Wuxi Hanyu power equipment co.,ltd
| Payment Terms | L/C, T/T |
| Supply Ability | 10000pieces/month. |
| Delivery Time | 15-35days |
| Packaging Details | CASE |
| Type | Battery Multi-Functional Crimping Tool |
| Crimping force | 60KN |
| Stroke | 42mm |
| Crimping range | 16-300mm2 |
| Cutting range | 40mm Cu/Al cable and armoured cable |
| Punching range | 22.5-61.5 |
| Brand Name | HANYU |
| Model Number | NEC-60UNV |
| Certification | ISO9001 |
| Place of Origin | China |
View Detail Information
Explore similar products
Lineman Tools NEC-40A Battery Powered Electric Power Cable Cutting Tool
Lineman Tools Cable Cutter NEC-50A Battery Powered Cable Cutting Tool
Lineman Tools Cutting Force 120kN NEC-55A Battery Powered Cable Cutter
Lineman Tools NEC-85A Battery Cable Cutter For Φ85mm Cu/Al Cable And Armored
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 10000pieces/month. |
| Delivery Time | 15-35days | Packaging Details | CASE |
| Type | Battery Multi-Functional Crimping Tool | Crimping force | 60KN |
| Stroke | 42mm | Crimping range | 16-300mm2 |
| Cutting range | 40mm Cu/Al cable and armoured cable | Punching range | 22.5-61.5 |
| Brand Name | HANYU | Model Number | NEC-60UNV |
| Certification | ISO9001 | Place of Origin | China |
| High Light | NEC-60UNV Lineman Too ，Multi Functional Battery Crimping Tool ，Battery Crimping Tool For Cable | ||
Lineman Tools NEC-60UNV Multi-functional Battery Crimping Tool for Cable
| Model | NEC-60UNV |
| Crimping force | 60KN |
| Stroke | 42mm |
| Crimping range | 16-300mm2 |
| Cutting range | 40mm Cu/Al cable and armoured cable |
| Punching range | 22.5-61.5 |
| Crimp/charge | 160times |
| Working cycle | 3-16s |
| Voltage | 18V |
| Capacity | 3.0Ah |
| Charging time | 45minutes |
| Package | Plastic case |
| Crimping die | 16.25.35.50.70.95.120.150.185.240.300mm2 |
| Punching & Die | 22.5,28.3,34.6,43.2,49.6,61.5mm |
| Blade | 1set |
| Adapter for crimping | 1pc |
| Adapter for punching | 1pc |
| 3/4" Draw stud/7/16"Draw stud | 1pc |
| Spacer | 1pc |
| Battery | 2pcs |
| Charger | 1pc(AC110-240V,50-60Hz) |
| Sealing ring of cylinder | 1set |
| Sealing ring of safety valve | 1set |
| Battery Crimping Tool | Micro computer control system-automatically detects the pressure when in crimping with double safety protect. The tool is equipped with a double piston pump which characterized with a fast approach towards the connecting material and transfer to high pressure automatically by slow crimping. If a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes. One key control-press the trigger to start working, half loosing the trigger means stop forcing pressure, loosing fully means piston return to the original position. A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal. |
| General features | The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached. A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released. The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion. The crimping head can be smoothly turned by 360° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas. Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of non operation the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries. A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal. |
| ① Head rotates 360° ② OLED Display (Crimp Times, Pressure, Voltage) ③ LED Light ④ Emergency Pressure Release Button ⑤ All tools can be controlled by one trigger ⑥ Ergonomic design for one hand operation. Micro computer control system-automatically detect the pressure ⑦ Li-ion lower power weight ratio with 50% more capacity and shorter charging cycles | |
Company Details
Business Type:
Manufacturer
Total Annual:
300-500
Employee Number:
150~200
Ecer Certification：
Verified Supplier
Since its establishment, Wuxi Hanyu Power Equipment Co., Ltd. has been manufacturing and producing with a complete and scientific quality management system. We have complete production equipment and precise testing instruments. Hanyu is committed to using strict management, excellent quality and goo... Since its establishment, Wuxi Hanyu Power Equipment Co., Ltd. has been manufacturing and producing with a complete and scientific quality management system. We have complete production equipment and precise testing instruments. Hanyu is committed to using strict management, excellent quality and goo...
Get in touch with us
Leave a Message, we will call you back quickly!