Product Specification

0.15–0.3mm 304/316 Fine Stainless Steel Wire for Spinning

Product Introduction

TOPONE 304/316 fine stainless steel wire is designed for applications requiring controlled fine-wire dimensions, including spinning yarn, textile processing and other precision wire applications.

The featured diameter range is 0.15–0.3mm, providing fine stainless steel wire options for applications where wire diameter, surface condition and mechanical properties need to be carefully matched with downstream equipment.

304 and 316 stainless steel grades can be selected according to the required corrosion resistance and application environment. Bright and soap-coated surface options can be discussed according to the production process.

For other stainless steel wire requirements, TOPONE can supply diameters from 0.15–12mm according to the selected grade, specification and application.

Product Specifications

Final diameter tolerance, tensile strength, surface condition, spool specification and applicable standard should be confirmed according to the customer's requirements.

0.15–0.3mm Fine Stainless Steel Wire

The 0.15–0.3mm range is the key specification of this product and is suitable for applications requiring relatively fine stainless steel wire.

At this diameter range, wire diameter and tolerance can directly affect downstream feeding, forming and processing. Therefore, buyers should confirm the required diameter, tolerance, material grade and mechanical properties before production.

Typical requirements may include:

• Exact wire diameter

• Diameter tolerance

• Tensile strength

• Elongation

• Surface condition

• Spool dimensions

• Wire length

• Final application

304 Stainless Steel Fine Wire

304 stainless steel can be selected for general fine-wire applications where its corrosion resistance and mechanical properties meet the application requirements.

It can be used for textile-related wire processing, spinning applications, fine wire components and other industrial applications.

316 Stainless Steel Fine Wire

316 stainless steel can be considered when the application requires a different corrosion-resistance specification.

The choice between 304 and 316 should be based on the service environment, processing conditions and applicable material standard.

Surface Options

Bright Surface

Bright surface is suitable for applications requiring a clean metallic appearance and controlled surface condition.

Soap-Coated Surface

Soap-coated wire can be considered when the wire will be used in a drawing, forming or feeding process where the surface condition needs to match the production equipment.

Applications

Spinning Yarn

The 0.15–0.3mm fine stainless steel wire can be used in specialized spinning-yarn and textile-related applications where a controlled fine metallic wire is required.

The actual specification should be matched with the yarn construction, spinning equipment and downstream processing method.

Textile Processing

Fine stainless steel wire can be incorporated into or processed with textile products where the required wire diameter and mechanical properties are suitable.

Fine Wire Components

Depending on the selected grade and mechanical properties, 0.15–0.3mm stainless steel wire can also be considered for fine wire components, weaving and other precision wire applications.

Product Advantages

0.15–0.3mm Fine Wire Range

The featured 0.15–0.3mm range provides fine-wire options for applications requiring smaller stainless steel wire dimensions.

304 and 316 Material Options

304 and 316 grades can be selected according to corrosion conditions and application requirements.

Spool Supply

Spool packaging provides a practical format for controlled wire handling and continuous feeding. Spool dimensions can be specified according to the customer's equipment.

Bright and Soap-Coated Surfaces

Different surface conditions can be selected according to downstream processing and application requirements.

0.15–12mm Broader Supply Range

In addition to the featured 0.15–0.3mm range, TOPONE can supply stainless steel wire from 0.15–12mm for other industrial applications.

Manufacturing and Quality Control

For fine stainless steel wire, quality control should focus on measurable specifications rather than general descriptions.

The following parameters can be confirmed according to the purchasing specification:

• Material grade

• Wire diameter

• Diameter tolerance

• Tensile strength

• Elongation

• Surface condition

• Spool dimensions

• Wire length

• Applicable standard

For repeat orders, establishing the same material, diameter, tolerance, surface and spool specification can help maintain consistent purchasing requirements.

How to Select 0.15–0.3mm Stainless Steel Wire

1. Confirm Wire Diameter

Select the diameter according to the finished product and production equipment.

The featured range of this product is 0.15–0.3mm.

2. Select the Material Grade

304 and 316 can be selected according to corrosion resistance and application environment.

3. Confirm Mechanical Properties

Tensile strength and elongation should be matched with the spinning, feeding or forming process.

4. Select Surface Condition

Bright or soap-coated surface should be selected according to the downstream production process.

5. Confirm Spool Requirements

For spool-packed fine wire, confirm the required spool dimensions, wire length, winding method and equipment compatibility.

FAQ

What is the featured diameter range?

The key diameter range is 0.15–0.3mm. Other stainless steel wire sizes from 0.15–12mm can also be supplied according to requirements.

Is 304 stainless steel available?

Yes. 304 is available for applications where its material properties are suitable.

Is 316 stainless steel available?

Yes. 316 can be selected when the application requires a different corrosion-resistance specification.

Can the wire be supplied on a spool?

Yes. Spool packaging can be customized according to wire length, spool dimensions and production equipment.

What information should be provided for purchasing?

Buyers should provide the stainless steel grade, exact diameter, tolerance, tensile strength, surface condition, spool requirements, quantity and final application.