Product Specification

316/316L EPQ Stainless Steel Wire 0.15–12mm for Bathroom Accessories

Product Introduction

TOPONE 316/316L EPQ stainless steel wire is a bright-surface stainless steel forming wire designed for bathroom accessories, kitchen hardware and other precision wire-forming applications.

The wire is available in AISI 316 and 316L stainless steel, with a diameter range of 0.15–12mm. The bright surface is suitable for applications where surface appearance and forming characteristics are important.

EPQ wire is commonly selected for components that require controlled wire dimensions, suitable forming properties and a clean stainless steel surface. Typical applications include bathroom accessories, kitchen baskets, racks, hooks and other formed-wire products.

For production applications, material grade, wire diameter, dimensional tolerance, surface condition and mechanical properties should be confirmed according to the customer's forming process and finished component requirements.

Product Specifications

Technical Note: Mechanical properties such as tensile strength and elongation should be confirmed according to the selected material grade, diameter and applicable standard. Values should not be generalized across the complete 0.15–12mm range.

316/316L EPQ Wire for Bathroom Accessories

Bathroom Hardware

316/316L EPQ wire can be formed into bathroom accessories such as hooks, racks, holders and other wire-formed components.

For bathroom applications, material selection should consider moisture exposure, cleaning conditions, forming requirements and the required surface appearance.

Kitchen Accessories

The wire can also be used for kitchen baskets, racks, holders and other formed-wire products where a stainless steel surface and controlled wire dimensions are required.

Wire-Formed Components

The product can be processed into various formed-wire components according to the customer's drawing and forming equipment.

Typical factors include:

• Wire diameter

• Diameter tolerance

• Material grade

• Bending radius

• Forming sequence

• Surface requirement

• Finished component dimensions

316 vs 316L Stainless Steel Wire

316 Stainless Steel Wire

316 stainless steel wire can be specified for applications requiring a stainless steel material suitable for demanding service environments.

The exact specification should be selected according to the applicable material standard and working conditions.

316L Stainless Steel Wire

316L is the low-carbon variant of 316 stainless steel. It can be considered where the material specification requires the lower-carbon grade, particularly for applications involving fabrication or welding requirements.

How to Choose 316 or 316L?

The choice should be based on:

• Applicable material standard

• Fabrication process

• Welding requirements

• Corrosion exposure

• Forming requirements

• Finished product specifications

For a standardized project, the customer's drawing or material specification should be used as the primary reference.

Bright Surface for Wire Forming

The bright surface is suitable for formed-wire products where a clean metallic appearance is required.

For bathroom and kitchen accessories, surface condition can affect:

• Finished appearance

• Cleaning requirements

• Subsequent polishing

• Forming process

• Customer's surface treatment process

If additional polishing, electro-polishing or other surface treatment is required, this should be confirmed before production.

Product Advantages

316/316L Material Options

TOPONE provides both 316 and 316L stainless steel wire options for customers who need to specify the material grade according to application and manufacturing requirements.

0.15–12mm Diameter Range

The wire is supplied in diameters from 0.15mm to 12mm, covering fine forming wire and larger wire-forming applications.

For precision bathroom accessories, diameter tolerance should be specified together with the nominal wire diameter.

Bright Surface

The bright surface is suitable for formed components where the appearance of the stainless steel wire is part of the finished product requirement.

Suitable for Wire Forming

The product can be processed into hooks, racks, baskets, holders and other formed-wire components according to the required diameter, mechanical condition and forming process.

Specification-Based Production

The wire can be specified according to:

• Material grade

• Diameter

• Diameter tolerance

• Mechanical properties

• Surface condition

• Applicable standard

• Coil or spool

• Packaging requirements

This specification-based approach helps match the wire with the customer's actual forming process.

Applications

Bathroom Accessories

Typical applications include:

• Bathroom hooks

• Towel racks

• Storage racks

• Holders

• Wire baskets

• Bathroom hardware components

Kitchen Accessories

The wire can be used for:

• Kitchen baskets

• Dish racks

• Storage racks

• Kitchen hooks

• Formed-wire holders

Other Formed-Wire Products

Depending on the required specification, 316/316L EPQ wire can also be considered for:

• Wire frames

• Clips

• Hooks

• Decorative wire products

• Custom formed-wire components

How to Select 316/316L EPQ Stainless Steel Wire?

1. Confirm the Material Grade

Specify 316 or 316L according to the required material standard and application.

2. Confirm the Wire Diameter

Select the required diameter within the 0.15–12mm range.

For precision forming, confirm the required diameter tolerance as well.

3. Define the Surface Requirement

Bright surface should be selected when the wire appearance is important to the finished product.

If the component requires additional polishing or electro-polishing, specify the final surface requirement before production.

4. Confirm the Forming Process

The required wire specification should match the forming equipment and process, including:

• Bending

• Coiling

• Cutting

• Welding

• Straightening

• Multi-step forming

5. Confirm the Finished Application

Specify whether the wire will be used for bathroom accessories, kitchen racks, baskets, hooks or another formed-wire component.

6. Provide the Drawing When Required

For customized wire-forming products, a technical drawing can help define diameter, tolerance, bending geometry and final dimensions more accurately.

Quality & Specification Control

For EPQ stainless steel wire, quality evaluation should be based on measurable specifications.

Relevant inspection items may include:

• Material grade

• Chemical composition

• Wire diameter

• Diameter tolerance

• Surface condition

• Tensile strength

• Elongation

• Coil dimensions

• Packaging

• Material traceability

For precision forming applications, the customer's technical drawing and applicable material standard should be used as the primary reference.

Buyer Specification Checklist

Providing these specifications helps define the required EPQ wire before quotation and production.

FAQ

What is 316/316L EPQ stainless steel wire?

316/316L EPQ stainless steel wire is a bright-surface stainless steel forming wire used for bathroom accessories, kitchen hardware and other wire-formed components.

What is the diameter range?

TOPONE supplies this product range from 0.15mm to 12mm. The required diameter tolerance should be confirmed according to the finished product and applicable standard.

What is EPQ stainless steel wire used for?

EPQ wire is commonly used for formed-wire products such as bathroom accessories, kitchen baskets, racks, hooks and holders.

Why choose a bright surface?

A bright surface can be selected when the finished component requires a clean stainless steel appearance and the surface condition is part of the product specification.

What is the difference between 316 and 316L?

316L is the lower-carbon variant of 316 stainless steel. The appropriate grade should be selected according to the applicable material standard, fabrication process and application requirements.

Can the wire be customized?

Diameter, tolerance, mechanical requirements, surface condition, packaging and other specifications can be discussed according to the customer's application.

What information should I provide for a quotation?

Provide the material grade, diameter, tolerance, surface, standard, quantity, application and forming process. A technical drawing is recommended for customized bathroom or kitchen accessories.

Technical Inquiry

For a 316/316L EPQ stainless steel wire inquiry, please provide:

Grade + Diameter + Tolerance + Surface + Standard + Quantity + Application

Example:

316L + 3.0mm + Bright Surface + Customer Specification + 1,000kg + Bathroom Wire Rack