Product Specification

2.4mm 304/316 Stainless Steel Wire for Precision Forming

Product Introduction

TOPONE 2.4mm 304/316 stainless steel wire is manufactured for industrial forming, spring components, wire forms and other applications requiring controlled wire dimensions and suitable surface conditions.

The product range covers 0.15–12mm diameters, with 304, 316, 316L and other stainless steel grades available according to application requirements. Bright and soap-coated (matte) surfaces can be selected based on forming, drawing and downstream processing needs.

For applications with specific mechanical or dimensional requirements, material grade, diameter tolerance, surface condition, tensile strength and applicable standard should be confirmed before production.

Product Specifications

304 and 316 Stainless Steel Options

304 stainless steel wire can be considered for general industrial forming, spring and wire component applications where the required corrosion resistance and mechanical properties are suitable.

316/316L stainless steel wire can be selected when the application requires a different level of corrosion resistance or when the customer's material specification calls for these grades.

Material selection should be based on the actual operating environment, forming process, mechanical requirements and applicable standard rather than diameter alone.

Surface Options

Bright Stainless Steel Wire

Bright surface wire is suitable for applications where a clean metallic surface is required. It can be used for formed wire components, springs, hooks, racks and other products where surface appearance is part of the specification.

Soap-Coated Stainless Steel Wire

Soap-coated wire provides a lubricated matte surface that can be considered for certain drawing, forming and wire-processing operations.

The appropriate surface should be selected according to the customer's tooling, forming process and downstream requirements.

Application Fields

Spring Manufacturing

304 and 316 stainless steel wire can be used for selected compression, extension, torsion and formed spring applications. The final grade and mechanical condition should be determined according to spring design and operating requirements.

Wire Forms and Formed Components

The 2.4mm diameter can be used for wire forms, clips, hooks and other bent or formed components where the specified diameter, material grade and surface condition match the production process.

Kitchen and Food-Related Wire Products

Stainless steel wire is commonly used for racks, baskets, hangers and other kitchen wire products. Material grade and applicable standards should be selected according to the finished product requirements.

Cable and Industrial Wire Components

Fine and medium-diameter stainless steel wire can be used in selected cable components and industrial wire assemblies where stainless steel properties are required.

Secondary Drawing and Wire Processing

The 0.15–12mm product range provides multiple diameter options for customers carrying out further drawing, forming or component manufacturing. For secondary processing, diameter tolerance, surface condition and material condition should be confirmed in advance.

Product Advantages

Multiple Diameter Options

The product range covers 0.15–12mm, while 2.4mm is available as a featured specification. This allows diameter selection according to the finished component design and processing requirements.

Multiple Stainless Steel Grades

304, 316, 316L and other stainless steel grades are available for different application requirements. Grade selection can be based on corrosion exposure, forming requirements, mechanical properties and applicable standards.

Bright and Soap-Coated Surfaces

Both bright and soap-coated surface conditions can be selected according to downstream processing requirements. This provides flexibility for forming, drawing and wire component production.

Standards for Industrial Applications

The product can be supplied according to ASTM A580, JIS G4309, EN 10088-3, GB/T4240 and equivalent standards, subject to the specific material and product specification.

Coil or Spool Supply

The wire can be supplied in coil or spool form according to production and processing requirements. Packaging can also be discussed according to the customer's handling and production equipment.

How to Select the Right Stainless Steel Wire

When selecting stainless steel wire, diameter should not be considered separately from the material and processing conditions.

For a technical inquiry, it is recommended to confirm:

1. Material grade: 304, 316, 316L or another specified grade

2. Diameter: 2.4mm or another required size within 0.15–12mm

3. Diameter tolerance: Based on drawing or applicable standard

4. Surface: Bright or soap coated

5. Mechanical requirements: Tensile strength, elongation or hardness when required

6. Processing method: Spring forming, bending, drawing, welding or other downstream processes

7. Applicable standard: ASTM, JIS, EN, GB or customer specification

8. Supply form: Coil, spool or customized packaging

For precision applications, a technical drawing or complete specification is recommended before production.

FAQ

What is the available diameter range?

The stainless steel wire product range is available from 0.15mm to 12mm. The featured specification on this page is 2.4mm.

Is 304 stainless steel wire available in 2.4mm?

Yes. 304 is one of the available stainless steel grades for this product range. The final surface, tolerance and mechanical condition should be confirmed according to the application.

Can 316 or 316L stainless steel wire be supplied?

Yes. 316 and 316L are available options for applications requiring these material grades.

What surface options are available?

The main surface options are bright and soap coated (matte). The appropriate surface depends on the forming, drawing and downstream processing requirements.

What standards can be followed?

The wire can be supplied according to applicable ASTM A580, JIS G4309, EN 10088-3, GB/T4240 and equivalent specifications.

What information should be provided for a quotation?

For an accurate technical quotation, provide the material grade, diameter, tolerance, surface condition, mechanical requirements, applicable standard, application, required quantity and packaging requirements.