YUHONG HOLDING GROUP CO., LTD
| Payment Terms | T/T, L/C at sight |
| Supply Ability | 1000 TONS / month |
| Delivery Time | Depends on order quantity |
| Packaging Details | Steel frame wooden case with plastic cap |
| Alloy Type | Alloy Steel |
| Form | Seamless tube |
| Diameter | 3.18-152.4mm |
| Wall Thickness | 0.41mm - 25.4mm |
| Applications | Boilers, heat exchangers, superheaters, HRSG |
| Brand Name | YUHONG |
| Model Number | ASTM A213 / ASME SA213 T9 |
| Certification | ISO 9001/TUV/PED |
| Place of Origin | China |
View Detail Information
Explore similar products
ASTM A335 P11 Seamless Pipe For Boiler Heat Exchanger For High Temperature Steam
ASME SA334 GR.6 Carbon Steel，Low Temperature，Seamless Tube For Condenser Tube
Boiler Membrane Water Wall Panel – High Efficiency Panels
A213 Gr.T5 Cr-Mo Alloy Steel Seamless Boiler Tubes Used In Heat Recovery Steam
Product Specification
| Payment Terms | T/T, L/C at sight | Supply Ability | 1000 TONS / month |
| Delivery Time | Depends on order quantity | Packaging Details | Steel frame wooden case with plastic cap |
| Alloy Type | Alloy Steel | Form | Seamless tube |
| Diameter | 3.18-152.4mm | Wall Thickness | 0.41mm - 25.4mm |
| Applications | Boilers, heat exchangers, superheaters, HRSG | Brand Name | YUHONG |
| Model Number | ASTM A213 / ASME SA213 T9 | Certification | ISO 9001/TUV/PED |
| Place of Origin | China | ||
| High Light | ASTM A213 T9 boiler tube ，seamless U bend boiler tube ，high temperature resistant boiler tube | ||
ASTM A213 T9 Alloy Steel Seamless U Bend Tube Boiler Tube High Temperature Resistance
ASTM A213 is a standard specifically for the core material of seamless steel tubes used in heat exchange equipment operating under high pressure and high temperature conditions.
Tubes manufactured according to this standard are widely used in boilers, superheaters, reheaters, heat exchangers, condensers, and other equipment.
ASTM A213 T9 SMLS Tube belongs to the T-series materials, primarily composed of low-alloy chromium-molybdenum steel, and is characterized by its high-temperature resistance. T9 is a ferritic alloy steel with a composition of 9Cr-1Mo-Si.
The average and minimum wall thicknesses of tubes under this standard are acceptable, so specific definitions are necessary.
| Chemical Composition (%) | ||
| Element | Standard Requirement (≤) | Typical Value / Note |
| Carbon (C) | 0.15 max | 0.09–0.13 |
| Manganese (Mn) | 0.30–0.60 | 0.40–0.60 |
| Phosphorus (P) | 0.025 max | 0.020 max |
| Sulfur (S) | 0.025 max | 0.015 max |
| Silicon (Si) | 0.25–1.00 | 0.50–0.80 |
| Chromium (Cr) | 8.00–10.00 | 8.50–9.50 |
| Molybdenum (Mo) | 0.90–1.10 | 0.95–1.05 |
| Iron (Fe) | Balance | Balance |
| Others | — | Residuals |
| Mechanical Properties | ||
| Property | Standard Requirement | Note / Condition |
| Tensile Strength, min | 415 MPa (60 ksi) | |
| Yield Strength, min | 205 MPa (30 ksi) | 0.2% offset |
| Elongation in 2 in (50 mm), min | 30% | For wall thickness ≥ 0.007 in (0.18 mm) |
| Hardness, max | 179 HBW | Brinell Hardness (typical) |
| Heat Treatment | Full Anneal | Or normalized and tempered |
Applications and Advantages of T9 Material:
T22 is the most economical mainstream choice below approximately 580°C.
T9 offers high cost-effectiveness and can replace T22 in high-temperature applications, especially in the 565°C to 595°C range, where its resistance to steam oxidation is a core advantage.
When the temperature consistently exceeds approximately 595°C, or the pressure is higher, more advanced alloys such as T91/T92 should be selected to take advantage of their significantly higher creep strength.
When the temperature consistently exceeds approximately 650°C, austenitic stainless steel should generally be considered.
1. Low-temperature/terminal superheaters and reheaters in high-pressure power plant boilers
2. Boilers in petrochemical heating furnaces
3. Heat exchangers (shell side/tube side with corrosive media)
4. Upgrading and replacing T22 tube sections in old units
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
1990
Total Annual:
50M-75M
Employee Number:
50~850
Ecer Certification：
Verified Supplier
.gtr-container-k7p2x9 { font-family: Arial, Helvetica, "Times New Roman", Arial, sans-serif; font-size: 14px; line-height: 1.6; color: #000000; padding: 16px; max-width: 100%; box-sizing: border-box; } .gtr-container-k7p2x9 p { margin-top: 0; margin-bottom: 1em; text-align: lef... .gtr-container-k7p2x9 { font-family: Arial, Helvetica, "Times New Roman", Arial, sans-serif; font-size: 14px; line-height: 1.6; color: #000000; padding: 16px; max-width: 100%; box-sizing: border-box; } .gtr-container-k7p2x9 p { margin-top: 0; margin-bottom: 1em; text-align: lef...
Get in touch with us
Leave a Message, we will call you back quickly!