ASTM A179 / ASME SA179 HEAT EXCHANGER TUBE – SEAMLESS COLD-DRAWN CARBON STEEL

ASTM A179 / ASME SA179 HEAT EXCHANGER TUBE – SEAMLESS COLD-DRAWN CARBON STEEL TUBE FOR SHELL AND TUBE HEAT EXCHANGER

ASTM A179 / ASME SA179 seamless tubes are produced in various configurations to meet specific application requirements, including straight tubes, U-bend tubes, coil tubes, and fin tubes. The material is selected for its consistent quality, good ductility, and excellent thermal conductivity, making it ideal for pressure-containing components in heat transfer systems. Each tube is strictly subjected to various tests to ensure product quality.

U-Bend Tube Manufacturing Process

U-bend tubes are manufactured after straight tubes are produced. The bending operation is performed in the cold state on an automatic U-bending machine. To ensure that wall thinning and diameter ovality are kept under control, a mandrel is inserted into the tubes during the bending process. The U-bend portion is subsequently stress relieved under controlled conditions and cycles to provide longer service life. Finished U-bent tubes undergo 100% hydrostatic leak testing and dye penetrant (DP) testing prior to dispatch.
Chemical Composition (per ASTM A179 / ASME SA179)
The chemical composition requirements of ASTM A179 / ASME SA179 are as follows:

Mechanical Properties (per ASTM A179 / ASME SA179)
The mechanical property requirements for ASTM A179 / ASME SA179 tubes are as follows:

Dimensional Tolerances (per ASTM A179 / ASME SA179) Outside Diameter Tolerances

Wall Thickness Tolerances

Available Sizes
The ASTM A179 / ASME SA179 heat exchanger tube is available in a wide range of outside diameters:
12.7 mm, 15.88 mm, 16 mm, 18 mm, 19.05 mm, 20 mm, 22.24 mm, 25 mm, 25.4 mm, 31.75 mm, 35 mm, 38.1 mm, 44.45 mm, 50.8 mm, 57.15 mm, 63.5 mm, 76.2 mm
Wall thicknesses are available in BWG, SWG, and AWG gauges. Custom sizes can be produced upon customer request.
Related Standards and Grades

• ASTM A192 / ASME SA192 – Seamless carbon steel boiler tubes for high-pressure service

• ASTM A210 / ASME SA210 – Seamless medium-carbon steel boiler and superheater tubes

• ASTM A334 / ASME SA334 – Seamless and welded carbon and alloy steel tubes for low-temperature service

Non-Destructive Examination (NDE)
Each tube is subjected to non-destructive examination in accordance with ASTM A179 / ASME SA179 requirements:

• Eddy Current Testing (ET) – For detection of surface and subsurface defects

• Ultrasonic Testing (UT) – For detection of internal discontinuities

• Hardness Testing (HT) – For verification of material condition

• Magnetic Particle Testing (MT) – For surface defect detection in ferromagnetic materials

Additional Testing
In addition to NDE, the following tests are performed to verify tube quality:

• Hydrostatic Test – 100% of tubes are hydrostatically tested to verify leak-tight integrity

• Flattening Test – To assess ductility and soundness of the tube

• Flaring Test – To evaluate resistance to deformation

• Flange Test – To check tube end ductility

Packaging
ASTM A179 / ASME SA179 tubes are vulnerable to damage during transit and require careful handling. Tubes are packed in specially designed steel frames, which are fitted into wooden boxes or cases to ensure protection during transportation. Packaging options include woven bags and plywood cases.
Applications
ASTM A179 / ASME SA179 seamless heat exchanger tubes are widely used across various industries and applications:

• Pressure Vessels – Including cryogenic and high-pressure equipment

• Heat Exchangers – Shell and tube heat exchangers, tubular heat exchangers

• Condensers – Power plant and industrial condensers

• Boilers – Fire-tube and water-tube boilers

• Air Preheaters – Heat recovery systems

• Finned Tubes – Enhanced heat transfer surface applications

• Air Cooler Tubes – Air-cooled heat exchangers

Industrial Sectors

• Refineries and petrochemical plants

• Power generation facilities

• Steel plants and chemical factories

• Fertilizer plants

• Shipbuilding and offshore oil drilling

• Pharmaceutical and specialty chemicals

• Pulp and paper industry

• Gas processing

• Sea water equipment

For a rapid quotation on ASTM A179 / ASME SA179 Heat Exchanger Tube, please provide the following information:

• Quantity (number of pieces or weight)

• Outside diameter and wall thickness

• Tube type (straight, U-bend, coil, or finned)

• Length required (for straight tubes) or bend radius and leg length (for U-bend tubes)

• Surface treatment requirement (if any)

• Delivery period required