PE600x900 Stone Crusher 100t/h Jaw Crusher Machine For Stone Rock

Product Specification

Top Sale PE600x900 Stone Crusher 100t/h Jaw Crusher Machine For The Stone Rock

Introduction:

Jaw crusher is the most widely used crusher in the world at present. It has the advantages of large crushing ratio, uniform product particle size, simple structure and convenient maintenance. It can be divided into coarse crushing and fine crushing. The maximum compressive strength of the crushed material is 320MPa. Among them, large and medium-sized jaw crusher is one of the fist products of our company, especially in the design and production of large jaw crushers, which has been in the leading level in China.

Paramenter:

Working Principle:

The motor drives the belt and pulley to make the movable jaw move up and down through the eccentric shaft. When the movable jaw rises, the included angle between the elbow plate and the movable jaw becomes larger, so as to push the movable jaw plate to approach the fixed jaw plate. At the same time, the materials are crushed or split to achieve the purpose of crushing; When the movable jaw descends, the included angle between the elbow plate and the movable jaw becomes smaller, and the movable jaw plate leaves the fixed jaw plate under the action of the pull rod and spring. At this time, the crushed materials are discharged from the lower opening of the crushing chamber. With the continuous rotation of the motor, the crusher jaw makes periodic movement to crush and discharge materials, so as to realize mass production.

Features:

1. The crushing cavity is deep and has no dead zone, which improves the feeding capacity and output;

2. Its crushing ratio is large and the product particle size is uniform;

3. The gasket type discharge port adjustment device is reliable and convenient, with a large adjustment range, which increases the flexibility of the equipment;

4. Lubrication system, easy to replace components and small maintenance workload;

5. Simple structure, reliable operation and low operation cost;

6. Energy saving of equipment: energy saving of single machine is 30%~40%, and energy saving of system is more than twice;

7. The discharge port has a large adjustment range, which can meet the needs of different users;

8. Low noise and less dust.

Application:

It is applicable to various ores and rocks with crushing compressive strength not exceeding 320Mpa, and is applied to mining, metallurgy, road and bridge, building materials, water conservancy, chemical industry and other industries.

Customer:

Our machinery have been widely used in various industries, including mining,recycling,construction material and cement manufacture, chemical industry, electricity, metallurgy, mine, etc., enjoying a good reputation among customers both in the overseas and domestic market. TONTEN Machinery Limited Strictly control the mass production quality and lead time , and let the business goes smoothly !Our Customer Concept: Create Value for Customers is the only Reason for Our Existence.

Company Profile:

TONTEN MACHINERY LIMITED is a professional manufacturer and exporter that is concerned with the design, development and production of Abrasives, Refractory Material, Wear Resistance Material, Chemical Products. We are located in Gongyi City, Henan Province, China, with convenient transportation access. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Covering an area of 3500 square meters, we now have over 30 workers, an annual sales figure that exceeds US$5 Million - US$10 million and are currently exporting 70% of our production worldwide.
Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction. As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching Europe, the Americas, Asia,Africa and Australia.