Product Specification

OEM Stainless Steel Wire for Custom Industrial Applications

Product Introduction

TOPONE OEM stainless steel wire is designed for manufacturers that require specific stainless steel grades, wire diameters, surface conditions, and mechanical properties for further processing.

The available diameter range is 0.15–12 mm, with common grades including 304, 304L, 316 and 316L. Different grades can be selected according to the required corrosion resistance, forming process, service environment, and applicable material standard.

The wire can be supplied with bright or soap-coated surface conditions according to the customer's processing requirements. For OEM production, diameter, tolerance, material grade, mechanical condition, surface finish, standard, packaging, and application should be confirmed before production.

Product Specifications

Specific tensile strength, elongation, dimensional tolerance, surface condition and mechanical requirements should be confirmed according to the selected grade, diameter and applicable standard.

304 Stainless Steel Wire

304 stainless steel wire is widely used for general industrial and formed-wire applications.

It can be considered for wire forming, racks, hangers, mesh, spring-related components and other applications where the required corrosion resistance and mechanical condition are compatible with the working environment.

For OEM applications, the required diameter, surface condition, tolerance and mechanical condition should be specified together with the material grade.

316 Stainless Steel Wire

316 stainless steel wire can be considered for applications where additional corrosion-resistance considerations are important.

It is commonly evaluated for industrial components exposed to moisture, marine environments, or other demanding service conditions.

The final material selection should be based on the actual working environment, applicable material standard and component requirements.

304L and 316L Stainless Steel Wire

304L and 316L are low-carbon versions of 304 and 316 stainless steel respectively.

These grades can be considered when the customer's fabrication process or material specification requires a low-carbon stainless steel grade.

For OEM purchasing, the required grade should be confirmed according to the customer's technical specification, fabrication process and service conditions.

Bright and Soap-Coated Surface Options

Bright Stainless Steel Wire

Bright stainless steel wire provides a clean metallic surface and can be used when surface appearance is important.

It can also be considered for applications where the wire will undergo further forming or processing and a bright surface condition is specified.

Soap-Coated Stainless Steel Wire

Soap-coated stainless steel wire provides a lubricated surface condition that can be suitable for certain drawing and forming processes.

The appropriate surface condition should be selected according to the customer's equipment, forming process, downstream processing and finished-component requirements.

0.15–12 mm Diameter Range

TOPONE stainless steel wire is available in diameters from 0.15 mm to 12 mm.

The correct diameter depends on the final component, forming process, mechanical requirements and dimensional tolerance.

For OEM applications, buyers should confirm:

• Wire diameter

• Diameter tolerance

• Stainless steel grade

• Mechanical condition

• Surface finish

• Applicable standard

• Forming or processing method

• Final application

• Packaging requirements

For precision applications, dimensional tolerance should be specified separately rather than relying only on the nominal wire diameter.

Applications

Wire Forming

Stainless steel wire can be processed into formed wire components, clips, hooks, retaining parts and other custom wire products.

Spring Manufacturing

Selected stainless steel grades and mechanical conditions can be used for compression springs, extension springs, torsion springs and other spring-related applications.

Kitchen and Hardware Products

304 stainless steel wire can be considered for racks, hangers, baskets, kitchen hardware and other formed stainless steel products.

Mesh and Wire Products

The wire can be used for mesh, grill components and other products requiring stainless steel wire with a specified diameter and surface condition.

Industrial Components

OEM stainless steel wire can be processed into industrial components where material grade, diameter, surface condition and mechanical properties need to match a defined technical specification.

Product Advantages

Multiple Stainless Steel Grades

304, 304L, 316 and 316L provide different material options for corrosion resistance, fabrication and application requirements.

0.15–12 mm Diameter Range

The 0.15–12 mm range covers fine wire through larger industrial wire requirements, allowing the specification to be selected according to the finished component.

Bright and Soap-Coated Surfaces

Different surface conditions can be selected according to forming, drawing, appearance and downstream processing requirements.

OEM Specification Support

The wire can be specified according to grade, diameter, tolerance, mechanical condition, surface finish, standard, packaging and application.

Application-Based Material Selection

304, 304L, 316 and 316L should be selected according to the actual working environment and manufacturing process rather than using one grade for every application.

How to Choose 304, 316 or 316L Stainless Steel Wire

Choose 304 When

304 can be considered for general stainless steel wire applications where corrosion resistance and forming performance meet the requirements of the working environment.

Consider 316 When

316 can be considered when the application involves more demanding corrosion conditions, including certain marine, humid or chloride-containing environments.

Consider 304L or 316L When

The low-carbon versions can be considered when the customer's material specification or fabrication process requires a low-carbon stainless steel grade.

Confirm the Wire Diameter

The diameter should be selected according to the finished component, forming process and dimensional requirements. The available range is 0.15–12 mm.

Confirm the Surface Condition

Bright and soap-coated surfaces have different processing characteristics. The surface should therefore be selected according to the customer's forming equipment and downstream process.

OEM Customization Requirements

For an OEM stainless steel wire order, the following information is recommended:

1. Stainless steel grade

2. Wire diameter

3. Diameter tolerance

4. Surface condition

5. Mechanical condition

6. Tensile strength requirement, if applicable

7. Applicable material standard

8. Coil or spool weight

9. Packaging requirements

10. Final application

11. Required quantity

Customers can provide technical drawings, existing wire specifications, material standards or finished-component requirements for specification evaluation.

Quality and Specification Control

For industrial and OEM applications, stainless steel wire specifications should be defined before production.

The agreed specification can include material grade, nominal diameter, dimensional tolerance, surface condition, mechanical condition, applicable standard and packaging.

For repeat orders, maintaining the same agreed specification provides a clear reference for subsequent purchasing and production requirements.

FAQ

What grades of stainless steel wire are available?

Common grades include 304, 304L, 316 and 316L. Other grades can be evaluated according to the application and technical requirements.

What is the available diameter range?

The current diameter range is 0.15–12 mm.

Can I order customized stainless steel wire?

Yes. OEM specifications can be evaluated according to grade, diameter, tolerance, surface condition, mechanical properties, standard, packaging and application.

Are bright and soap-coated surfaces available?

Yes. The product can be specified with a bright or soap-coated surface according to the required processing and application.

What is the difference between 304 and 316 stainless steel wire?

304 is widely used for general stainless steel applications, while 316 can be considered when additional corrosion-resistance requirements exist. Final selection should be based on the actual service environment.

What information should I provide for a quotation?

Please provide the grade, diameter, quantity, surface condition, mechanical condition, tolerance, application and packaging requirements for an accurate specification and quotation.