ORI(10F) Insulation resistance tester

function

Insulation resistance, polarization index, absorption ratio, AC/DC voltage testing; automatic discharge function; ambient temperature testing; clock function

source

DC 14.8V 5200mAh rechargeable lithium-ion battery; full charge voltage: approximately 16.8V

testing tension

Voltage range: 250V,500V,1000V,2500V,5000V,10kV

short-circuit current

≥5 mA

Wiring Method

L Wiring Terminal: The "L" terminal is designated as the high-voltage output terminal, also known as the line terminal, and is connected to one end of the device under test.

G terminal: The "G" terminal is known as the shielding terminal; it is used in the three-electrode method to measure the insulation resistance of insulating materials or cables and is connected to the electrode protection ring terminal.

E Connection Terminal: The "E" terminal is designated as the ground terminal and is connected to the ground or neutral terminal of the device under test. Examples include the motor housing metal, the transformer core, or the cable shielding layer.

Time Range

Maximum duration: 99 minutes 99 seconds (depends on measurement method; can be customized)

Maximum resolution

Insulation resistance: 0.01 MΩ

Test current: 0.01 nA

Test voltage: 0.1 V

Capacitor: 0.001 μF

stepped voltage

100 V – 1.00 kV, with step increments of 10 V;

2.50 kV–10.00 kV; alternating step sizes of 20 V and 30 V

be in a poor light

The brightness setting allows you to choose from three levels: High, Medium, or Low.

Voltage setting

Button-based gear selection

LCD

5.6-inch color LCD screen

Measurement Indicator

The LED indicator flashes and a "beep" alarm sound is emitted during measurement.

Charging Indicator

During charging, the indicator light on the charger will be red; once the device is fully charged, it will turn green.

Over-range warning

--OL--

data storage

After testing is completed, data is automatically stored; the system can store up to 1,000 data entries. The stored data includes information such as the current test data, ambient temperature, date and time, and other relevant details.

Data Reading

Select the Record Query function from the main interface; use the up, down, left, or right arrow keys to browse the data.

auto shut off

When powered by a battery, the device will automatically shut down after approximately 15 minutes of inactivity upon startup.

Standard Test Line

One red, one green, and one black test lead each, each equipped with a clip.

cell voltage

displays the remaining battery level in real time; please charge the device promptly when the battery level is low;

During low battery conditions, the instrument cannot output voltage for testing.

date

The top bar of the instrument's LCD screen displays the current date as set.

ambient temperature

The top bar of the instrument's LCD screen displays the current ambient temperature.

Instrument dimensions

Length × Width × Height: approximately 320 mm × 240 mm × 145 mm

Instrument Quality

Approx. 2.2 kg (including battery)

data transmission

Data can be exported using a USB data cable.

communication interface

USB port: allows you to transfer stored data to a computer for saving or printing.

Communication Line

1 USB communication cable (length: 1.5 m)

Workplace temperature and humidity

-10°C to 40°C; no condensation occurs at relative humidity below 80%

Storage temperature and humidity

-20°C to 60°C; non-condensable at relative humidity below 70%

withstand voltage

The test lead and the housing shall be subjected to an AC 5 kV, 50 Hz voltage for 1 minute.

insulation resistance

Test line-to-chassis resistance> 500 MΩ

Electromagnetic characteristics

IEC61326(EMC)

Complies with safety regulations

CAT IV 600V