| Material | Stainless steel |
| Supply Ability | >500 tons per month |
| Diameter | 0.15-12mm |
| Delivery Time | 1-15 days |
| Standard | JIS G. EN. ASTM. DIN. GB etc |
| Payment Terms | D/P,L/C,T/T |
| Surface | Bright or Soap cotaed |
| Packaging Details | coil or spool with plate. |
| packing | by customer request |
| Model Number | 201/302/304/316/316L |
| Certification | ISO9001:2015 |
| Brand Name | Toponewire |
| Place of Origin | China |
View Detail Information
Explore similar products
Flexible Connectors Stainless Steel Annealed Wire SS Annealed Tie Wire
304 Soft Annealed Stainless Steel Wire Industrial Diameter 0.8mm-15mm
Anti Corrosion Stainless Steel Annealed Tie Wire High Or Low Temperature
430 Stainless Steel Annealed Wire High Luster Rigidity For Industry Machinery
Product Specification
| Material | Stainless steel | Supply Ability | >500 tons per month |
| Diameter | 0.15-12mm | Delivery Time | 1-15 days |
| Standard | JIS G. EN. ASTM. DIN. GB etc | Payment Terms | D/P,L/C,T/T |
| Surface | Bright or Soap cotaed | Packaging Details | coil or spool with plate. |
| packing | by customer request | Model Number | 201/302/304/316/316L |
| Certification | ISO9001:2015 | Brand Name | Toponewire |
| Place of Origin | China | ||
| High Light | Stainless wire for wall ties ,0.15-12mm stainless steel wire ,Annealed stainless wire for facades | ||
Wire that goes into a wall cannot be replaced afterwards. That is the whole argument for stainless in masonry ties, and it is a corrosion argument rather than a strength one. A galvanised tie that starts to rust expands several times its own thickness, cracks the surrounding mortar, lets water in and corrodes faster. On coastlines and in industrial atmospheres this sequence is common enough that it is designed against rather than inspected for.
Stainless wire removes the sequence at the material level. 316L holds its passive layer in salt air, de-icing salt and industrial atmosphere; 304 is adequate for inland general exposure. This wire is annealed at 550-750 N/mm2 from 0.15 mm to 12 mm, with 3-6 mm used for ties and 1-3 mm for facade mesh and railing infill.
Surface finish is a cost decision, not a performance one, for embedded parts: bright or pickled wire performs the same inside a mortar bed, so the finish should only be upgraded where the wire stays visible.
| Item | Specification |
|---|---|
| Product | Annealed stainless steel wire for building and facade use |
| Material grade | 304 / 316L |
| Wire diameter | 0.15-12 mm (ties 3-6 mm; mesh 1-3 mm) |
| Temper | Annealed, soft |
| Tensile strength | 550-750 N/mm2 |
| Surface finish | Bright annealed, bright drawn, or pickled |
| Corrosion service | 304 inland; 316L for coastal, de-icing salt and industrial atmosphere |
| Coil weight | 20-250 kg coil; spool on request |
| Reference standard | ASTM A580; EN 845-1 where the tie design calls for it |
| Packing | VCI paper, PP film, wooden pallet |
| MOQ | 500 kg per size |
| Certification | ISO 9001; mill test report 3.1 per EN 10204 |
Coastal distance, prevailing wind and de-icing practice decide between 304 and 316L more reliably than the building type does. A facade 200 m from the sea is a 316L project regardless of how the drawings are labelled.
Embedded ties sit in mortar that stays damp for long periods after construction, then dries slowly. Exposed mesh alternates between wet and dry and can be washed down. Both are chloride cases in coastal work, but only the embedded part has no inspection access.
Ties and facade anchors are usually specified to the life of the structure. Where that figure is 50 years, the material choice has to be made once, at order stage, rather than corrected later.
Cavity ties and anchors in 3-6 mm wire, bent into the profile the wall design requires, usually 316L on coastal projects.
Support wire and woven infill panels in 1-3 mm, bright annealed where the mesh stays visible and pickled where it is concealed.
Vertical and horizontal wire infill for railings and balustrades, where the wire is visible and hand contact is constant.
Rod grade is verified by chemical or PMI check before drawing. Diameter is measured inline with end-of-coil sampling, tensile and elongation are tested per heat per ISO 6892-1, and surface is inspected for scale, scratches and die lines. Coil build and packing are checked before dispatch.
Send the grade, diameter, exposure condition and profile for technical confirmation and quotation.
Company Details
Business Type:
Manufacturer
Year Established:
1993
Total Annual:
>7000000-8000000
Employee Number:
>1000~2000
Ecer Certification:
Verified Supplier
What We Do As the most reliable and trustworthy factory in the stainless steel wire industry of China, Huayuan Metal manufactures stainless steel wires constant in quality and favorable in price for purchasers all around the world. Our advanced logistics solutions provide a guarantee for ou... What We Do As the most reliable and trustworthy factory in the stainless steel wire industry of China, Huayuan Metal manufactures stainless steel wires constant in quality and favorable in price for purchasers all around the world. Our advanced logistics solutions provide a guarantee for ou...
Get in touch with us
Leave a Message, we will call you back quickly!