YUHONG HOLDING GROUP CO., LTD
| Payment Terms | T/T, L/C |
| Supply Ability | TBD |
| Delivery Time | According to the quantity |
| Packaging Details | Plywood case |
| Product | Nozzle |
| Type | Self-Reinforeced Nozzle |
| Material | SA182 F11 |
| Application | Pressure Vessel |
| Brand Name | YUHONG |
| Model Number | SA182 F11 Self-Reinforeced Nozzle |
| Certification | ASME, CCS, ABS, GL, DNV, NK, PED, AD2000, GOST9941-81, ISO 9001-2015 |
| Place of Origin | China |
View Detail Information
Explore similar products
SA105N Self Reinforced Pressure Vessel Nozzle For High Pressure Environment
Stainless Steel Nozzle Neck ASME BPVC Section VIII For High Pressure Equiment
ASME SA105N SRN Carbon Steel Nozzle In Pressure Vessel 273.7MM Diameter
ASME SA105N Self Reinforced Heat Exchanger Nozzle High Accuracy Customized
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | TBD |
| Delivery Time | According to the quantity | Packaging Details | Plywood case |
| Product | Nozzle | Type | Self-Reinforeced Nozzle |
| Material | SA182 F11 | Application | Pressure Vessel |
| Brand Name | YUHONG | Model Number | SA182 F11 Self-Reinforeced Nozzle |
| Certification | ASME, CCS, ABS, GL, DNV, NK, PED, AD2000, GOST9941-81, ISO 9001-2015 | Place of Origin | China |
| High Light | ASME SA182 Self Reinforced Nozzle ，High Temp Pressure Vessel Components ，ASME SA182 pressure vessel nozzle | ||
ASME SA182 F11 Self-Reinforced Nozzle: High-Temp Pressure Vessel Part
ASME SA182 F11 Self-Reinforced Nozzle is a critical high-pressure/high-temperature (HP/HT) component used in boilers, reactors, and power/petrochemical systems. It integrates reinforcement directly into the nozzle forging, eliminating the need for external reinforcement pads. This design enhances structural integrity while simplifying fabrication.
Technical Details
1. Material: SA182 F11 Forged Steel
Composition (Key Elements):
Cr (1.00–1.50%), Mo (0.44–0.65%), C (0.05–0.20%)
Classes: Class 2 (most common), Class 3 (higher strength).
Mechanical Properties (Class 2, min.):
Tensile Strength: 415 MPa (60 ksi)
Yield Strength: 205 MPa (30 ksi)
Hardness: 121–174 HB
Temperature Limits:
Max Service: 595°C (1100°F) for creep resistance.
MDMT: As low as -30°C (-20°F) with proper PWHT & impact testing.
2. Self-Reinforced Design
Principle: Extra thickness at the nozzle-vessel junction provides reinforcement per ASME Sec. VIII Div. 1 (UG-37 to UG-45).
Reinforcement Zone:
Extends d (nozzle ID) or Rn + tn + t from the centerline.
Height: 2.5t or 2.5tn (whichever is smaller).
Advantages:
No external pad → Fewer welds, reduced corrosion risk, smoother flow.
Improved fatigue resistance at the junction.
3. Fabrication & Welding
Critical Steps:
Preheat: 200–300°C (400–600°F) to prevent cracking.
Welding: Use compatible consumables (e.g., E8018-B2).
PWHT Mandatory: 675–760°C (1250–1400°F) for stress relief.
Cooling Rate Control: Avoid temper embrittlement (375–575°C range).
NDT Requirements:
RT (radiographic) for welds + MT/PT (surface cracks) + UT (forgings).
4. Applications
Power plants (boiler drums, steam headers).
Petrochemical reactors & heat exchangers.
High-pressure turbine piping.
Advantages vs. Disadvantages
| Pros | Cons |
|---|---|
| Fewer leak paths | Higher material cost |
| Simplified inspection | Strict PWHT requirements |
| No crevice corrosion (vs. pads) | Risk of temper embrittlement |
| Better fatigue performance | Weight increase |
Key Considerations
Design Compliance: Must satisfy ASME Sec. VIII reinforcement calculations.
Impact Testing: Essential for low-temperature service (UG-84).
Quality Control: Traceability of F11 material certs (mill test reports).
Why Choose This Nozzle?
Ideal for HP/HT corrosive environments (e.g., steam service) where reliability and minimized maintenance are critical. The self-reinforced design excels in cyclic loading applications but demands rigorous fabrication oversight.
For project specifics, always cross-reference ASME BPVC Sec. VIII Div. 1 and applicable piping codes (B31.1/B31.3).
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
1990
Total Annual:
50M-75M
Employee Number:
50~850
Ecer Certification：
Verified Supplier
Yuhong Holding Group equipments production base at Jiangsu Jiangyin City, Jinjiang City and Yancheng City. Total production area around 184000 square meters, main products : Heat Exchanger, Condenser, Pressure Vessel , Fired Heater, Economizer, Columns, Reactor. ... Yuhong Holding Group equipments production base at Jiangsu Jiangyin City, Jinjiang City and Yancheng City. Total production area around 184000 square meters, main products : Heat Exchanger, Condenser, Pressure Vessel , Fired Heater, Economizer, Columns, Reactor. ...
Get in touch with us
Leave a Message, we will call you back quickly!