Cangzhou Huachen Roll Forming Machinery Co., Ltd.
| Roller Material | 45# Steel |
| Production Capacity | 15-20m/min |
| Machine Frame | 350 H Beam |
| Packaging Details | 40GP Container |
| Delivery Time | 30days |
| Motor Power | 4+4KW |
| Decoiler Type | Hydraulic/manual Decoile |
| Machine Type | Roll Forming Machine |
| Supply Ability | 60 Sets Per Month |
| Panel Thickness | 0.3-0.6mm |
| Payment Terms | L/C,T/T |
| Cutting Method | Hydraulic Cutting |
| Brand Name | HC |
| Certification | CE |
| Place of Origin | China |
| Model Number | 38-235-940-1220 |
View Detail Information
Explore similar products
20 Roller Station Control System PLC Control Cold Steel Roll Forming Machine For
Multi function Steel wall panel roll forming machine with special cutter
High Speed Automatic Roof Panel Roll Forming Machine With PLC Control
Blue High Speed Roof Panel Roll Forming Machine / Roll Former
Product Specification
| Roller Material | 45# Steel | Production Capacity | 15-20m/min |
| Machine Frame | 350 H Beam | Packaging Details | 40GP Container |
| Delivery Time | 30days | Motor Power | 4+4KW |
| Decoiler Type | Hydraulic/manual Decoile | Machine Type | Roll Forming Machine |
| Supply Ability | 60 Sets Per Month | Panel Thickness | 0.3-0.6mm |
| Payment Terms | L/C,T/T | Cutting Method | Hydraulic Cutting |
| Brand Name | HC | Certification | CE |
| Place of Origin | China | Model Number | 38-235-940-1220 |
Main Technical Parameters
|
Roller Stations |
18Stations |
|
Roller & Shaft Material |
45# Steel Quenching and Plating |
|
Diameter of Shaft |
Φ70mm |
|
Cutter Material |
CR12 |
|
Drive Type |
Chain Drive |
|
Speed |
15-20m/min |
|
Total Power |
4+4KW |
|
Voltage |
380V 50Hz3Phases |
The machine uses 18 roller stations to carry out the forming process in successive stages. Instead of shaping the roofing material in a single operation, the sheet passes through the roller section progressively to develop the required profile.
The number of forming stations is therefore one of the key specifications to check when matching a roll forming machine with a particular color steel tile design.
The forming components use 45# steel for both rollers and shafts. The specified material treatment includes quenching and plating.
A Φ70 mm shaft diameter is provided for the forming system. These details give buyers specific mechanical parameters to consider when reviewing the construction and configuration of the equipment.
The machine has a specified forming speed of 15–20 m/min.
For production planning, this figure can be used as a reference for the machine's forming speed. The actual operating result should be evaluated in relation to the roofing profile, raw material, and other production conditions.
The machine combines a CR12 cutter with a chain drive transmission system.
The cutter material and drive method are separate elements of the equipment configuration. When comparing different color steel tile roll forming machines, these specifications can be reviewed together with the roller station count and shaft dimensions.
The machine is specified with 4+4 kW total power and a 380 V / 50 Hz / 3-Phase electrical configuration.
The power supply should be checked against the electrical conditions at the intended installation location before the machine is put into operation.
This equipment is intended for color steel tile and metal roofing profile forming. Its continuous roll forming configuration can be used in roofing material production where the required profile corresponds with the machine's forming setup.
Common application categories include:
When selecting an 18-Station Color Steel Tile Roll Forming Machine, buyers should first confirm the required finished profile and then review the machine's technical configuration.
Key points include the 18-station forming section, 45# steel roller and shaft material, Φ70 mm shaft diameter, CR12 cutter, chain drive, 15–20 m/min forming speed, 4+4 kW power, and 380 V / 50 Hz / 3-Phase electrical supply.
Confirming these specifications in advance helps ensure that the selected equipment corresponds to the intended roofing profile and production setup.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2013
Total Annual:
2000000-4000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Our factory was originally established in 1998 as a small factory located on North Street, Botou City Station. With the increase in international export business and the expansion of the site, in 2014, we established Cangzhou Huachen Roll Forming Machinery Co., Ltd. Cangzhou Huachen Roll Form... Our factory was originally established in 1998 as a small factory located on North Street, Botou City Station. With the increase in international export business and the expansion of the site, in 2014, we established Cangzhou Huachen Roll Forming Machinery Co., Ltd. Cangzhou Huachen Roll Form...
Get in touch with us
Leave a Message, we will call you back quickly!