Product Specification

AISI ASTM Stainless Steel Wire 0.15–12mm Multi-Grade Options

Product Introduction

TOPONE Stainless Steel Wire is available in multiple stainless steel grades and diameters for industrial manufacturing, wire forming, mesh production, springs, fasteners and other wire-based applications.

Available grades include 201, 304, 304L, 316, 316L, 410 and 430 stainless steel, allowing manufacturers to select the material according to corrosion exposure, mechanical requirements, forming process and final application.

The product range covers 0.15–12mm, with specific diameters such as 1mm, 1.2mm, 1.5mm and 2mm available for different production requirements.

Depending on the grade and application, stainless steel wire can be supplied with different surface conditions and mechanical properties. Customers can specify the required material standard, diameter, surface and mechanical requirements when requesting a quotation.

Product Parameters

Stainless Steel Grade Selection

Different stainless steel grades provide different material characteristics. Grade selection should be based on the actual application rather than using one grade for every purpose.

201 Stainless Steel Wire

201 stainless steel wire can be considered for applications where cost, forming requirements and general corrosion resistance need to be balanced.

Typical applications include general wire products, mesh and formed components.

304 and 304L Stainless Steel Wire

304 is a widely used austenitic stainless steel grade for general industrial and manufacturing applications.

304L has a lower carbon content and can be considered for applications where welding-related material requirements need to be taken into account.

316 and 316L Stainless Steel Wire

316 and 316L stainless steel contain molybdenum and are commonly selected for applications where greater corrosion resistance is required, particularly where moisture or chloride exposure is involved.

The appropriate grade should be determined according to the actual operating environment.

410 Stainless Steel Wire

410 is a martensitic stainless steel grade that can be considered where higher hardness and strength characteristics are required together with stainless steel properties.

Its suitability depends on the required heat-treatment condition and final application.

430 Stainless Steel Wire

430 is a ferritic stainless steel grade commonly used in applications where its material characteristics, corrosion resistance and forming requirements are appropriate.

It can be considered for selected industrial and household components.

Diameter Options

TOPONE stainless steel wire is available in a 0.15–12mm diameter range.

Common specifications within this range include:

• 1.0mm stainless steel wire

• 1.2mm stainless steel wire

• 1.5mm stainless steel wire

• 2.0mm stainless steel wire

The required wire diameter should be selected according to the customer's product drawing, forming equipment, mesh opening, spring design or component requirements.

For precision applications, diameter tolerance should be confirmed together with the applicable material standard.

Surface Options

Surface condition is an important specification for stainless steel wire because it can affect appearance, forming and downstream processing.

Bright Surface

Bright stainless steel wire can be used where a clean metallic appearance and controlled surface condition are required.

Matte Surface

Matte or dull surface wire can be considered for applications where surface appearance and processing requirements differ from bright wire.

Soap-Coated Surface

Soap-coated wire can be considered for certain drawing, forming and spring-manufacturing processes where additional surface lubrication is required.

The suitable surface should be confirmed according to the customer's manufacturing process.

Applications

Multi-grade stainless steel wire can be used in:

• Stainless steel mesh

• Spring manufacturing

• Wire forming

• Fasteners

• Screws

• Wire products

• Industrial components

• Automotive components

• Kitchen and household products

• Construction-related wire products

• General metal manufacturing

Product Advantages

1. Multiple Stainless Steel Grades

The product range includes 201, 304, 304L, 316, 316L, 410 and 430 grades for different material-selection requirements.

2. 0.15–12mm Diameter Range

TOPONE supplies stainless steel wire from 0.15–12mm, covering fine wire through larger industrial wire specifications.

3. Multiple Surface Conditions

Bright, matte and soap-coated surface options can be selected according to the application and downstream processing requirements.

4. Standard-Based Specification

Material grade, diameter, surface condition and mechanical properties can be specified according to applicable AISI, ASTM, JIS, DIN, EN or GB requirements.

5. Application-Based Material Selection

Different grades can be selected according to corrosion exposure, mechanical requirements, forming process and final product design.

How to Select Stainless Steel Wire

Before purchasing stainless steel wire, manufacturers should confirm the following:

Quality Control Considerations

For industrial stainless steel wire, product evaluation should focus on measurable specifications.

Relevant inspection items can include:

• Chemical composition

• Stainless steel grade

• Wire diameter and tolerance

• Surface condition

• Tensile strength

• Elongation

• Hardness where applicable

• Applicable material standard

• Coil or spool dimensions

• Packaging condition

These parameters allow manufacturers to verify whether the wire matches their production process and finished-product requirements.

FAQ

What stainless steel grades are available?

TOPONE stainless steel wire can be supplied in 201, 304, 304L, 316, 316L, 410 and 430 grades, depending on the required product specification.

What is the stainless steel wire diameter range?

The standard product range is 0.15–12mm. Specific diameters such as 1mm, 1.2mm, 1.5mm and 2mm can be selected according to the application.

Which stainless steel grade should I choose?

Grade selection depends on the required corrosion resistance, mechanical properties, forming process and operating environment. 304 and 316 are common choices for different corrosion-resistance requirements, while 201, 410 and 430 may be considered for applications with different material characteristics.

What surface finishes are available?

Bright, matte and soap-coated surfaces can be supplied according to the product specification and downstream processing requirements.

Can stainless steel wire be supplied according to ASTM?

Yes. Stainless steel wire specifications can be discussed according to applicable ASTM requirements, together with the required grade, diameter, surface and mechanical properties.