ESEN HK LIMITED
| Payment Terms | L/C,T/T |
| Supply Ability | 300K/mth |
| Delivery Time | 7~10 working days |
| Packaging Details | Cartons, Capboard, EPE, Blister Tray. |
| Size | 4.3 TFT |
| Brightness | 500 cd/m2 |
| LCM Dimension | 105.5（W）* 67.2（H） * 2.9(T) |
| LCD Active Area | 95.04 * 53.86 |
| Number OfDots | 480 * RGB * 272 |
| LCD Type | a-Si TFT |
| Viewing Direction | ALL |
| Driver IC | ST7283 |
| Interface Type | RGB |
| Operating Temperature | -20℃~ 70℃ |
| Storage Temperature | -30℃~ 80℃ |
| Backlight Type | 10 LEDs |
| Brand Name | ESEN |
| Model Number | T43H4505 |
| Certification | ISO9001/ISO14001 |
| Place of Origin | Shenzhen China |
View Detail Information
Explore similar products
2.4 Inch 240x320 IPS SPI Driver IC ST7789V Transmissive Normally White 400CD
10.1'' 31pin TFT LCD Screen 1280X800 LVDS 8bit Interface For Medical Equipments
HX8238D Driver IC IPS TFT LCD Display Module 3.5'' 320x240 RGB Interface
3.2'' TFT 240x320 RGB MCU SPI LCD Module Wide Temperature 40 PIN Industrial
Product Specification
| Payment Terms | L/C,T/T | Supply Ability | 300K/mth |
| Delivery Time | 7~10 working days | Packaging Details | Cartons, Capboard, EPE, Blister Tray. |
| Size | 4.3 TFT | Brightness | 500 cd/m2 |
| LCM Dimension | 105.5（W）* 67.2（H） * 2.9(T) | LCD Active Area | 95.04 * 53.86 |
| Number OfDots | 480 * RGB * 272 | LCD Type | a-Si TFT |
| Viewing Direction | ALL | Driver IC | ST7283 |
| Interface Type | RGB | Operating Temperature | -20℃~ 70℃ |
| Storage Temperature | -30℃~ 80℃ | Backlight Type | 10 LEDs |
| Brand Name | ESEN | Model Number | T43H4505 |
| Certification | ISO9001/ISO14001 | Place of Origin | Shenzhen China |
| High Light | 480x272 High Brightness TFT Display ，RGB High Brightness TFT Display ，SC7283 4.3 inch tft lcd display | ||
4.3-inch Rgb 480x272 Tft Normal Black Ips Sc7283 High Brightness Tft Display
Module size: 105.5(W)* 67.2(H) * 2.9(T) mm 480 x RGB x 272 Dots Driver: SC7283
4-wire Resistive Touch Screen, WHITE LED backlight, Top view, Wide temperature range, Transmissive polarizer, 500 NITS, RoHS Compliant
The Resistive touch panel senses a touch by measuring where contact is made on the glass. It is independent of temperature and humidity and simple to integrate independent of a separate controller chip.
The Transmissive polarizer is best used for displays that run with the backlight on all the time. This polarizer provides the brightest backlight possible. If you have a need for a bright backlight with lower power drain, transmissive is a good choice for this TFT LCD display.
Suggestions for using LCD modules
1 .The display panel is made of glass and polarizer. As glass is fragile. It tends to become or chipped during handling especially on the edges. Please avoid dropping or jarring. Do not subject it to a mechanical shock by dropping it or impact.
2 .If the display panel is damaged and the liquid crystal substance leaks out, be sure not to get any in your mouth. If the substance contacts your skin or clothes, wash it off using soap and water.
3 .Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary. Do not touch the display with bare hands. This will stain the display area and degraded insulation between terminals (some cosmetics are determined to the polarizer).
4 .The polarizer covering the display surface of the LCD module is soft and easily scratched.Handle this polarizer carefully. Do not touch, push or rub the exposedpolarizers with anything harder than an HB pencil lead (glass, tweezers, etc.). Do not put or attach anything on the display area to avoid leaving marks on it. Condensation on the surface and contact with terminals due to cold will damage, stain or dirty the polarizer. After products are tested at low temperature they must be warmed up in a container before coming in to contact with room temperature air.
5 .If the display surface becomes contaminated, breathe on the surface and gently wipe it with a soft dry cloth. If it is heavily contaminated, moisten cloth with one of the following solvents - Isopropyl alcohol - Ethyl alcohol Do not scrub hard to avoid damaging the display surface.
6 .Solvents other than those above-mentioned may damage the polarizer. Especially, do not use the following.
Company Details
Business Type:
Manufacturer
Year Established:
2010
Total Annual:
25000000-30000000
Employee Number:
280~350
Ecer Certification：
Verified Supplier
Company Overview - Founded: 2010 - Certifications: ISO9001 (Quality) & ISO14001 (Environment) - Industry Focus: Industrial display solutions --- Product Portfolio1. Display Technologies: - Monochrome Displays: TN/STN/FSTN LCM - Advanced Mo... Company Overview - Founded: 2010 - Certifications: ISO9001 (Quality) & ISO14001 (Environment) - Industry Focus: Industrial display solutions --- Product Portfolio1. Display Technologies: - Monochrome Displays: TN/STN/FSTN LCM - Advanced Mo...
Get in touch with us
Leave a Message, we will call you back quickly!