Adjustable Voltage DJI M30 Drone Tethered System Easy Carrying

Product Specification

DJI M30 Tethered

Product Technical Parameters

1. Tether box (ground end of tether power supply)

(1) Input voltage: 190-240VAC wide range input, single-phase 220VAC, frequency 50/60Hz.

(2) Output voltage: 600-750VDC adjustable, default at the factory is 750VDC.

(3) Output power: rated long-term output of 3500W ± 5%, short-term peak output of 4000W ± 10%.

(4) Wire speed: 0-2m/s, adjustable gear.

(5) Wire tension: 0-10N, adjustable gear.

(6) Safety protection: Designed with strong and weak current separation, it has functions of input undervoltage, input overvoltage, output overvoltage, output overcurrent, output short circuit, and output over temperature protection. The input and output withstand voltage is ≥ 3000VDC, and the insulation layer of the cable withstand voltage is ≥ 3500VDC.

(7) Data Communication: Wired communication function, supports remote display and control, supports client data viewing and downloading.

(8) Data display: The touch screen displays data and status of output voltage, output current, output power, discharge length, operating time, equipment temperature, total power consumption, and fault records.

(9) Setting and adjustment: Supports setting and adjusting parameters such as cable tension and speed, date and time, output voltage, safe meters, alarm temperature, etc., and supports switching between Chinese and English.

(10) Alarm and reminder: When there is a malfunction, the screen displays the fault content and the buzzer sounds strongly to remind.

(11) Automatic cable retraction: synchronized with the takeoff and landing of the drone to retract the cable, adaptive adjustment of tension, and backup power for cable retraction in case of power failure.

(12) Carrying and transportation: The equipment can be carried by hand, equipped with a backpack, and can store system equipment including onboard power supply.

(13) Cable length: 55/110 ± 2m.

(14) Cable diameter and weight: φ 2.3 ± 0.1mm, 10 ± 0.5g/m.

(15) Cable strength: breaking force ≥ 20kg, resistance to repeated retraction times ≥ 500.

(16) Dimensions: Depth 360 x Width 180 x Height 260 ± 0.5mm, excluding foot pads and handles.

(17) Weight: 8.5 ± 0.2kg, excluding mooring cables.

(18) Protection level: IPX4.

2. Onboard power supply (tethered power supply sky end)

(1) Input voltage: 580-810VDC wide range input.

(2) Output voltage: 25.2VDC ± 1%, constant voltage regulation output.

(3) Output power: rated long-term output of 2000W ± 5%, short-term peak output of 2500W ± 10%.

(4) Protection function: Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, and over temperature protection.

(5) Installation method: Replace one drone battery with a tool free plug-in disassembly.

(6) Size: 156 × 75 × 48 ± 0.5mm (replace one drone battery without taking up additional installation space).

(7) Weight: 640 ± 10g (replace a 685g drone battery, non destructively mounted).

(8) Protection level: IP54.

3. Lighting group

(1) Lighting power: rated power 640W ± 5%.

(2) Luminous flux: 80000lm ± 5%.

(3) Installation method: Install the control box slider and the rubber buckle of the lamp group.

(4) Remote control method: Three key remote control wireless control, remote control distance ≥ 150m.

(5) Dimming function: Stepless dimming, smooth adjustment of brightness from 0 to 100%, supports tapping or long pressing.

(6) Lamp weight: 650 ± 10g.

(7) Protection level: IP54.