Product Specification

ASTM A580 430 Stainless Steel Annealed Wire, Bright Soft Finish, 0.15–12mm

Product Introduction

TOPONE 430 Stainless Steel Annealed Wire is a ferritic stainless steel wire supplied in an annealed and soft condition for applications requiring bending, forming, weaving, tying, and general fabrication.

The wire is available in diameters from 0.15mm to 12mm, with bright or matte surface options according to the application and processing requirements.

For projects requiring ASTM A580/A580M, the material can be supplied according to the applicable requirements for stainless steel wire, including chemical composition and mechanical properties.

430 stainless steel is a ferritic grade commonly selected for applications requiring stainless steel properties with moderate corrosion resistance and good fabrication characteristics. Final material selection should consider the working environment, forming method, temperature, and surface requirements.

Product Parameters

Note: Grade, diameter tolerance, surface condition, mechanical requirements, and applicable standards should be confirmed according to the specific purchasing specification before production.

430 Stainless Steel Annealed Wire Features

Annealed and Soft Condition

The annealing process provides a softer material condition suitable for downstream forming and fabrication processes.

Depending on the production requirements, annealed wire can be used for bending, wire forming, weaving, tying, and other fabrication operations where the material needs to undergo deformation.

0.15–12mm Diameter Range

TOPONE supplies 430 stainless steel annealed wire in diameters from 0.15mm to 12mm.

Different diameter ranges can be selected according to the finished component dimensions, forming equipment, required bending conditions, and mechanical requirements.

Bright and Matte Surface Options

The wire is available with bright or matte surface conditions.

Bright surface wire can be considered for applications where surface appearance is important, while matte surface can be selected according to the downstream processing method and application requirements.

The required surface condition should be specified together with the applicable material standard when placing an order.

Applications

Food Processing Equipment

430 stainless steel wire can be considered for selected food-processing equipment and fabrication applications where the environmental conditions are compatible with the material.

For direct food-contact applications, the applicable food-contact regulations, cleaning conditions, and sanitary requirements should be evaluated separately before material selection.

Wire Forming and Fabrication

The annealed condition makes 430 stainless steel wire suitable for various forming and fabrication processes, including:

• Wire bending

• Wire forming

• Component fabrication

• Clips and formed wire parts

• General hardware

• Industrial wire components

Weaving and Mesh Processing

Selected diameters of 430 annealed stainless steel wire can be used for weaving and mesh-processing applications where the required grade, surface condition, and mechanical properties are suitable for the production process.

General Industrial Applications

Depending on the required working conditions, 430 stainless steel annealed wire can also be considered for:

• Industrial equipment

• Hardware components

• Fabrication parts

• Wire assemblies

• Decorative wire products

• Functional wire components

How to Select 430 Stainless Steel Annealed Wire

1. Confirm the Stainless Steel Grade

Specify AISI 430 or the corresponding designation required by the purchasing standard.

The chemical composition should be verified against the applicable material specification.

2. Select the Wire Diameter

The available diameter range is 0.15–12mm.

Diameter selection should consider the finished component dimensions, forming radius, processing equipment, and required mechanical properties.

3. Confirm the Temper

For forming-oriented applications, specify the required annealed / soft condition rather than ordering only by grade and diameter.

4. Specify the Surface

Choose bright or matte surface according to the application, appearance requirements, and subsequent processing.

5. Confirm the Applicable Standard

For projects specified to ASTM A580/A580M, the applicable requirements should be confirmed together with grade, diameter, mechanical properties, surface condition, and supply condition.

Quality Control and Technical Information

For B2B stainless steel wire procurement, the material specification should be clearly defined before production.

Key parameters can include:

• Stainless steel grade

• Wire diameter

• Diameter tolerance

• Surface condition

• Annealed condition

• Applicable standard

• Coil or spool requirements

• Coil weight

• Packing requirements

• Inspection documentation

For customized requirements, buyers can provide the grade, diameter, quantity, surface condition, application, and applicable standard so that the appropriate production specification can be evaluated.

FAQ

What is 430 stainless steel annealed wire?

430 stainless steel annealed wire is a ferritic stainless steel wire supplied in a softened annealed condition. It is used for selected forming, fabrication, weaving, and industrial applications.

What diameter range is available?

The available diameter range for this product is 0.15–12mm.

Is 430 annealed wire available with a bright surface?

Yes. The wire can be supplied with bright or matte surface options, depending on the application and specification.

Can 430 stainless steel wire be used for food processing?

430 stainless steel wire can be considered for selected food-processing equipment applications. However, suitability depends on the actual working environment, cleaning conditions, and whether the wire is exposed to direct food contact. Applicable regulations should be confirmed for specific food-contact applications.

What standards are available?

The wire can be supplied according to applicable standards such as ASTM A580/A580M, JIS, EN, DIN, and GB, subject to the specific order requirements.

What information should I provide when requesting a quotation?

For an accurate specification review, provide the stainless steel grade, diameter, quantity, surface condition, required standard, application, and preferred packing method.

Manufacturing and Inspection

The production process for stainless steel wire can include:

Raw Material → Wire Drawing → Annealing → Surface Treatment → Diameter Inspection → Final Inspection → Packing

Inspection and production requirements can be organized according to the agreed material grade, diameter, surface condition, mechanical requirements, and applicable standard.

For technical or customized requirements, the purchasing specification should be confirmed before production.