Cangzhou Huachen Roll Forming Machinery Co., Ltd.
| Production speed | 15-20m/min |
| Delivery Time | 30days |
| Payment Terms | L/C,T/T |
| Machine Frame | 350 H Beam |
| Motor Power | 4+4KW |
| Decoiler Type | Hydraulic/manual Decoiler |
| Condition | New |
| Machine Type | Roll Forming Machine |
| Packaging Details | 40GP Container |
| Roller Materia | 45# Steel |
| Cutting Method | Hydraulic Cutting |
| Supply Ability | 60 Sets Per Month |
| Panel Thicknes | 0.3-0.6mm |
| Brand Name | HC |
| Place of Origin | China |
| Certification | CE |
| Model Number | 28-240-1002-1220 |
View Detail Information
Explore similar products
20 Roller Station Control System PLC Control Cold Steel Roll Forming Machine For
Multi function Steel wall panel roll forming machine with special cutter
High Speed Automatic Roof Panel Roll Forming Machine With PLC Control
Blue High Speed Roof Panel Roll Forming Machine / Roll Former
Product Specification
| Production speed | 15-20m/min | Delivery Time | 30days |
| Payment Terms | L/C,T/T | Machine Frame | 350 H Beam |
| Motor Power | 4+4KW | Decoiler Type | Hydraulic/manual Decoiler |
| Condition | New | Machine Type | Roll Forming Machine |
| Packaging Details | 40GP Container | Roller Materia | 45# Steel |
| Cutting Method | Hydraulic Cutting | Supply Ability | 60 Sets Per Month |
| Panel Thicknes | 0.3-0.6mm | Brand Name | HC |
| Place of Origin | China | Certification | CE |
| Model Number | 28-240-1002-1220 |
Main Technical Parameters
|
Roller Stations |
12Stations |
|
Roller & Shaft Material |
45# Steel Quenching and Plating |
|
Shaft Diameter |
Φ70mm |
|
Cutter Material |
CR12 |
|
Drive System |
Chain Drive |
|
Forming Speed |
15-20m/min |
|
Total Power |
4+4KW |
|
Voltage |
380V 50Hz3Phases |
Product Overview
The 12-Station Color Steel Tile Roll Forming Machine is configured for the continuous forming of color steel roofing tile profiles. Its forming section consists of 12 roller stations, with the sheet progressively shaped as it moves through the forming process.
The machine is built around a 12-station roller forming section. The steel sheet moves through the roller stations in sequence, with each stage contributing to the progressive formation of the roofing profile.
When selecting a roll forming machine, the station quantity should be considered together with the required finished profile and material specifications.
Both the rollers and shafts are specified as 45# steel and include quenching and plating treatment.
The shaft diameter is Φ70 mm. These are specific mechanical parameters that buyers can use when reviewing the construction and configuration of the forming system.
The machine uses chain drive for power transmission.
The cutting section is equipped with a CR12 cutter. The drive type and cutter material form part of the machine's overall configuration and can be reviewed alongside the forming station quantity and shaft specifications.
The specified forming speed is 15–20 m/min.
This figure provides a measurable reference for production planning and equipment comparison. Actual operating conditions may vary according to the roofing profile, raw material, and production setup.
The machine has a total power specification of 4+4 kW.
Its electrical requirement is 380 V / 50 Hz / 3-Phase. The available power supply at the installation site should be checked before commissioning to ensure compatibility with the machine specification.
The 12-Station Color Steel Tile Roll Forming Machine is intended for continuous forming of color steel roofing tile profiles.
Typical application areas include:
The machine configuration should be matched to the required finished profile before ordering.
For buyers evaluating a Color Steel Tile Roll Forming Machine, the main parameters of this configuration include 12 roller stations, 45# steel rollers and shafts, quenching and plating treatment, and a Φ70 mm shaft.
The machine also incorporates a CR12 cutter and chain drive, with a specified forming speed of 15–20 m/min. For electrical planning, the stated configuration is 4+4 kW total power with 380 V / 50 Hz / 3-Phase power supply.
These specifications can be used as a technical reference when comparing the machine with the requirements of a specific color steel roofing production project.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2013
Total Annual:
2000000-4000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Our factory was originally established in 1998 as a small factory located on North Street, Botou City Station. With the increase in international export business and the expansion of the site, in 2014, we established Cangzhou Huachen Roll Forming Machinery Co., Ltd. Cangzhou Huachen Roll Form... Our factory was originally established in 1998 as a small factory located on North Street, Botou City Station. With the increase in international export business and the expansion of the site, in 2014, we established Cangzhou Huachen Roll Forming Machinery Co., Ltd. Cangzhou Huachen Roll Form...
Get in touch with us
Leave a Message, we will call you back quickly!