DongGuan Q1-Test Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Working Days |
| Packaging Details | Plywood Box |
| Cooling Method | Water/Air Cooling |
| Damper Device | Forced Air Damper |
| Pre-heating Time | 40min |
| Ambient Temperature | 5℃～30℃ |
| Control Method | PID+SSR |
| Power supply | AC380V/50Hz/3P |
| Pre-cooling Time | 80min |
| Volume | Internal 80L, 500 ×400× 400mm |
| Brand Name | iqualitrol |
| Model Number | QTS3-80B |
| Certification | |
| Place of Origin |
View Detail Information
Explore similar products
Cold , Heat And Ambient Thermal Shock Test Chamber QTS-80-3 With High Accuracy
Desktop Programmable Temperature Humidity Test Chamber For Computer Components
Temperature And Humidity Environmental Test Chamber With CE ISO SGS Certificatio
High and Low Temperature Humidity Test Chamber with High Accuracy Internal
Product Specification
| Payment Terms | T/T | Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Working Days | Packaging Details | Plywood Box |
| Cooling Method | Water/Air Cooling | Damper Device | Forced Air Damper |
| Pre-heating Time | 40min | Ambient Temperature | 5℃～30℃ |
| Control Method | PID+SSR | Power supply | AC380V/50Hz/3P |
| Pre-cooling Time | 80min | Volume | Internal 80L, 500 ×400× 400mm |
| Brand Name | iqualitrol | Model Number | QTS3-80B |
| Certification | Place of Origin | ||
| High Light | thermal shock chamber ，shock test machine | ||
80L Three Zones Cold Hot Impact Thermal Shock Chamber For Metal And Plastic Testing
Brief Introduction:
Programmable Three Zones Thermal Shock Test Chamber is used to test or composite material structure, in an instant by the extremely high temperature and low temperature under continuous environment can endure degree, in order to test in the shortest possible time chemical changes caused by heat bilges cold shrink or physical damage. Applicable to metal and plastic, rubber, electronic...Such as material, can be used as the basis of its product improvements or reference.
Technical Specifications:
| Structure | Pre-cooling Zone, Pre-heating Zone, Testing Zone (Selectable 2-Zone or 3-Zone Test for stationary object test) |
| Damper Device | Forced Air Damper |
| Interior Material | SUS#304 Stainless Steel |
| Exterior Material | stainless steel with environmentally baking paint |
| Testing Shelves | Stainless Steel Plate |
| Refrigeration | Cascade Refrigeration System |
| Cooling Method | Water/Air Cooling |
| Ambient Temperature | 5℃～30℃ |
| Pre-heating Temperature | 80℃～200℃ |
| Pre-cooling Temperature | －40℃ (－60℃/－75℃)～－10℃ |
| High Temp. Shocking | 60℃～150℃ |
| Low Temp. Shocking |
A=―35℃～0℃ B=―55℃～10℃ C=―65℃～10℃ |
| Temp. Uniformity | Less than ±2℃ |
| Transition time | <10 seconds |
| High Temp. Recovery time | RT℃～150℃/5min |
| Low Temp. Recovery time | RT℃～－75℃/5min |
| Pre-heating Time | 40min (30min for 56L) |
| Pre-cooling Time | 80min (60min for 56L) |
| Controller | Powerful interactive LCD touch screen controller |
| Setting Range |
Temperature: －200℃～300℃ Time: 0H1m～9999H59m Cycle: 1～9999cycle |
| Resolution |
Temperature: 0.01℃ Time: 1min |
| Control Method | PID+SSR |
| Power supply | AC380V/50Hz/3P |
| Accessories |
Viewing Window, Cable Port, Chamber Illumination, LCD touch screen controller, Power cable |
| Security System | Overheat Protector, Compressor overload protector, Controller protector, Motor overload protector |
Notes:
1. Ambient temperature of +23℃ and a cooling water temperature of +25℃
2. During pre-heating, prevention for temperature heat-up may be worked
3. Performance shown above conforms to IEC61300-2-47
4. Temperature heat-up/pull-down time is applicable only during independent chamber operation
QTS3 series air-to-air thermal shock chambers circulate cold, hot, or ambient air as needed. The conditioned air is pre-cooled or pre-heated beyond the set point, allowing quicker recovery of the desired condition after transfer.
QTS3 Features:
1. Automatically setting of pro-cooled and pre-heated air.
2. Testing samples don’t move, cable port is available for power on testing.
3. Powerful interactive touch screen controller, easy operation and setting
4. High accurate temperature recovery with PID auto tuning
5. Auto defrost function
6. All equipment is fully automatic, and all process are precisely controlled with P.L.C.’S.
7. Operation data can be downloaded as needed, or continually, to USB.
8. Controller can set 120 programs and each program can be repeated for max 9999 times.
9. Machine can be shut down automatically in case of electrical power instabilities
Model Selection:
| Model |
Interior dimensions (W ×H × D) |
Interior Volume |
Exterior dimensions (W ×H × D) |
Specimen loading weight |
| QT3-56A/B/C |
400 ×350× 400mm 15.7”×13.8”×15.7” |
56L |
1450× 1950 ×1600mm 57.1” ×76.8” ×63.0” |
2.5Kg |
| QT3-80A/B/C |
500 ×400× 400mm 19.7”×15.7”×15.7” |
80L |
1550× 2050 ×1600mm 61.0” ×80.7” ×63.0” |
5.0Kg |
| QT3-150A/B/C |
600 ×500× 500mm 23.6”×19.7”×19.7” |
150L |
1650× 2150 ×1800mm 64.9” ×84.7” ×70.9” |
7.5Kg |
| QT3-225A/B/C |
750 ×600× 500mm 29.5”×23.6”×19.7” |
225L |
1850× 2250 ×1800mm 72.8” ×88.6” ×70.9” |
7.5Kg |
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2000
Total Annual:
700000-1000000
Employee Number:
50~75
Ecer Certification：
Site Member
DongGuan Q1-Test Equipment Co., Ltd. was founded in year 2000, located in DongGuan, a famous industrial city. Mainly specialized in manufacturing, developing and marketing various environmental testing equipment like programmable temperature and humidity test chamb... DongGuan Q1-Test Equipment Co., Ltd. was founded in year 2000, located in DongGuan, a famous industrial city. Mainly specialized in manufacturing, developing and marketing various environmental testing equipment like programmable temperature and humidity test chamb...
Get in touch with us
Leave a Message, we will call you back quickly!