Product Specification

201 Stainless Steel Wire 0.15–12mm for Screw Manufacturing

Product Introduction

TOPONE 201 stainless steel wire is available for manufacturers producing screws and other wire-formed hardware components. The wire can be specified according to the required diameter, mechanical properties, surface condition and manufacturing process.

With a diameter range of 0.15–12mm, the product supports different wire-processing requirements, subject to grade and specification availability. Bright and soap-coated surface options can be considered according to the customer's production process.

For screw manufacturing, wire selection should account for the screw design, forming method, required mechanical properties and working environment. If the production process involves cold heading, the wire's ductility, tensile strength, diameter tolerance and surface lubrication should be checked against the forming requirements.

Product Specifications

Note: Confirm the exact material standard, delivery condition, mechanical properties and surface requirements for the selected specification.

Why Consider 201 Stainless Steel Wire for Screws?

Material Selection for Hardware Manufacturing

201 stainless steel is an austenitic stainless steel grade that may be considered for selected hardware applications where its material properties and corrosion resistance meet the product requirements.

The suitability of 201 depends on the operating environment, component design, forming process and applicable material specification. It should not be treated as a direct substitute for 304 or 316 in every application.

Diameter Options for Different Screw Designs

The 0.15–12mm diameter range covers a broad selection of wire sizes. The correct starting diameter depends on the screw dimensions, forming allowance and manufacturing process.

For production requiring dimensional control, specify the nominal diameter together with the permitted tolerance.

Surface Options for Processing Requirements

Bright and soap-coated surfaces may be available according to the selected specification.

Bright wire can be considered when a clean metallic surface is required. Soap-coated wire may be suitable for forming processes that require additional surface lubrication. The appropriate option depends on the tooling, forming sequence and subsequent processing.

Specification-Based Supply

Wire diameter, mechanical condition, surface finish and packaging can be specified according to the customer's production needs. For cold-heading applications, confirm the material's formability and mechanical properties before selecting the final specification.

Applications

Screw Manufacturing

201 stainless steel wire may be considered for screw production when the material grade, wire condition and forming characteristics meet the requirements of the finished component.

Small Hardware Components

Depending on the required properties, selected 201 wire specifications may also be used for clips, pins and other wire-formed hardware parts.

General Wire Processing

The wire may be considered for further drawing, forming or other processing where the specified material properties are suitable for the intended application.

How to Select 201 Stainless Steel Wire for Screw Production

1. Confirm the Screw Design

Provide the screw type, dimensions, head geometry and forming process. These details help determine the required wire diameter and mechanical condition.

2. Specify the Diameter and Tolerance

Confirm the nominal diameter and acceptable dimensional variation according to the component drawing or applicable standard.

3. Check Mechanical Properties

For cold heading, tensile strength, elongation and delivery condition affect how the wire responds to deformation. Specify the required values based on the forming process rather than relying on the grade name alone.

4. Select the Surface Condition

Choose bright or soap-coated wire according to the lubrication method, tooling and downstream processing requirements.

5. Evaluate the Working Environment

201 stainless steel should be selected with its corrosion resistance in mind. For components exposed to moisture, chlorides or other corrosive conditions, evaluate the actual service environment before confirming the grade.

6. Confirm the Applicable Standard

Specify the exact standard and material requirements. ASTM, JIS, EN, DIN and GB are different standards systems; the applicable standard should be confirmed for the selected grade and delivery condition.

Frequently Asked Questions

What is 201 stainless steel wire used for?

It can be considered for selected screw-manufacturing and hardware applications when its mechanical properties, corrosion resistance and forming characteristics meet the component requirements.

What diameter range is available?

The stated diameter range is 0.15–12mm, subject to the selected product specification.

Is 201 stainless steel wire suitable for cold heading?

Suitability depends on the wire's delivery condition, mechanical properties, screw design and forming process. Confirm the required tensile strength, elongation, tolerance and surface condition before production.

Can soap-coated wire be supplied?

Soap-coated options may be available depending on the selected specification. Confirm the required coating and lubrication requirements when requesting a quotation.

What information is needed for a quotation?

Please provide the material grade, diameter, tolerance, mechanical properties, surface finish, screw type, applicable standard, quantity and packaging requirements.

Request a Specification

Contact TOPONE Wire with your 201 stainless steel wire requirements. Share your screw design, target diameter and forming process to help establish a specification suited to your manufacturing needs.