Hangzhou Nanyin Trading Co., Ltd.
| Payment Terms | T/T,Western Union |
| Supply Ability | 1000pcs |
| Delivery Time | 3 days |
| Packaging Details | Huawei Original Box |
| Description | 16*10/100/1000BASE-T ports,8*POE+,2*GE SFP ports, 4*10GE SFP+ ports, DIN Rail Mounting, Dual redundant 54 to 57V DC power, Fanless |
| Condition | Original New Huawei |
| Brand Name | Huawei |
| Model Number | S5735I-S8T8P2S4XN-V2 |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
S5735I-S8U4XN-V2 Huawei 8ports PoE++ Industrial Switches with 4 ports 10GE
S5735I-S16T2S4XN-V2 Huawei 16 Ports Industrial Switch
S5735I-S8T4SN-V2 Huawei Industrial Switches 8 Ports
S5735I-S24T8S4XE-QA-V2 Original New Huawei 24 Ports Grade Industrial Switch
Product Specification
| Payment Terms | T/T,Western Union | Supply Ability | 1000pcs |
| Delivery Time | 3 days | Packaging Details | Huawei Original Box |
| Description | 16*10/100/1000BASE-T ports,8*POE+,2*GE SFP ports, 4*10GE SFP+ ports, DIN Rail Mounting, Dual redundant 54 to 57V DC power, Fanless | Condition | Original New Huawei |
| Brand Name | Huawei | Model Number | S5735I-S8T8P2S4XN-V2 |
| Certification | CE | Place of Origin | China |
| High Light | 16 Ports V2 Huawei Industrial Switch ，V2 Huawei Industrial Switch | ||
| Item | Details |
|---|---|
| Description | S5735I-S8T8P2S4XN-V2 (16*10/100/1000BASE-T ports,8*POE+,2*GE SFP ports, 4*10GE SFP+ ports, DIN Rail Mounting, Dual redundant 54 to 57V DC power, Fanless) |
| Part Number | 98012426 |
| Model | S5735I-S8T8P2S4XN-V2 |
| First supported version | V600R024C00 |
| 1 | Two DC power input ports NOTE: The following external power module can be configured: PAC240S56-CN (240 W PoE AC&HVDC Power) | 2 | DI port |
| 3 | DO port | 4 | RS485 port |
| 5 | One console port | 6 | One USB port |
| 7 | Ground screw NOTE: It is used with a ground cable. | 8 | Eight 10/100/1000BASE-T ports |
| 9 | Four 10GE SFP+ ports | 10 | Eight 10/100/1000BASE-T PoE+ ports NOTE: You can run the port combination-mode command to configure the working mode of GE electrical ports, GE optical ports, and 10GE SFP+ Ethernet optical ports. By default, the M0 mode (8 x GE electrical ports and 2 x GE/FE optical ports) is used. You can also change this mode to M1 mode (4 x GE electrical ports + 2 x GE/10GE optical ports).
|
| 11 | Two 1000BASE-X ports or two 10GE SFP+ ports NOTE: You can run the port combination-mode command to configure the working mode of GE electrical ports, GE optical ports, and 10GE SFP+ Ethernet optical ports. By default, the M0 mode (8 x GE electrical ports and 2 x GE/FE optical ports) is used. You can also change this mode to M1 mode (4 x GE electrical ports + 2 x GE/10GE optical ports).
| 12 | - |
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 10/100/1000BASE-T port | RJ45 | A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s. | Ethernet cable |
| 10GE SFP+ optical port | SFP+ | A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s. |
|
| 100/1000BASE-X port | SFP | A 100/1000BASE-X port can send and receive data at 100 Mbit/s or 1000 Mbit/s. By default, the port works as a 100/1000BASE-X port. You can run the port combination-mode command to switch the working mode to 10GE SFP+. After the switching, GE electrical ports 13 to 16 are unavailable. |
|
| Console port | RJ45 | The console port is connected to a console for on-site configuration. | Console cable |
| USB port | USB 2.0 Type A | The USB port can have a USB flash drive connected to upgrade the switch, or transfer configuration files or other files. The USB port can only connect to a USB flash drive that complies with USB 2.0. USB flash drives from different vendors differ in model compatibility and drivers. If a USB flash drive cannot be used, try to replace it with another one from a mainstream vendor. | USB flash drive |
| RS-485 port | 2x5-Pin Phoenix Connector | The RS-485 port is used for data collection.
The default configurations of the RS-485 port are as follows:
| 2x5-Pin Phoenix Connector |
| DI port | 2x5-Pin Phoenix Connector | The DI port is used to check remote communication input and level signals. Signal type: Passive DI signals, Boolean value (short circuit and open circuit) | 2x5-Pin Phoenix Connector |
| DO port | 2x5-Pin Phoenix Connector | The DO port outputs signals so that the connected device can take corresponding actions. Signal type: Passive DO signals, Boolean value (short circuit and open circuit) External power supply: voltage less than 60 V DC and circuit current less than 0.5 A | 2x5-Pin Phoenix Connector |
| No. | Indicator | Name | Color | Status | Description |
|---|---|---|---|---|---|
| 1 | PWR1 | Indicator of power module 1 | - | Steady off | Power module 1 is not supplying power or is abnormal. |
| Green | Steady on | Power module 1 is supplying power properly. | |||
| 2 | PWR2 | Indicator of power module 2 | - | Steady off | Power module 2 is not supplying power or is abnormal. |
| Green | Steady on | Power module 2 is supplying power properly. | |||
| 3 | SYS | System status indicator | - | Steady off | The system is not running. |
| Green | Fast blinking | The system is starting. | |||
| Green | Steady on | In the system startup preparation phase, the SYS indicator is steady green for no more than 30 seconds. | |||
| Green | Slow blinking | The system is running properly. | |||
| Red | Steady on | The system does not work normally after registration. | |||
| 4 | MST | Stack indicator | - | Steady off | The device is not a stack master. |
| Green | Blinking | The device is a stack master or the stack is not deployed. | |||
| 5 | USB | USB-based deployment indicator | - | Steady off | No USB flash drive is installed, or the indicator fails. |
| Green | Steady on | USB-based deployment succeeds. If there is no deployment configuration file, deployment will be repeatedly performed. In this case, the indicator is also steady green. | |||
| Green | Blinking | USB-based deployment is ongoing. | |||
| Red | Steady on | USB-based deployment fails. | |||
| 6 | 1 to 16 | Electrical port indicator (one indicator for each port) | For ports 9 to 16, arrowheads show their positions. A down arrowhead indicates a port at the bottom, and an up arrowhead indicates a port at the top. | Meanings of service port indicators vary in different modes. For details, see Table 4-1352. | |
| 7 | 1 to 6 17 and 18 | Optical port indicator (one indicator for each port) | - | ||
| 8 | 9 to 16 | Service port PoE status indicator | - | Steady off | The port is not supplying power to a powered device (PD). |
| Green | Steady on | The port is supplying power to a PD. | |||
| Green | Blinking | The PD connected to the port is not an IEEE-compliant PD or its power exceeds the maximum power or power threshold of the port. | |||
| Display Mode | Color | Status | Description |
|---|---|---|---|
| Default mode | - | Off | The port is not connected or has been shut down. |
| Green | Steady on | A link has been established on the port. | |
| Green | Blinking | The port is sending or receiving data. |
The device can use a single power module or dual power modules for 1+1 power redundancy.
It can be directly connected to an external 56 V DC power module or a PAC240S56-CN power module.
| Power Module 1 | Power Module 2 | Available PoE Power | Maximum Number of Ports (Fully Loaded) |
|---|---|---|---|
| PAC240S56-CN | - | 200 W |
|
| - | PAC240S56-CN | 200 W |
|
| PAC240S56-CN | PAC240S56-CN | 240 W |
|
| External 56 V DC power module | - | 240 W (maximum) |
|
| - | External 56 V DC power module | 240 W (maximum) |
|
| External 56 V DC power module | External 56 V DC power module | 240 W (maximum) |
|
Company Details
Business Type:
Distributor/Wholesaler
Year Established:
2016
Total Annual:
$2000000-US$5000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
HI-NETWORK Company (Hangzhou Nanyin Trade Co.,LTD) was based on 2016 Year. Nearly 10 years experience in Networking Brands Field, Included: De ll, HPE, Oracle, Supermicro, Cisco Hua-Wei ZTE etc. Customer are over 102 countries till now with good support. Welcome contact us for more enquiry! HI-NETWORK Company (Hangzhou Nanyin Trade Co.,LTD) was based on 2016 Year. Nearly 10 years experience in Networking Brands Field, Included: De ll, HPE, Oracle, Supermicro, Cisco Hua-Wei ZTE etc. Customer are over 102 countries till now with good support. Welcome contact us for more enquiry!
Get in touch with us
Leave a Message, we will call you back quickly!