Anti Tailgating 304 Stainless Steel Flap Barrier Turnstile

Product Specification

SUS 304 Stainless Steel Acrylic Wing Turnstile Biometric Access Control

Introduction:

1. Higher flow rate and better anti-tailgate function .
2. Double protections of Mechanical and infrared anti-pinch function.providing more reliable and safer passing.
3 Multi alarm modes:illegal intrusion, anti-intrusion, anti-follow, overtime alarm etc.
4. Anti-rush function,Anti-Reverse,anti-intrusion, anti-follow.
5. LED indicator light :green and red indicate the passing information.
6. Normal open and normal close can be controlled by external button.(for group pass)
7. Auto detect and reset function.
8. Gate auto open when power is off to meet the fire protection requirements.

Features:

1.With fault self-test and alarm prompt function, convenient for user maintenance and use.

2.Through the built-in small push-pull on the main control board, device operating state can be programed.

3.The mechanical structure has anti-pinch and anti-collision function. When the swing arm is blocked during the reset process, the motor automatically stops working within the specified time. Reset again after the default delay (until reset), and the force is very small (≤ 2kg).(In the extreme case, all infrared rays are disabled, and the movement still has mechanical anti-pinch function, and the strength is small and will not cause harm to the human body)

4. Illegal intrusion, trailing alarm, reverse intrusion gate automatically closes

5.Anti-shock function, the arm is automatically locked when no open signal is received.

6.Telescopic arms are adjustable synchronously (for double pendulum)

7.With automatic reset function. After the switch is opened, the system will automatically cancel the user's permission for the pass when there is no pass within the specified time.The reset time is adjustable from 1s to 60s (the system default time is 10s). After the power is cut off, the channel is automatically opened (in accordance with fire protection requirements), and the power-on channel is automatically closed.

8.Infrared sensor reset, infrared sensor anti-trap function (configure 5 pairs of infrared)

9.It can be connected with a variety of devices such as access control systems, consumer systems, electronic ticket systems, biometric systems, and electrostatic testers.

10.The one-way or two-way control personnel can enter and exit, and the infrared sensing in and out channels.

11.Voice prompt function.

12.Remote control and management can be achieved directly through the management computer.

Specification: 

Details:

1.Unique incomplete wheel transmission.
2.Running stable, little noise and no mechanical impact
3.Self-checking-power-on function, if power on, flap barrier will auto get to be held.
4.Flap barrier will auto alarm when some unauthorized person gets in.
5.Various working means can be set in the control panel menu, namely: bi-direction card reading passing, or one direction card reading passing and another passing limits, or one direction card reading passing and another free passing, etc.
6.If power off, arm will open automatically while power on late.
7.It is with RS485 connection for far control arm up and down to satisfy the special needs or fire control requirements.
8.It is with standard electrical interface to connect various kinds of readers and writers for easy integration and also computer far control and management can be realized by computer.
9.Passing direction will be shown by LED and passengers will know which direction is allowed to pass.
10.Re-position function. After card reading, if passenger not through within the specific time, system will auto cancel passing right for this time and the limit passing time length can be set.
11.Optional:
1)Counter and counter display
2)Access controller or card reader
3)Key by-pass
 

FAQ:

1. Can machines be used outside?

    With waterproof function, could be used outside

2. What is the warranty for the machine?

    Whithin two years, if any problems, we will offer the accessories(but you pay the freight cost)

3. When will you make the delivery?

    Regular products:(3-5 days)

4. How does your factory control the quality?

    Quality controlling from the beginning to the ending.

5. What is your MOQ?

    Any quantity is acceptable.

6. Payment term?

    30% by T/T, 70% by T/T before delivery.