YUHONG HOLDING GROUP CO., LTD
| Payment Terms | T/T, L/C at sight |
| Supply Ability | 1000 TONS / month |
| Delivery Time | Depends on order quantity |
| Packaging Details | Steel frame wooden case with plastic cap |
| Alloy Type | Low alloy ferritic steel |
| Form | Seamless tube |
| Processing Method | Cold drawing |
| Applications | Boilers, heat exchangers, superheaters, HRSG |
| Brand Name | YUHONG |
| Model Number | ASTM A213 / ASME SA213 T11 |
| Certification | ISO 9001/TUV/PED |
| Place of Origin | China |
View Detail Information
Explore similar products
ASTM A213 T9 Alloy Steel Seamless U Bend Tube Boiler Tube High Temperature
ASTM A335 P11 Seamless Pipe For Boiler Heat Exchanger For High Temperature Steam
ASME SA334 GR.6 Seamless Tube Low Temperature Carbon Steel Tube
Boiler Membrane Water Wall Panel – High Efficiency Panels
Product Specification
| Payment Terms | T/T, L/C at sight | Supply Ability | 1000 TONS / month |
| Delivery Time | Depends on order quantity | Packaging Details | Steel frame wooden case with plastic cap |
| Alloy Type | Low alloy ferritic steel | Form | Seamless tube |
| Processing Method | Cold drawing | Applications | Boilers, heat exchangers, superheaters, HRSG |
| Brand Name | YUHONG | Model Number | ASTM A213 / ASME SA213 T11 |
| Certification | ISO 9001/TUV/PED | Place of Origin | China |
| High Light | A213 T11 Seamless Boiler Tubes ，13CrMo4-5 Seamless Boiler Tubes ，Power Plant seamless boiler pipes | ||
A213 T11 Alloy Steel Seamless Tube – Introduction
ASTM A213 T11 is a seamless ferritic alloy steel tube designed for high-temperature service in boilers, superheaters, and heat exchangers. It offers excellent thermal strength, oxidation resistance, and creep resistance, making it ideal for pressure-bearing applications in power plants and petrochemical industries. The alloy primarily contains chromium (1–1.5%) and molybdenum (0.44–0.65%), enhancing its performance at elevated temperatures. Supplied in a normalized and tempered condition, A213 T11 tubing meets strict mechanical and chemical requirements for long-term reliability in demanding environments.
Material Overview
· Standard: ASTM A213
· Grade: T11
· Type: Seamless ferritic alloy-steel tube
· Main Alloying Elements: Chromium (1.0–1.5%), Molybdenum (0.44–0.65%)
A213 T11 Equivalent Grades
|
Standard |
Equivalent Grade |
Notes |
|---|---|---|
|
ASME / ASTM |
SA213 T11 |
Identical to A213 T11 (ASME version for pressure vessels) |
|
EN (Europe) |
13CrMo4-5 (1.7335) |
Common in European boilers and pressure vessels |
|
DIN (Germany) |
13CrMo44 |
Older DIN standard; similar to 13CrMo4-5 |
|
BS (UK) |
620B or BS 3059 Part 2 620B |
British standard for high-temperature boiler tubing |
|
JIS (Japan) |
STBA 22 |
Japanese equivalent for heat exchanger/boiler tube |
|
GOST (Russia) |
12Kh1MF |
Russian equivalent; used in pressure vessels |
Chemical Composition (Typical Range)
| Element | Content (%) | Role |
|---|---|---|
| Carbon (C) | ≤ 0.15 | Improves hardness and strength |
| Manganese (Mn) | 0.30 – 0.60 | Enhances strength and hardenability |
| Silicon (Si) | 0.50 – 1.00 | Improves oxidation resistance |
| Chromium (Cr) | 1.00 – 1.50 | Provides corrosion and oxidation resistance |
| Molybdenum (Mo) | 0.44 – 0.65 | Increases creep strength |
| Phosphorus (P) | ≤ 0.025 | Controlled to reduce brittleness |
| Sulfur (S) | ≤ 0.025 | Controlled to improve weldability |
Mechanical Properties (at Room Temperature)
| Property | Typical Value |
|---|---|
| Tensile Strength | ≥ 415 MPa (60 ksi) |
| Yield Strength | ≥ 205 MPa (30 ksi) |
| Elongation | ≥ 30% |
| Hardness | ≤ 163 HB (Brinell) |
Processing Steps
1. Tube Manufacturing
· Method: Seamless
· Processed by hot-extrusion or piercing of a solid billet followed by elongation through a mandrel mill.
Cold-drawn finishing may be used for dimensional precision.
2. Heat Treatment
According to ASTM A213 specification, T11 tubes must be heat-treated as follows:
· Normalized at 850–900°C (1562–1652°F)
(Refines grain structure and improves toughness)
· Tempered at a temperature not less than 650°C (1202°F)
(Relieves internal stresses and restores ductility after normalizing)
Note: Heat treatment must be applied after cold finishing if it's done.
3. Cold Finishing (Optional)
· For tubes requiring tighter dimensional tolerances or smoother finishes.
· May involve:
- Cold drawing
- Straightening
- Sizing
4. Descaling / Surface Treatment
· Descaled via mechanical (shot blasting) or chemical (pickling) methods if required.
5. Testing & Inspection
All tubes undergo mechanical and nondestructive testing per ASTM A213:
· Hardness test
· Flattening test
· Flaring test
· Hydrostatic or nondestructive electric test
· Dimensional check (OD, wall thickness, length)
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
1990
Total Annual:
50M-75M
Employee Number:
50~850
Ecer Certification：
Verified Supplier
.gtr-container-k7p2x9 { font-family: Arial, Helvetica, "Times New Roman", Arial, sans-serif; font-size: 14px; line-height: 1.6; color: #000000; padding: 16px; max-width: 100%; box-sizing: border-box; } .gtr-container-k7p2x9 p { margin-top: 0; margin-bottom: 1em; text-align: lef... .gtr-container-k7p2x9 { font-family: Arial, Helvetica, "Times New Roman", Arial, sans-serif; font-size: 14px; line-height: 1.6; color: #000000; padding: 16px; max-width: 100%; box-sizing: border-box; } .gtr-container-k7p2x9 p { margin-top: 0; margin-bottom: 1em; text-align: lef...
Get in touch with us
Leave a Message, we will call you back quickly!