ESEN HK LIMITED
| Payment Terms | T/T,L/C |
| Supply Ability | 300K/mth |
| Delivery Time | 3-4 weeks |
| Packaging Details | All the products are packed in right way |
| Size | 0.96 inch |
| Display Color | White / Yellow |
| Drive Duty | 1/64 Duty |
| Outline Drawing: | According to the annexed outline drawing |
| Number of Pixels | 128x64 |
| Panel Size | 26.7 x 19.26 x 1.45(mm) |
| Active Area | 21.74 x 11.175(mm) |
| Pixel Pitch | 0.17 x0.175(mm) |
| Pixel Size | 0.15x 0.15 (mm) |
| Structure | CoG |
| IC | SSD1315 |
| 3V Power supply | 1/64 duty |
| Interface | SPl, 12C |
| Brand Name | ESEN |
| Model Number | HP096-2864KLBAG01-H30 |
| Certification | ISO9001/ISO14001 |
| Place of Origin | Shenzhen China |
View Detail Information
Explore similar products
0.91 inch 128x32 Monochrome OLED Display Module Manufacturer Support interface
2.9 Inch 128x296 Four Color Epaper Monitor Display Rectangle
4.2'' E Paper Display With 400x300 Pixel For Price Label Display E Book
7.5 Inch 800x480 Wide Temperature IPS TFT LCD Electronic Paper Display
Product Specification
| Payment Terms | T/T,L/C | Supply Ability | 300K/mth |
| Delivery Time | 3-4 weeks | Packaging Details | All the products are packed in right way |
| Size | 0.96 inch | Display Color | White / Yellow |
| Drive Duty | 1/64 Duty | Outline Drawing: | According to the annexed outline drawing |
| Number of Pixels | 128x64 | Panel Size | 26.7 x 19.26 x 1.45(mm) |
| Active Area | 21.74 x 11.175(mm) | Pixel Pitch | 0.17 x0.175(mm) |
| Pixel Size | 0.15x 0.15 (mm) | Structure | CoG |
| IC | SSD1315 | 3V Power supply | 1/64 duty |
| Interface | SPl, 12C | Brand Name | ESEN |
| Model Number | HP096-2864KLBAG01-H30 | Certification | ISO9001/ISO14001 |
| Place of Origin | Shenzhen China |
HP096-2864KLBAG01-H30 is a 128x64 resolution COG graphic OLED display module, diagonal size 0.96 inch. The model is designed as consumer grade which is having the advantage of competitive price. The module is built-in with SSD1315 IC; it supports I2C and 3-wire /4-wire SPI serial interface. The supply voltage for logic is 3V, supply voltage for display is 7.5V, display with 50% check board current is 6mA @ 7.5Vcc (typical value), driving duty 1/64.HP096-2864KLBAG01-H30 module supports internal Charge Pump supply and external VCC supply.
This 0.96 inch COG Graphic OLED module is suitable for wearable device, smart home applications and etc. This module can be operating at temperatures from -30℃ to +70℃; its storage temperatures range from -30℃ to +70℃.
| Parameter | Symbol | Min | Max | Unit |
|---|---|---|---|---|
| Supply Voltage for Logic | VDD | -0.3 | 4.0 | V |
| Charge Pump Regulator | VBAT | -0.3 | 6.0 | V |
| Supply Voltage for Display | VCC | 0 | 18.0 | V |
| Operating Temperature | TOP | -30 | +70 | °C |
| Storage Temperature | TSTG | -30 | +70 | °C |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage for Logic | VDD | － | 2.8 | 3.0 | 3.3 | V |
| Supply Voltage for Display | VCC | － | 7.0 | 7.5 | 8.0 | V |
| Input High Volt. | VIH | － | 0.8×VDD | － | VDD | V |
| Input Low Volt. | VIL | － | 0 | － | 0.2×VDD | V |
| Output High Volt. | VOH | － | 0.9×VDD | － | VDD | V |
| Output Low Volt. | VOL | － | 0 | － | 0.1×VDD | V |
| Operating Current for VCC (50% display ON) | ICC | － | － | 6 | 12 | mA |
| No. | Symbol | Function | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | C2N | C2P/C2N – Pin for charge pump capacitor; Connect to each other with a capacitor. | ||||||||
| 2 | C2P | |||||||||
| 3 | C1P | C1P/C1N – Pin for charge pump capacitor; Connect to each other with a capacitor. | ||||||||
| 4 | C1N | |||||||||
| 5 | VBAT | Power Supply for DC/DC Converter Circuit This is the power supply pin for the internal buffer of the DC/DC voltage converter. It must be connected to external source when the converter is used. It should be float when the converter is not used. | ||||||||
| 6 | VCC | Power supply for panel driving voltage. This is also the most positive power voltage supply pin. When charge pump is enabled, a capacitor should be connected between this pin and VSS. | ||||||||
| 7 | VSS | Ground of Logic Circuit This is a ground pin. It acts as a reference for the logic pins. It must be connected to external ground. | ||||||||
| 8 | VDD | Power Supply for Logic This is a voltage supply pin. It must be connected to external source. | ||||||||
| 9 | BS0 | Communicating Protocol Select These pins are MCU interface selection input. See the following table:
| ||||||||
| 10 | BS1 | |||||||||
| 11 | CS# | Chip Select This pin is the chip select input. The chip is enabled for MCU communication only when CS# is pulled low. | ||||||||
| 12 | RES# | Power Reset for Controller and Driver This pin is reset signal input. When the pin is low, initialization of the chip is executed. | ||||||||
| 13 | D/C# | In I2C mode, this pin acts as SA0 for slave address selection. When 3-wire serial interface is selected, this pin must be connected to VSS. | ||||||||
| 14~16 | D0~D2 | When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN. When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL. | ||||||||
| 17 | IREF | Current Reference for Brightness Adjustment This pin is segment current reference pin. A resistor should be connected between this pin and VSS. Set the current lower than 30uA. | ||||||||
| 18 | VCOMH | COM signal deselected voltage level. A capacitor should be connected between this pin and VSS. | ||||||||
| 19 | VCC | Power supply for panel driving voltage. This is also the most positive power voltage supply pin. When charge pump is enabled, a capacitor should be connected between this pin and VSS. | ||||||||
| 20 | VLSS | Ground of Analog Circuit This is an analog ground pin. It should be connected to VSS externally. |
Q: Is there a Touch Panel (Touch Screen) on the display?
A: We can offer you the RTP (Resistive Touch Panel) and CTP (Capacitive Touch Panel) if you need.
Q: What about payment terms?
A: PayPal and credit card can be accepted for sample, T/T paid for mass order. Advance payment percentage can be discussed.
Q: How long can I get the goods?
A: It depends on the quantity. Our inventory is mainly raw materials, semi-finished and a small number of finished products. Samples available in stock will be sent in 3 days; Small batch delivery takes 15-20 working days include producing; Large batch delivery takes 20-30 working days. We will list the time cost for you before order.
Q: Can I trust the quality? We want good quality first.
A: Our company has a professional Quality Control Department, and all products are 100% inspected prior to ship. We welcome all the customers from the wolrd visiting our factory for checking any time
Company Details
Business Type:
Manufacturer
Year Established:
2010
Total Annual:
25000000-30000000
Employee Number:
280~350
Ecer Certification：
Verified Supplier
Company Overview - Founded: 2010 - Certifications: ISO9001 (Quality) & ISO14001 (Environment) - Industry Focus: Industrial display solutions --- Product Portfolio1. Display Technologies: - Monochrome Displays: TN/STN/FSTN LCM - Advanced Mo... Company Overview - Founded: 2010 - Certifications: ISO9001 (Quality) & ISO14001 (Environment) - Industry Focus: Industrial display solutions --- Product Portfolio1. Display Technologies: - Monochrome Displays: TN/STN/FSTN LCM - Advanced Mo...
Get in touch with us
Leave a Message, we will call you back quickly!