Intelligent Remote Control Battery-Powered Trackless Transfer Cart with 1-300ton

This battery-powered transport trailer cart offers a comprehensive range of die handling products specifically designed for the unique needs of stamping, molding, and transporting heavy dies or molds from storage to press lines. These die transfer trailer carts are widely used in processing lines for punching, pouring, cold heading, extrusion, powder metallurgy parts pressing, pressure casting, and compression or injection molding of engineering plastics, rubber, ceramics, and other products.

Our die transport products operate on rails or travel on cement floors and include die transfer carts, die transport trolleys, die rail carts, trackless carriers, battery-operated carriages, electric flat vehicles, industrial trailers, motorized railway bogies, and steering platform tables.

Our heavy die transfer trailers are operating in many shipping lines, stevedores, concrete manufacturers, foundries, steel mills, and other industrial facilities. We have supplied Hybrid Transfer Carts worldwide for moving molds inside and outside plants using electric traction and driving long distances.

Heavy Load Die Transfer Trailer Carts are mainly used to solve maneuverability problems in tight spaces. Due to all possible steering programs on either one or different axles, you can achieve tight turning radius. The propulsion can be either electric for in-plant load carts or battery-powered for long distances.

• CNC Cutting: Transport steel plates from raw material warehouse to CNC cutting workshop for cutting. After cutting, workers perform simple processing such as chip moving and setting out.
• Preliminary Assembling: Put the cut steel plate together according to the design drawing.
• Welding: Weld the steel plate with automatic welding machine after preliminary assembling.
• Post Weld Treatment: Test the welding section after welding, polish and burr. Perform post weld treatment to eliminate welding stress.
• Spray Primer: Transport the structure part after processing to painting booth for spraying primer. The main component of the primer is zinc rich epoxy antirust paint. The primer is applied in two layers.
• Assembling: Assemble the structure parts after spraying primer with wheels, motors and gear box, etc.
• Paint Finish: Transport the assembled cart to painting booth, inspect the integrity of primer. After that, paint the finish.
• Debugging: Debug the cart after painting with electric control system. After debugging, the cart will be tested without load. After the no load test, the cart will be tested with load. After inspection, the cart will be transported to storage area.

• For length less than 6m and width less than 2.2m: Transported by 20ft container.
• If length is longer than 5.9m and less than 12m: Transported by 40ft container.
• If quantity is 2 sets or 3 sets: Can be transported by full container.
• If quantity is 1 set: Can be transported by LCL Container.
• If length is less than 12m and width beyond 2.2m: Needs to be transported by flat rack (20 or 40 ft).
• If equipment is beyond above dimensions: Quantity needs to consider bulk cargo.

Henan BETTER Handling Equipment Co., Ltd. specializes in the Design and Manufacture of Flat Transfer Trolleys to solve every material handling requirement. Our product line includes Industrial Trailers, Transfer Cars, Electric Railway Transfer Trolleys, Scissor Lift Tables, Turntables and many other specialty items.