Rotary Arm Heavy Duty PET Film Pallet Wrapper

Product Specification

TL2000FZ-P Rotary arm heavy-duty pallet wrapping machine

pallet wrapping machine , Fully automatic pallet wrapping machine wrapper , heavy-duty pallet wrapping machine

Technical agreement

1, Project overview

1. Packaging process

1.1 the whole stack of goods enters into the winding position conveyor, turns on the winding mode, and twines the packaging around. After the packaging parameters are set, the film is automatically loaded and broken, and is automatically transported to the subsequent conveying line;

1.2 the equipment can load film automatically, break film automatically after packaging, and weld film tail automatically.

2. Packaging materials

2.1 packaging materials:

DPE film drawing machine

Film width: 500mm

Thickness: 17-35 μ M

Maximum outer diameter: 260mm

Inner hole of paper core: 76mm

Paper core length: 500mm

Technical parameters of supplied products

Technical parameters of dr2000fz-pl automatic rocker arm online winding packaging machine

1. Wrapping object

Package specification: 1200mm * 1200mm

Overall package height: 1800mm weight: 1000kg

2. Machine parameters

Packing efficiency: 30 / hour

Elevation of conveying surface: 600mm

Rocker arm speed: 20rpm

Power: ～ 3kw

Weight: 2500kg

Working voltage: 380VAC / 3-phase 5-wire / 50 Hz

Air consumption: 1000ml / min

Pneumatic working pressure: 0.4 ~ 0.6MPa

4, Scope of supply of all parts of rocker arm machine

1. Rocker arm drive parts (1 set)

Motor frequency control and braking.

Rocker reducer

Power: P = 1.1kw

Rocker drive frequency conversion speed regulation, with brake

2. Lifting parts of membrane rack (1 set)

The lifting of membrane frame adopts chain drive, which is stable and reliable.

Model of film rack lifting drive reducer: turbine worm gear reducer

Motor power 0.37kw

Film rack lifting deceleration motor

3. Frame parts (1 set)

The frame is a gantry type four column square tube steel structure, and the material is Q235 profile.

The upper part of the frame is equipped with a transmission bracket.

The rocker arm component is fixed on the rocker arm frame through the slewing bearing.

4. Membrane rack components (1 set)

Photoelectric switch is installed on the membrane rack to automatically detect the height of goods.

AC motor power: 0.37kw

Film output motor of membrane rack

The tensile ratio of the scaffold is 1:2.5

Film feeding speed adjustable by frequency conversion

Follow up mechanism of membrane support

5. Automatic film breaking mechanism

After winding, the film welding is cut off automatically and the film head is clamped.

Special film clamp device and film breaking program control, and set up film blowing device to ensure no film tail after winding.

The fusing film is heated and fused automatically after welding to ensure no film tail and the highest efficiency of automatic film breaking.

The unique film breaking mechanism greatly improves the packaging efficiency of the equipment and ensures that it matches the palletizing efficiency of customers.

All pneumatic components are made of Adec.

6. Pneumatic control system of rocker winding machine

Gas source requirements: instrument gas shall be connected by the buyer to the stop valve inlet outside the pneumatic control box.

A control box controls the cylinder drive.

7. Electrical and control system:

Programmable control;

Touch screen operation, winding layer number and times can be set;

Photoelectric switch can automatically sense the height of goods;

Slewing bearing drive, accurate positioning;

Digital parameter setting: cantilever speed, film rack lifting speed, film stand film output speed.

The machine is equipped with automatic, manual, side set conversion functions, which better ensure the operation of the packaging system.

The machine is equipped with warning lights

** Main feature: