ASTM A268 TP410 Seamless Ferritic Stainless Steel Heat Exchanger Tube

Product Specification

ASTM A268 TP410 Seamless Ferritic Stainless Steel Heat Exchanger Tube

ASTM A268 TP410 is a high-performance specification primarily used for heat exchanger tubes. These tubes are designed for applications requiring both exceptional corrosion resistance and excellent mechanical properties at elevated temperatures. Below you will find a comprehensive overview of the ASTM A268 TP410 seamless tube, including its material characteristics, typical applications, and key manufacturing details.

1. Material Overview

ASTM A268 specifies ferritic stainless steel and heat-resistant tubes used in high-temperature and corrosive environments. TP410 is a Grade 410 stainless steel alloy, part of the martensitic stainless steel family, known for its high strength, toughness, and good corrosion resistance.

Key Composition (TP410, UNS S41000):

• Carbon (C): 0.08%–0.15%
• Chromium (Cr): 11.5%–13.5%
• Manganese (Mn): ≤1.00%
• Silicon (Si): ≤1.00%
• Nickel (Ni): ≤0.75%
• Sulfur (S): ≤0.030%
• Phosphorus (P): ≤0.040%

This chemical composition enhances the material's hardness, mechanical performance, and corrosion resistance in mildly acidic and oxidizing environments.

2. Key Features

The ASTM A268 TP410 seamless carbon steel heat exchanger tubes exhibit several desirable features:

Excellent Corrosion Resistance:

• Resists corrosion in mildly acidic, alkaline, and oxidizing environments.
• With high chromium content, TP410 naturally forms an oxide layer that improves resistance to rust.

Heat Resistance:

• Designed for heat exchangers and other systems operating at high temperatures (up to 1200°F, or 650°C).
• Suitable for cyclic heating/cooling conditions due to its stability and wear resistance.

Mechanical Strength:

• High yield and tensile strength due to its martensitic structure.
• Excellent wear and abrasion resistance, making it suitable for heat exchangers in rugged environments.

Seamless Construction:

• Seamless tubes provide:
  • Superior pressure resistance compared to welded tubes.
  • Higher dimensional accuracy and smooth internal surface for optimized heat transfer performance.

3. Properties

Mechanical Properties:

• Tensile Strength (min): 415 MPa (60 ksi)
• Yield Strength (0.2% offset, min): 205 MPa (30 ksi)
• Elongation (min): 20% (in 50mm gauge length)

Physical Properties:

• Density: 7.75 g/cm³
• Thermal Conductivity: 23.9 W/m·K at 100°C
• Modulus of Elasticity: 200 GPa

Toughness:

• Exceptional resistance to cracking or deformation under thermal fluctuation and working stresses.

4. Applications

ASTM A268 TP410 tubes are widely used in various industries, especially for heat transfer systems in high-temperature and corrosive working conditions:

1. Heat Exchangers:

   • Thermal transfer equipment for power plants, refineries, and chemical plants.
   • Ideal for processing steam condensers, pressure vessels, etc.

2. Oil & Gas Industry:

   • For tubing in oil refineries and petroleum processing systems requiring high corrosion resistance.

3. Chemical Industry:

   • Handles corrosive processing fluids and gases in chemical plants.

4. Food and Beverage Industry:

   • Often used in food-grade heat exchangers due to its sanitary, corrosion-resistant properties.

5. Marine Applications:

   • Suitable for seawater cooling systems and desalination plants.

5. Benefits of Using ASTM A268 TP410 Tubes

• Long service life with low maintenance requirements.
• Superior resistance to oxidation, scaling, and wear.
• Stable performance in high-pressure and high-temperature environments.
• Excellent cost-to-performance ratio.