China factories

Chat Now Send Email
China factory - Ningbo Huayuan Metal Products Co.,Ltd

Ningbo Huayuan Metal Products Co.,Ltd

  • China,Ningbo
  • Verified Supplier
  1. Home
  2. Products
  3. About Us
  4. Contact Us

Leave a Message

we will call you back quickly!

Submit Requirement
China 430 Stainless Wire 0.15-12mm for Heat and Thermal Cycling
China 430 Stainless Wire 0.15-12mm for Heat and Thermal Cycling

  1. China 430 Stainless Wire 0.15-12mm for Heat and Thermal Cycling

430 Stainless Wire 0.15-12mm for Heat and Thermal Cycling

  1. MOQ: 1000KG
  2. Price: Negotiation
  3. Get Latest Price
Payment Terms D/P,L/C,T/T,D/A
diameter 0.15-12mm
surface matt or bright
Surface Bright,Matte
Standard JIS G. EN. ASTM. DIN. GB etc
Packaging Details Coil/Pallet/Spool/By customere request
Delivery Time 1-15 days
Supply Ability >10000KGS per week
packing by customer request
Material 430/410
Length Customer Request
Model Number 201/302/304/316/316L
Certification ISO9001:2015
Brand Name TOPONE
Place of Origin China

View Detail Information

Inquiry by Email Get Latest Price
Chat online Now Ask for best deal
  1. Product Details
  2. Company Details

Product Specification

Payment Terms D/P,L/C,T/T,D/A diameter 0.15-12mm
surface matt or bright Surface Bright,Matte
Standard JIS G. EN. ASTM. DIN. GB etc Packaging Details Coil/Pallet/Spool/By customere request
Delivery Time 1-15 days Supply Ability >10000KGS per week
packing by customer request Material 430/410
Length Customer Request Model Number 201/302/304/316/316L
Certification ISO9001:2015 Brand Name TOPONE
Place of Origin China
High Light 430 stainless wire for thermal cycling ,0.15-12mm stainless steel wire ,annealed stainless steel wire

430 Stainless Steel Wire for Heat Exposure and Thermal Cycling

430 is often ordered as the cheaper alternative to 304. In parts that cycle between hot and cold, the real reason is different: thermal expansion. 430 is ferritic with a linear expansion coefficient around 10.4 x 10-6 /K, against roughly 17.3 x 10-6 /K for austenitic 304. Over a heating cycle that difference decides how much stress builds at a fixed weld or a clamped joint.

This wire is annealed and soft at 450-650 N/mm2, supplied bright annealed or bright drawn from 0.15 mm to 12 mm. It carries 16-18% chromium, so a chromium oxide layer forms and re-forms after each cycle instead of needing to be replaced.

Two limits belong in the same conversation. Prolonged holding around 475 C embrittles ferritic grades, and welding grows the grain structure and lowers toughness at the joint. Both are design constraints, not reasons to avoid the grade.

Product Specifications

Item Specification
Product Annealed 430 ferritic stainless steel wire
Material grade AISI 430, 16-18% Cr, nickel-free
Wire diameter 0.15-12 mm
Temper Annealed, soft
Tensile strength 450-650 N/mm2
Linear expansion Approx. 10.4 x 10-6 /K
Magnetic behaviour Ferromagnetic at room temperature
Surface finish Bright annealed or bright drawn
Coil weight 20-250 kg coil; spool on request
Reference standard ASTM A580
Packing VCI paper, PP film, wooden pallet
MOQ 500 kg per size
Certification ISO 9001; mill test report 3.1

Why 430 in Heat Service

Lower expansion means lower thermal stress

A wire frame fixed at both ends and heated will push against its anchors in proportion to its expansion. At the same temperature rise, 430 moves roughly 40% less than 304, which is the difference between a frame that stays flat and one that bows or cracks its weld.

Oxide layer that survives cycling

Chromium in the 16-18% range forms a thin oxide that re-forms after each thermal cycle. This is why 430 is used for supports and brackets that see repeated heating rather than one continuous soak.

Two limits to design around

Holding near 475 C for long periods embrittles ferritic 430, so continuous service in that band should be reviewed with the end user. Welding also coarsens the grain and reduces toughness at the joint, which means heat input and joint location have to be planned rather than assumed.

Applications

Heating element supports and brackets

Wire forms that locate and space resistance elements, where repeated heating cycles and modest mechanical load are the design case.

Grills, burners and oven parts

Racks, trivets and burner frames that see radiant heat and occasional flame contact, with no chloride detergents in service.

Magnetic locating and shielding parts

Components that must be held or positioned magnetically during assembly, where an austenitic grade would not respond.

Product Advantages

  • Expansion about 40% lower than 304 - less thermal stress at fixed joints and welds over the same temperature rise.
  • Chromium oxide layer that re-forms - 16-18% Cr supports repeated heating instead of a single long soak.
  • Nickel-free cost structure - the saving is real at coarse diameters, where nickel dominates the price.
  • Ferromagnetic - parts can be handled, located or separated magnetically.
  • Annealed for forming - 450-650 N/mm2 keeps 0.15-12 mm wire bendable around element spacings and frame corners.
  • Limits stated honestly - avoid prolonged service near 475 C, control weld heat input, and specify 304 or 316L where moisture, detergent or chlorides are present.

Quality Control

Rod grade is verified before drawing, diameter is measured inline with end-of-coil sampling, and tensile and elongation are tested per heat per ISO 6892-1. Surface is inspected for scale, scratches and die lines, and coil build is checked before packing.

Selection and Ordering Notes

  1. State the service temperature and whether it is continuous or cyclic, so the 475 C band can be reviewed.
  2. Give the fixing method at both ends of the part, which sets how much expansion has to be absorbed.
  3. Confirm whether any joint is welded, and where it sits relative to the hot zone.
  4. Confirm the atmosphere: dry heat is 430 territory; moisture, detergent or chlorides call for 304 or 316L.
  5. Provide sizes and annual volume for a tolerance and packing review.

Send the grade, diameter, service temperature and fixing arrangement for technical confirmation and quotation.

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer

  • Year Established:

    1993

  • Total Annual:

    >7000000-8000000

  • Employee Number:

    >1000~2000

  • Ecer Certification:

    Verified Supplier

What We Do As the most reliable and trustworthy factory in the stainless steel wire industry of China, Huayuan Metal manufactures stainless steel wires constant in quality and favorable in price for purchasers all around the world. Our advanced logistics solutions provide a guarantee for ou... What We Do As the most reliable and trustworthy factory in the stainless steel wire industry of China, Huayuan Metal manufactures stainless steel wires constant in quality and favorable in price for purchasers all around the world. Our advanced logistics solutions provide a guarantee for ou...

+ Read More

Get in touch with us

  • Reach Us
  • Ningbo Huayuan Metal Products Co.,Ltd
  • Ningbo Huayuan Metal Products Co.,Ltd.Add: Wuxiang Industrial Zone,Yinzhou District,Ningbo City, Zhengjiang Province, China,315111
  • https://www.toponewire.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement