ANHUI TECHFLY ROBOTICS TECHNOLOGY CO., LTD
| Payment Terms | L/C,T/T |
| Supply Ability | 10000 |
| Delivery Time | 4-6 weeks |
| Packaging Details | wooden box |
| Maximum fluid pressure | 100 psi（7 bar，0.7 MPa） |
| Maximum paint flow | 1.5 GPM (5.5 l/min) @70cps viscosity, 100 psi |
| Range of regulation | 5-100 psi（0.3-7 bar，0.03-0.7 MPa Range of regulation ） |
| Infiltration components | 316 stainless steel, PTFE, FFKM |
| Fluid outlet | 1/4"PT（f ） |
| Weight | 1.36kg |
| Brand Name | techfly |
| Place of Origin | China |
View Detail Information
Explore similar products
Automatic Air Spray Gun
CV3000 Stainless Steel High-pressure Color Change Valve For Robotic Painting
Fluid AccuFlo 1kg/ 2kg Two-component Gear Pump Metering And Proportioning System
Fluid AccuFlo 2KP Pro Volumetric Metering And Proportioning System For Robots
Product Specification
| Payment Terms | L/C,T/T | Supply Ability | 10000 |
| Delivery Time | 4-6 weeks | Packaging Details | wooden box |
| Maximum fluid pressure | 100 psi（7 bar，0.7 MPa） | Maximum paint flow | 1.5 GPM (5.5 l/min) @70cps viscosity, 100 psi |
| Range of regulation | 5-100 psi（0.3-7 bar，0.03-0.7 MPa Range of regulation ） | Infiltration components | 316 stainless steel, PTFE, FFKM |
| Fluid outlet | 1/4"PT（f ） | Weight | 1.36kg |
| Brand Name | techfly | Place of Origin | China |
| High Light | Stainless steel Fluid Pressure Regulator ，Stainless steel Back Pressure Regulator | ||
Fluid Pressure Regulator / Back Pressure Regulator are used in air spray systems equipment
Pressure Regulator
The stainless steel coating pressure regulator is used in the Utheisa Kong gas spraying system to ensure precise and reliable control of fluid pressure for spray guns, dispensing valves, or atomizing nozzles. Installed on the output device of a circulation pipeline or pump, the regulator is used to reduce the main pipeline pressure to maintain the required fluid pressure for spray guns, dispensing valves, or atomizing nozzles.
It is used to regulate the upstream pressure of coatings. For solvent-based coatings, the FRL10Y/30Y models are recommended, while for water-based coatings and high-solid-content coatings, the FRL10S/30S models are suitable.
Back Pressure Valve
Stainless steel coating back pressure valves are used in the Utheisa Kong gas spraying system. The valve is mechanically operated to open the outlet and redirect excess material back when the predetermined pressure is reached, thereby maintaining the supply pressure-limited at the set value. These valves are utilized in circulation systems.
They regulate downstream coating pressure with low shear and a straight-through design, minimizing the risk of clogging. Suitable not only for solvent-based coatings but also for water-based and high-solid-content coatings.
Applications
• Auto Parts
• Furniture & Wood Finishing
• Sanitary Ceramics & Bathroom Products
•3C
•General Industrial: Hardware, Plastics, and More
Regulator parts | |||
| No. | Name | Quantity | Code |
| 1 | Valve key | 1 | 260414700113 |
| 2 | M5x10 | 6 | 200101000005 |
| 3 | Valve top cover | 1 | 260414700145 |
| 4 | pad | 1 | 260414700099 |
| 5 | Adjust the pressure lever | 1 | 260414700100 |
| 6 | screw cap | 1 | 260414700101 |
| 7 | spring | 1 | 200107000024 |
| 8 | platen | 1 | 260414700148 |
| 9 | sealing plate | 1 | 260414700149 |
| 10 | Diaphragm | 1 | 26014G000451 |
| 11 | O molding ring | 1 | 200503000113 |
| 12 | Fix the membrane plate screw | 1 | 260414700307 |
| 13 | pressure gage | 1 | 100PSI:200515000031 300PSI:200515000032 |
| 14 | Pressure gauge installation pipe | 1 | 260414700153 |
| 15 | The circle of squares | 1 | 260414700217 |
| 16 | lampstand | 1 | 260414700306 |
| 17 | Joint gasket 1 | 1 | 260414700146 |
| 18-1 | Seal blocks | 1 | 260414700147 |
| 18-2 | Seal blocks | 1 | 260414700362 |
| 19 | gladhand | 1 | 260410400829 |
| 20 | Joint gasket 2 | 1 | 260414700186 |
| 21 | lifting pin | 1 | 260414700107 |
| 22-1 | loose joint | 1 | 260414700151 |
| 22-2 | loose joint | 1 | 260414700317 |
| 23 | Feed joint cap | 1 | 260414700152 |
| 24 | Ceiling 1 | 1 | 260414700312 |
| 25 | Valve ball | 1 | 200528000048 |
| 26 | Bao Ta Spring | 1 | 200107000052 |
| Back pressure valve parts | |||
| No. | Name | Quantity | Code |
| 1 | Valve key | 1 | 260414700113 |
| 2 | M5x10 screws | 6 | 200101000005 |
| 3 | Valve top cover | 1 | 260414700145 |
| 4 | pad | 1 | 260414700099 |
| 5 | Adjust the pressure lever | 1 | 260414700100 |
| 6 | screw cap | 1 | 260414700101 |
| 7 | spring | 1 | 200107000024 |
| 8 | Membrane plate | 1 | 260414700148 |
| 9 | sealing plate | 1 | 260414700149 |
| 10 | Diaphragm | 1 | 26014G000451 |
| 11 | O molding ring | 1 | 200503000113 |
| 12 | Back pressure valve seal head | 1 | 260414700183 |
| 13 | Valve ball | 1 | 260414700183 |
| 14 | gladhand | 1 | 260410400829 |
| 15 | Back pressure valve sealing base | 1 | 260414700185 |
| 16 | Tighten the adapter | 1 | 260414700187 |
| 17 | Joint gasket 1 | 1 | 260414700186 |
| 18 | Joint gasket 2 | 1 | 260414700146 |
| 19 | end cap | 1 | 200211000001 |
| 20 | lampstand | 1 | 260414700323 |
| 21 | The circle of squares | 1 | 260414700217 |
| 22 | Pressure gauge installation pipe | 1 | 200503000113 |
| 23 | pressure gage | 1 | 100PSI:200515000031 300PSI:200515000032 |
| Technical parameters of back pressure valve | ||
| Order code | 26053C000037(BRL1) | 26053C000010(BRL2) |
| Maximum fluid pressure | 100 psi(7 bar,0.7 MPa) | 300 psi(21 bar,2.1 MPa) |
| Maximum paint flow | 1.5 GPM (5.5 I/min)@70cps viscosity,100 psi | 3 GPM(11 /min)@70cps viscosity,200 psi |
| Range of regulation | 5-100 psi(0.3-7 bar,0.03-0.7 MPa) | 5-300psi(0.3-21bar,0.03-2.1MPa) |
| Infiltration components | 316 stainless steel,PTFE,FFKM | |
| Fluid inlet | φ6×8mm hose connector (optional) | |
| Fluid outlet | 1/4"PT(f) | |
| Weight | 1.36kg | |
| Technical parameters of voltage regulator | ||||
| Order code | 26053C000002 [Water-based FRL10S] | 26053C000006 [Water-based FRL30S] | 26053C000040 [Oily FRL10Y] | 26053C000039 [Oily FRL30Y] |
| Maximum fluid pressure | 100psi(7bar,0.7MPa) | 300psi(21bar,2.1MPa) | 100psi(7bar,0.7MPa) | 300psi(21bar,2.1MPa) |
Maximum paint flow | 1.5GPM(5.5 I/min) @70cps viscosity, 100psi | 3GPM(11 litres/min) @70cps viscosity,200psi | 1.5GPM (5.51/min) @70cps viscosity, 100psi | 3GPM(11 litres/min) @70cps viscosity,200psi |
| Range of regulation | 5-100psi(0.3-7bar, 0.03-0.7MPa) | 5-300psi(0.3-21bar, 0.03-2.1MPa) | 5-100psi(0.3-7bar, 0.03-0.7MPa) | 5-300psi(0.3-21bar, 0.03-2.1MPa) |
| Infiltration components | 316 stainless steel,PTFE,FFKM | |||
| Fluid inlet | 3/8"PT()livejoint | |||
| Fluid outlet | φ6×8mm hose connector (optional) | |||
| Weight | 1.36kg | |||
Contact us
Zhenglei (Managing Director)
MP: +86-18655370553
Email: Zhenglei@techflyrobot.com
Fengor_Hu (Executive Director)
MP:+86-15665538866 (whatsapp)MP: +86-18356576525(wechat )
Skype: hufengguang1980
Email: hufengguang@techflyrobot.com
Address: No. 39, Weisi Road, Jiujiang Economic Development Zone, Wuhu City, Anhui Province,China.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter
Total Annual:
>1000000
Employee Number:
>100
Ecer Certification：
Verified Supplier
ANHUI TECHFLY ROBOTICS TECHNOLOGY CO., LTD Industrial robot , AGV , cobot manufacturer partners to provide all products and surrounding equipment including ,welding machine ,torch ,positioner , Painting gun ,pump,valve ; gripper ,safety fence ,conveyor etc. Automation solution config, equipment ,inc... ANHUI TECHFLY ROBOTICS TECHNOLOGY CO., LTD Industrial robot , AGV , cobot manufacturer partners to provide all products and surrounding equipment including ,welding machine ,torch ,positioner , Painting gun ,pump,valve ; gripper ,safety fence ,conveyor etc. Automation solution config, equipment ,inc...
Get in touch with us
Leave a Message, we will call you back quickly!