YUHONG HOLDING GROUP CO., LTD
| Delivery Time | Depends on order quantity |
| Payment Terms | T/T,L/C |
| Supply Ability | 800 Tons / Month |
| Packaging Details | Wooden case/ Ply-Wooden Cases with Steel Frames |
| Model Number | HEAT EXCHANGER TUBE |
| Certification | ASME, ABS, DNV-GL , BV, LR , KR, CCS, PED, TUV, ISO9001, AD2000 |
| Brand Name | YUHONG |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
ASME SA179 Carbon Steel Seamless U Bend Tube for Shell & Tube Heat Exchanger
ASME SB163 UNS N04400 (Monel 400) U-Bend Seamless Tube for Heat Exchanger
ASTM B622 C22 Seamless Nickel Alloy Steel Tube, For Marine Environments
ASME SA179 A179 Carbon Steel Cold Drawn Steel Heat Exchanger Tube Coil for
Product Specification
| Delivery Time | Depends on order quantity | Payment Terms | T/T,L/C |
| Supply Ability | 800 Tons / Month | Packaging Details | Wooden case/ Ply-Wooden Cases with Steel Frames |
| Model Number | HEAT EXCHANGER TUBE | Certification | ASME, ABS, DNV-GL , BV, LR , KR, CCS, PED, TUV, ISO9001, AD2000 |
| Brand Name | YUHONG | Place of Origin | CHINA |
| High Light | ASTM A789 S32750 Seamless Tube ，High-Strength Heat Exchanger Tubing ，Severe Corrosive Service Super Duplex Tube | ||
Ladle Analysis per ASTM A789
| Element | Content (%) | Element | Content (%) |
|---|---|---|---|
| Carbon (C) | ≤ 0.030 | Nickel (Ni) | 6.0 - 8.0 |
| Manganese (Mn) | ≤ 1.20 | Chromium (Cr) | 24.0 - 26.0 |
| Phosphorus (P) | ≤ 0.035 | Molybdenum (Mo) | 3.0 - 5.0 |
| Sulfur (S) | ≤ 0.020 | Nitrogen (N) | 0.24 - 0.32 |
| Silicon (Si) | ≤ 0.80 | Copper (Cu) | ≤ 0.50 |
Balance: Iron (Fe)
Source: ASTM A789 / ASME SA789 specification
The elevated chromium, molybdenum, and nitrogen content drives the material's resistance to chloride-induced localized corrosion - a critical factor in heat exchanger tube bundle longevity.
| Property | Requirement (ASTM A789) |
|---|---|
| Tensile Strength, min | 800 MPa (116 ksi) |
| Yield Strength (0.2% offset), min | 550 MPa (80 ksi) |
| Elongation (in 2 in. or 50 mm), min | 15% |
| Hardness, max | 32 HRC / 300 HBW |
| Heat Treatment Temperature | 1025 - 1125°C (rapid cooling) |
| Size Range | OD Tolerance | Wall Thickness Tolerance |
|---|---|---|
| ≤ 12.7 mm OD | ± 0.13 mm | ± 15% (avg wall) |
| 12.7 < OD ≤ 38.1 mm | ± 0.13 mm | ± 10% (avg wall) |
| 38.1 < OD ≤ 88.9 mm | ± 0.25 mm | ± 10% (avg wall) |
| 88.9 < OD ≤ 139.7 mm | ± 0.38 mm | ± 10% (avg wall) |
Tolerances per ASTM A1016/A1016M
ASTM A789 specifies seamless or welded manufacturing with no filler metal added. For seamless S32750 tubing, the cold drawing process is standard, followed by solution annealing at 1025-1125°C with rapid water or air quenching to maintain the balanced dual-phase microstructure.
Beyond bare tube supply, Yuhong Group provides fully integrated heat exchanger components:
| Component | Common Materials | Service |
|---|---|---|
| Tube Sheets | SA105, SA182 F51, F53 | Forged or rolled, drilled to tube pattern |
| Baffles | SA516 Gr.70, duplex grades | Segmental or disc-doughnut design |
| Channel Covers / Heads | SA105, SA350 LF2 | Forged carbon or low-temp service |
| U-Tubes | Same as straight tubes | Custom bend radii per TEMA requirements |
ASTM A789 S32750 seamless tubes are specified for heat transfer equipment in severe service environments:
Q1: Can ASTM A789 S32750 tubes be bent into U-tubes?
Yes, but the bend radius should be sized to maintain wall thickness ≥ the minimum specified wall, and stress relief after bending is generally not recommended for super duplex grades. Post-bend solution annealing is required if significant deformation occurs.
Q2: What is the maximum service temperature for S32750?
Prolonged exposure above 600°F (316°C) can lead to embrittlement from sigma phase precipitation. For heat exchanger service, design should keep metal temperatures below this threshold.
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
1990
Total Annual:
50M-75M
Employee Number:
50~850
Ecer Certification：
Verified Supplier
Yuhong Holding Group equipments production base at Jiangsu Jiangyin City, Jinjiang City and Yancheng City. Total production area around 184000 square meters, main products : Heat Exchanger, Condenser, Pressure Vessel , Fired Heater, Economizer, Columns, Reactor. Jinjiang Factory: Main Products: ... Yuhong Holding Group equipments production base at Jiangsu Jiangyin City, Jinjiang City and Yancheng City. Total production area around 184000 square meters, main products : Heat Exchanger, Condenser, Pressure Vessel , Fired Heater, Economizer, Columns, Reactor. Jinjiang Factory: Main Products: ...
Get in touch with us
Leave a Message, we will call you back quickly!