Dongguan Ampfort Electronics Co., Ltd.
| Payment Terms | T/T, Western Union |
| Supply Ability | 100KKPCS Per month |
| Delivery Time | 3-4 weeks |
| Packaging Details | Bulk |
| Name | Ceramic PTC Thermistor |
| Voltage - Max | 1.0KV |
| Resistance - 25°C (Typ) | 1.1kohm |
| Mounting Type | Through Hole |
| Package / Case | Radial, Disc |
| Lead Spacing | 5+/-1mm |
| Product Marking | SCD 102R |
| Switching Temp. | 80±10℃ |
| Rated Current | 10mA(25±2℃) |
| Switching Current | 30mA(25±2℃) |
| Brand Name | AMPFORT |
| Model Number | MZ21-08D112M-102 |
| Certification | ROHS |
| Place of Origin | Dongguan,Guangdong,China |
View Detail Information
Explore similar products
MZ31 16P Positive Temperature Coefficient Thermistor 18MM PTC Thermistor
MZ9 Surface Mount Heater Pellet 420V PTC Thermistor 3.5K Aluminum Heating
Electronic Ballast MZ5 105C PTC Thermistor 300R PTC Positive Temperature
Glass Sealed KTY84 580OHM PTC Thermistor Positive Temperature Coefficient Sensor
Product Specification
| Payment Terms | T/T, Western Union | Supply Ability | 100KKPCS Per month |
| Delivery Time | 3-4 weeks | Packaging Details | Bulk |
| Name | Ceramic PTC Thermistor | Voltage - Max | 1.0KV |
| Resistance - 25°C (Typ) | 1.1kohm | Mounting Type | Through Hole |
| Package / Case | Radial, Disc | Lead Spacing | 5+/-1mm |
| Product Marking | SCD 102R | Switching Temp. | 80±10℃ |
| Rated Current | 10mA(25±2℃) | Switching Current | 30mA(25±2℃) |
| Brand Name | AMPFORT | Model Number | MZ21-08D112M-102 |
| Certification | ROHS | Place of Origin | Dongguan,Guangdong,China |
| High Light | 1000V Ceramic PTC Thermistor ，Current Limiting Ceramic PTC Thermistor ，Cross Resettable PTC Thermistor | ||
Ceramic PTC Thermistor YS4020 Cross Resettable Fuse 1000V 1100 Ohm 20% Tol For Current Limiting
DESCRIPTION Of The Ceramic PTC Thermistor
PTC THERMISTOR INTENDED FOR USE AS A CURRENT LIMITING PROTECTION DEVICE
Outline size Of The Ceramic PTC Thermistor
| Model Number | MZ21-08D112M-102 |
| Dmax(mm) | 9.0 |
| Tmax(mm) | 6.5 |
| W (mm) | 5±1 |
| d(mm) | 0.6±0.05 |
| L1min(mm) | 10 |
| Hmax (mm) | 13.5 |
| Part Number | MZ21-08D112M-102 |
| Product Marking | SCD 102R |
| Coating Material and Color | Green,Silicone Resin |
| Lead | Tin – plated copper wire / Short lead / Side-bend |
Electrical Characteristics (Ta =25℃) Of The Ceramic PTC Thermistor
| Part Number | MZ21-08D112M-102 |
| Rated Resistance Rn (Ω) | 1100±20% |
| Switching Temp. Tc(℃) | 80±10 |
| Withstand voltage Up(V) | ≥1000 |
| Rated Current In(mA) | 10(25±2℃) |
| Switching Current It(mA) | 30(25±2℃) |
| Residual Current Ir(mA) | ≤2 |
| Voltage Surge V(V) | 1000 |
Test item and conditions Of The Ceramic PTC Thermistor
| NO | Test Item | Test Condition | Requirements |
| 1 | Appearance Overall Dimension Rated zero power resistance | No visual damage,Pin no oxidation, no broken;Mark shall be complete, clear and identifiable. Measure by vernier caliper. Room Temperature:25±2℃；Place period:≥30min | Fig.1
Table 1 Table 2 |
| 2 | Switching Temperture | Curie temperature is corresponding value at 2 times of R25 R-T curve. | Table 2 |
| 3 | Withstand voltage | At 25±2℃ ambient environment,voltage 220V,last for 3S ；suddenly changed to 1000V, last 30S then cut off power . | 1000 Visual appearance no visible damage |
| 4 | Non-Operating Current | Place in 25±2℃ still air for 30min, power voltage:220VAC,applying with 30mA current,last 1h ,test its resistance change ratio(Test voltage between two PTC lead with voltmeter ,test PTC current with amperemeter ,then can get resistance of PTC). | 10mA(25±2℃) ┃ Resistance change rate ┃≤50% Inaction for 1 hour |
| 5 | Action Current
| After placed in 25±2℃ still air for 30min , power voltage:220VAC,applying with 60Ma current, should go into high-impedance-state in 5 mins. | 30mA Action time ≤5min |
| 6 | Residual current | At 25±2℃ ambient environment,adjust voltage withstand tester to 1000V gradually , steady 10s get reading -current go through PTC,it is residual curent. | ≤2mA |
| 7 | Solderability | Use method of slotted weld ,stain with scaling powder , dip into 230±5℃ lead free tin(Sn96.5Ag3Cu0.5)molten solder groove along the axis direction, last for 3S~5S,body is 5mm far away with molten solder , take out and observe. | The terminals shall be uniformly tinned, and its area≥95% |
| 8 | Resistance to soldering Heat | Use method of slotted weld ,stain with scaling powder , dip into 260±5℃ lead free tin(Sn96.5Ag3Cu0.5)molten solder groove along the axis direction ,last for 3±1S,body is 2mm far away with molten solder,after place in room temperature for 24hours,check appearance and test zero power resistance then compare with initial resistance. | No visible mechanical damage. ┃Resistance change rate┃≤ 20% |
| 9 | High temperature discontinuous load | According to GB7153 1081th experiment,temp 60±2℃,voltage 265V,initial current 400mA,power on 90min,outage 30min,after total load 1000 hours , place in room temperature for 24hours,check appearance and test zero power resistance then compare with initial resistance. | No visible mechanical damage. ┃Resistance change rate┃≤ 30% |
| 10 | Strength of lead terminal | Do experiment according to GB2423-29 test U , test Ua, tension 10N and keep 10s ; test Ub , bend 90°,tension 5N,consecutive 2 times ;test Uc , turn around 180° ,consecutive 2 times ; Place in room temperature for 24 hours,test zero power resistance and compare with initial resistance. | ┃Resistance change rate┃≤ 20% |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter
Year Established:
2014
Total Annual:
1850000-2340000
Employee Number:
51~200
Ecer Certification：
Verified Supplier
Dongguan Ampfort Electronics Co., Ltd. is a high-tech enterprise specializing in R&D, manufacturing and sales, committed to becoming a comprehensive supplier of circuit protection components. We introduced advanced quality system,management systems and high-precision automation equipm... Dongguan Ampfort Electronics Co., Ltd. is a high-tech enterprise specializing in R&D, manufacturing and sales, committed to becoming a comprehensive supplier of circuit protection components. We introduced advanced quality system,management systems and high-precision automation equipm...
Get in touch with us
Leave a Message, we will call you back quickly!