation when pressing the accelerator

• Whining or buzzing noise coming from the fuel tank area

• Check engine light illuminated with fuel system-related diagnostic trouble codes

• Inaccurate fuel gauge readings (stuck, erratic, or incorrect level display)

• Fuel pump fuse or relay failures due to electrical issues within the module

• The vehicle has high mileage and the fuel pump has never been replaced

Note: Fuel pump modules are wear items that should be inspected when fuel system issues arise. The fuel pump inside the module is an electric component with a limited service life, and replacement of the entire module is recommended for reliable operation .

Features & Functional Notes

Performance Notes:

• The fuel pump is critical for engine starting, performance, and drivability .

• A failing fuel pump can cause hard starting, poor acceleration, stalling, and reduced fuel economy .

• The module is a sealed, in-tank unit and cannot be repaired in most cases; replacement of the complete module is recommended.

 Package Contents

• 1 × F01-1106010GA Fuel Pump Module Assembly

• Protective packaging with part number label

Note: The module includes the complete assembly; no additional components are required.

After-Sales Service & Warranty

This product is covered by our quality assurance. If you have any questions or issues regarding fitment or quality, please contact us and we will respond within 24 hours.

 FAQ

Q1: Does this fit China V models?
A1: This part is specifically designed for China VI emission standard vehicles. China V models may require a different part number.

Q2: What is included with the module?
A2: The module includes the electric pump, fuel level sensor, pressure regulator, strainer, and fuel outlet as a complete assembly.

Q3: What are the symptoms of a failing fuel pump?
A3: Common symptoms include hard starting, poor acceleration, stalling, unusual noise from the fuel tank, and engine surging.

Q4: Can I replace just the pump motor?
A4: The module is typically sold and replaced as a complete assembly. While pump motors may be available separately, replacing the complete module is recommended for reliability.

Recommended Related Products

• Fuel Tank O-Ring Seal

• Fuel Filter