Product Specification

4mm AISI 304 EPQ Stainless Steel Wire for Wire Forming

TOPONE 4mm AISI 304 Stainless Steel EPQ Wire is designed for wire forming and stainless steel components that require a suitable combination of material grade, surface condition, diameter, and forming performance.

The standard product size is 4 mm, while the available stainless steel wire diameter range is 0.15–12 mm according to production requirements.

AISI 304 is widely used for stainless steel wire products in kitchen equipment, wire racks, mesh, hardware, and industrial components. EPQ wire can be selected for applications where the wire will be further formed into specific shapes or components.

For accurate material selection, buyers should consider the stainless steel grade, diameter, surface condition, mechanical condition, dimensional tolerance, forming method, and final application together.

Product Specifications

Note: Tensile strength, elongation, diameter tolerance, surface condition, and mechanical condition should be confirmed according to the selected diameter, production specification, and application.

What Is 304 EPQ Stainless Steel Wire?

304 EPQ stainless steel wire is designed for applications where stainless steel wire needs to be processed into formed components.

The material grade, wire diameter, mechanical condition, and surface condition all influence the behavior of the wire during forming.

For this reason, EPQ wire should be specified according to the actual forming process rather than simply selecting the material grade.

4mm AISI 304 Stainless Steel Wire

The standard size for this product is 4 mm AISI 304 stainless steel EPQ wire.

A 4 mm wire can be considered for medium-size formed-wire components, racks, baskets, brackets, frames, and other industrial products.

The final suitability depends on the component design, forming method, required dimensional tolerance, and mechanical condition.

0.15–12 mm Diameter Range

TOPONE stainless steel wire is available in diameters from 0.15 mm to 12 mm.

This range covers fine wire and larger wire-forming requirements.

For OEM or industrial orders, buyers should specify:

• Wire diameter

• Diameter tolerance

• Stainless steel grade

• Surface condition

• Mechanical condition

• Forming process

• Final application

• Applicable standard

• Quantity

• Packaging requirements

For precision forming, nominal diameter and dimensional tolerance should be confirmed separately.

Applications

Kitchen Racks and Baskets

AISI 304 EPQ wire can be used for kitchen racks, baskets, shelves, holders, and other formed stainless steel products.

The wire diameter should be selected according to the structure, forming equipment, and finished product dimensions.

Wire Forming

The wire can be processed into hooks, clips, brackets, retaining components, frames, and other custom wire forms.

Mesh and Grid Components

304 stainless steel wire can be considered for selected mesh, grid, rack, and related wire products where stainless steel material is required.

Hardware Components

The wire can be used for various stainless steel hardware components manufactured through bending, forming, cutting, and other downstream processes.

Industrial Components

For industrial applications, the wire specification can be defined according to material grade, diameter, tolerance, surface condition, and required forming process.

Product Advantages

AISI 304 Stainless Steel

AISI 304 provides a widely used stainless steel material option for general wire-forming and fabricated stainless steel products.

EPQ Wire for Forming Applications

The EPQ specification is intended for applications where stainless steel wire is further processed into formed components.

4mm Standard Product

The 4 mm specification is suitable for medium-size wire-forming applications where the finished component requires a defined wire diameter.

0.15–12 mm Supply Range

The 0.15–12 mm range allows buyers to select different wire diameters according to the finished product and forming process.

Specification-Based Production

Industrial orders can be defined by grade, diameter, tolerance, surface condition, mechanical condition, forming process, packaging, and application.

How to Select 304 EPQ Stainless Steel Wire

1. Confirm the Material Grade

AISI 304 can be considered for general stainless steel wire-forming applications. The final grade should be selected according to the working environment and required material properties.

2. Select the Wire Diameter

The diameter should match the finished component and forming equipment. This product is based on 4 mm, with a broader available range of 0.15–12 mm.

3. Confirm the Mechanical Condition

Different forming processes may require different mechanical conditions. The required condition should therefore be confirmed before production.

4. Check Dimensional Tolerance

For precision wire forming, dimensional tolerance can affect the fit and geometry of the finished component. Buyers should specify the required tolerance where necessary.

5. Confirm the Surface Condition

Surface condition should be selected according to appearance requirements, forming process, tooling, and subsequent processing.

6. Consider the Final Application

Kitchen racks, baskets, mesh, hardware, and industrial wire forms can have different requirements. Material selection should therefore be based on the finished product rather than diameter alone.

Technical Information for B2B Purchasing

When requesting a quotation for 304 EPQ stainless steel wire, buyers should provide:

1. Stainless steel grade

2. Wire diameter

3. Diameter tolerance

4. Surface condition

5. Mechanical condition

6. Forming method

7. Final application

8. Applicable standard

9. Required quantity

10. Coil or spool requirements

11. Packaging requirements

A drawing or technical specification can also be provided when the wire will be processed into a customized component.

Quality and Specification Control

For EPQ stainless steel wire, quality evaluation should be based on measurable specifications.

Depending on the order requirements, the technical specification can include:

• Material grade

• Chemical composition

• Wire diameter

• Diameter tolerance

• Mechanical condition

• Surface condition

• Applicable standard

• Inspection requirements

• Packaging requirements

For repeat production, maintaining the same agreed material and dimensional specifications provides a clear reference for subsequent orders.

FAQ

What is 304 EPQ stainless steel wire?

304 EPQ stainless steel wire is a stainless steel wire product intended for applications where the wire will be further formed into racks, baskets, hardware, mesh, and other components.

What is the standard size of this product?

The standard product size is 4 mm.

What diameter range is available?

The available stainless steel wire diameter range is 0.15–12 mm.

Is 304 EPQ wire suitable for kitchen racks?

Yes. AISI 304 EPQ wire can be considered for kitchen racks, baskets, shelves, holders, and other formed stainless steel products when the selected specification matches the finished product requirements.

Can the wire diameter be customized?

Yes. Different diameters within the 0.15–12 mm range can be supplied according to the required specification.

What information should I provide for a quotation?

Please provide the grade, diameter, quantity, surface condition, mechanical condition, dimensional tolerance, application, forming process, and packaging requirements.

Can OEM specifications be supplied?

Yes. OEM requirements can be evaluated based on technical drawings or detailed specifications covering material, diameter, tolerance, surface, mechanical condition, and packaging.

Recommended Technical Data

For a stronger technical product page, the following information can be added when confirmed by the factory:

• Tensile Strength

• Elongation

• Diameter Tolerance

• Surface Finish

• Mechanical Condition

• Applicable Standard

• Coil Weight

• Spool Type

• Material Certificate

• Inspection Report

• Packaging Specification