ESEN HK LIMITED
| Payment Terms | T/T,L/C |
| Supply Ability | 300K/mth |
| Delivery Time | 3-4 weeks |
| Packaging Details | All the products are packed in right way |
| Size | 0.91 inch |
| Display Mode | Passive Matrix |
| Display Color | Monochrome (White) |
| Drive Duty | 1/32 Duty |
| Outline Drawing | According to the annexed outline drawing |
| Number of Pixels | 128 x 32 |
| Panel Size | 30.0 x 11.5x 1.2 (mm) |
| Active Area | 22.38 x 5.58 (mm) |
| Pixel Pitch | 0.175 x0.175 (mm) |
| Pixel Size | 0.155 x 0.155 (mm) |
| Driver IC | S S D1306 |
| FP C Numbe | NFP1306-137 |
| Interface | 170cd/m2 |
| FPC Connecting Mode | 14 Pin Soldering FPC |
| Brand Name | ESEN |
| Model Number | TX091PM-12832TSWFG04 |
| Certification | ISO9001/ISO14001 |
| Place of Origin | Shenzhen China |
View Detail Information
Explore similar products
2.9 Inch 128x296 Four Color Epaper Monitor Display Rectangle
4.2'' E Paper Display With 400x300 Pixel For Price Label Display E Book
7.5 Inch 800x480 Wide Temperature IPS TFT LCD Electronic Paper Display
0.77'' 64x128 White Mono OLED Display SPI I2C SSD1312 PMOLED Screen Super Small
Product Specification
| Payment Terms | T/T,L/C | Supply Ability | 300K/mth |
| Delivery Time | 3-4 weeks | Packaging Details | All the products are packed in right way |
| Size | 0.91 inch | Display Mode | Passive Matrix |
| Display Color | Monochrome (White) | Drive Duty | 1/32 Duty |
| Outline Drawing | According to the annexed outline drawing | Number of Pixels | 128 x 32 |
| Panel Size | 30.0 x 11.5x 1.2 (mm) | Active Area | 22.38 x 5.58 (mm) |
| Pixel Pitch | 0.175 x0.175 (mm) | Pixel Size | 0.155 x 0.155 (mm) |
| Driver IC | S S D1306 | FP C Numbe | NFP1306-137 |
| Interface | 170cd/m2 | FPC Connecting Mode | 14 Pin Soldering FPC |
| Brand Name | ESEN | Model Number | TX091PM-12832TSWFG04 |
| Certification | ISO9001/ISO14001 | Place of Origin | Shenzhen China |
| High Light | 128x32 mono oled ，0.91'' mono oled ，14 Pin micro oled display | ||
0.91 inch 128*32 Mono OLED Screen Module CH1115 I2C Interface 14 Pin White Color Monochrome PMOLED Display Panel
TX091PM-2832TSWFG04-H15 Folding Type OEL Display Module Pixel Number: 128 x 32, Monochrome, COG Package
Special Tips:When design main board, Please add Electronic Switch circuit, otherwise, will be caused leak current
Serial Interface Timing Characteristics: (4-wire SPI)
Active Area / Memory Mapping & Pixel Construction
Pin Definition
Functional Specification
1 Commands Refer to the Technical Manual for the SSD1306
2 Power down and Power up Sequence To protect OEL panel and extend the panel life time, the driver IC power up/down routine should include a delay period between high voltage and low voltage power sources during turn on/off. It gives the OEL panel enough time to complete the action of charge and discharge before/after the operation.
2.1 Power up Sequence:
| 1. Power up VDD 2. Send Display off command 3. Initialization 4. Clear Screen 5. Power up VCC/ VBAT 6. Delay 100ms (When VCC is stable) 7. Send Display on command | |
2.2 Power down Sequence:
| 1. Send Display off command 2. Power down VCC / VBAT 3. Delay 100ms (When VCC / VBAT is reach 0 and panel is completely discharges) 4. Power down VDD Note | |
Note 13:
1) Since an ESD protection circuit is connected between VDD and VCC inside the driver IC, VCC becomes lower than VDD whenever VDD is ON and VCC is OFF.
2) VCC / VBAT should be kept float (disable) when it is OFF.
3) Power Pins (VDD, VCC, VBAT) can never be pulled to ground under any circumstance.
4) VDD should not be power down before VCC / VBAT power down.
3. Reset Circuit When RES# input is low, the chip is initialized with the following status:
1. Display is OFF
2. 128x64 Display Mode
3. Normal segment and display data column and row address mapping (SEG0 mapped to column address 00h and COM0 mapped to row address 00h)
4. Shift register data clear in serial interface
5. Display start line is set at display RAM address 0
6. Column address counter is set at 0
7. Normal scan direction of the COM outputs
8. Contrast control register is set at 7Fh
9. Normal display mode (Equivalent to A4h command)
Other Precautions
1) When an OEL display module is operated for a long of time with fixed pattern may remain as an after image or slight contrast deviation may occur. Nonetheless, if the operation is interrupted and left unused for a while, normal state can be restored. Also, there will be no problem in the reliability of the module.
2) To protect OEL display modules from performance drops by static electricity rapture, etc., do not touch the following sections whenever possible while handling the OEL display modules.
* Pins and electrodes
* Pattern layouts such as the FPC
3) With this OEL display module, the OEL driver is being exposed. Generally speaking, semiconductor elements change their characteristics when light is radiated according to the principle of the solar battery. Consequently, if this OEL driver is exposed to light, malfunctioning may occur.
* Design the product and installation method so that the OEL driver may be shielded from light in actual usage.
* Design the product and installation method so that the OEL driver may be shielded from light during the inspection processes.
4) Although this OEL display module stores the operation state data by the commands and the
Q&A
Q: What about payment terms?
A: PayPal and credit card can be accepted for sample, T/T paid for mass order. Advance payment percentage can be discussed.
Q: How long can I get the goods?
A: It depends on the quantity. Our inventory is mainly raw materials, semi-finished and a small number of finished products. Samples available in stock will be sent in 3 days; Small batch delivery takes 15-20 working days include producing; Large batch delivery takes 20-30 working days. We will list the time cost for you before order.
Q: Can I trust the quality? We want good quality first.
A: Our company has a professional Quality Control Department, and all products are 100% inspected prior to ship. We welcome all the customers from the wolrd visiting our factory for checking any time
Company Details
Business Type:
Manufacturer
Year Established:
2010
Total Annual:
25000000-30000000
Employee Number:
280~350
Ecer Certification：
Verified Supplier
Established in 2010, ESEN has devoted itself to the manufacturing and development of high-quality products for the Industrial LCD Displays including monochrome TN/STN/FSTN LCM, COG LCD, VATN-LCD, TFT LCD, OLED display modules and System Integrated Solutions. ESEN has become the leading industrial di... Established in 2010, ESEN has devoted itself to the manufacturing and development of high-quality products for the Industrial LCD Displays including monochrome TN/STN/FSTN LCM, COG LCD, VATN-LCD, TFT LCD, OLED display modules and System Integrated Solutions. ESEN has become the leading industrial di...
Get in touch with us
Leave a Message, we will call you back quickly!