Zhuzhou TGC Cemented Carbide Co.,Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 5000kgs per month |
| Delivery Time | Standard products in one week |
| Packaging Details | plastic box/box + Cartons |
| Material | 12% Cobalt |
| ISO Grade | K30-K50 |
| Diameter | 10mm |
| Leght | 80mm |
| Tolerance | h6/h5 |
| Surface Roughness | Ra 0.2 |
| Circularity | 0.02 |
| straightness | 0.02 |
| Density | 14.12 |
| Hardness HV30 | 92.5 |
| T.R.S | 4200 |
| Grain size | 0.4 |
| Brand Name | OUQI |
| Model Number | Endmills blanks |
| Certification | ISO9001:2008 ISO14001:2004 |
| Place of Origin | China |
View Detail Information
Explore similar products
K40 Cemented Carbide Milling Blanks Non Ferrous Metals End Mill Bits HRA 92.2
YL50 Cemented Solid Carbide Round Blanks OD 16mm For Punching Dies
PCB Drills Tungsten Cemented Carbide Rod Blanks OD 3.175mm With One End Chamfer
Small Cemented Carbide Milling Blanks PCB Drill Bits 8% Cobalt
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 5000kgs per month |
| Delivery Time | Standard products in one week | Packaging Details | plastic box/box + Cartons |
| Material | 12% Cobalt | ISO Grade | K30-K50 |
| Diameter | 10mm | Leght | 80mm |
| Tolerance | h6/h5 | Surface Roughness | Ra 0.2 |
| Circularity | 0.02 | straightness | 0.02 |
| Density | 14.12 | Hardness HV30 | 92.5 |
| T.R.S | 4200 | Grain size | 0.4 |
| Brand Name | OUQI | Model Number | Endmills blanks |
| Certification | ISO9001:2008 ISO14001:2004 | Place of Origin | China |
| High Light | HRA92.5 Cemented Carbide Milling Blanks ，12% Cobalt Cemented Carbide Milling Blanks | ||
Cemented Carbide Milling BlanksHRA92.5 cemented carbide milling blanks for reamer making end mills
| ISO | Grain size | Cobalt | Density | Hardness | T.R.S | k1C |
| Code | μm | % | g/cm3 | HRA | N/mm2 | Mpa.m1/2 |
| K40-K50 | 0.4 | 12 | 14.12 | 92.5 | 4200 | 10.2 |
Application: Ultra-fine grain size, with good wear-resistant and toughness, especially suitable for finishing and processing alloy steel, aluminum alloy, titanium alloy etc. Suitable for making end mills and reamer.
| Diameter mm | Length mm | Diameter mm | Length mm | |||||
| D | Tolerance | L | Tolerance | D | Tolerance | L | Tolerance | |
| 1.60 | +0/-0.006 | 20 | 0/+0.5 | 10.00 | +0/-0.009 | 50 | 0/+0.5 | |
| 2.35 | 30 | 0/+0.5 | 10.00 | 70 | 0/+0.5 | |||
| 2.35 | 45 | 0/+0.5 | 10.00 | 72 | 0/+0.5 | |||
| 3.00 | 60 | 0/+0.5 | 10.00 | 75 | 0/+0.5 | |||
| 4.00 | +0/-0.008 | 40 | 0/+0.5 | 10.00 | 80 | 0/+0.5 | ||
| 4.00 | 46 | 0/+0.5 | 10.00 | 90 | 0/+0.5 | |||
| 4.00 | 50 | 0/+0.5 | 10.00 | 100 | 0/+0.5 | |||
| 4.00 | 60 | 0/+0.5 | 12.00 | +0/-0.011 | 70 | 0/+0.5 | ||
| 4.00 | 75 | 0/+0.5 | 12.00 | 79 | 0/+0.5 | |||
| 4.00 | 100 | 0/+0.5 | 12.00 | 83 | 0/+0.5 | |||
| 5.00 | 50 | 0/+0.5 | 12.00 | 100 | 0/+0.5 | |||
| 5.00 | 60 | 0/+0.5 | 12.00 | 120 | 0/+0.5 | |||
| 5.00 | 100 | 0/+0.5 | 13.00 | 100 | 0/+0.5 | |||
| 6.00 | 40 | 0/+0.5 | 14.00 | 75 | 0/+0.5 | |||
| 6.00 | 50 | 0/+0.5 | 14.00 | 80 | 0/+0.5 | |||
| 6.00 | 58 | 0/+0.5 | 14.00 | 83 | 0/+0.5 | |||
| 6.00 | 60 | 0/+0.5 | 14.00 | 100 | 0/+0.5 | |||
| 6.00 | 67 | 0/+0.5 | 16.00 | 80 | 0/+0.5 | |||
| 6.00 | 75 | 0/+0.5 | 16.00 | 90 | 0/+0.5 | |||
| 6 | 100 | 0/+0.5 | 20.00 | +0/-0.013 | 100 | 0/+0.5 | ||
| 8 | +0/-0.009 | 50 | 0/+0.5 | |||||
| 8 | 60 | 0/+0.5 | ||||||
| 8 | 63 | 0/+0.5 | ||||||
| 8 | 75 | 0/+0.5 | ||||||
| 8 | 90 | 0/+0.5 | ||||||
| 8 | 100 | 0/+0.5 | ||||||
| General tolerance for the h6 finished ground solid carbide rods | ||||||||||
| Diameter | Tolerance μm | Length | Tolerance | Straightness | Tolerance | Circularity | Tolerances | |||
| ＜3.0 | -6/0 | ＜100.0 | +0.5/+1.0 | ＜4.0 | 0.07 | <3,0 | 2,0 micron | |||
| 3.0-6.0 | -8/0 | 100.0-165.0 | +1.0/+2.5 | 4.5-5.0 | 0.06 | 3,0- 6,0 | 2,5 micron | |||
| 6.0-1.0 | -9/0 | 165.0-335.0 | +1.0/+6.0 | 5.5-12 | 0.05 | 6,1-10,0 | 3,0 micron | |||
| 10.0-18.0 | -11/0 | ＞12.5 | 0.04 | 10,1-18,0 | 3,5 micron | |||||
| 18.0-30.0 | -13/0 | 18,1- 30,0 | 4,0 micron | |||||||
| 30.0-50.0 | -16/0 | 30,1- 50,0 | 5,0 micron | |||||||
| General tolerance for the h5 finished ground solid carbide rods | ||||||||||
| Diameter | Tolerance μm | Length | Tolerance | Straightness | Tolerance | Circularity | Tolerances | |||
| ＜3.0 | -4/0 | ＜100.0 | +0.5/+1.0 | ＜4.0 | 0.07 | <3,0 | 2,0 micron | |||
| 3.0-6.0 | -5/0 | 100.0-165.0 | +1.0/+2.5 | 4.5-5.0 | 0.06 | 3,0- 6,0 | 2,5 micron | |||
| 6.0-1.0 | -6/0 | 165.0-335.0 | +1.0/+6.0 | 5.5-12 | 0.05 | 6,1-10,0 | 3,0 micron | |||
| 10.0-18.0 | -8/0 | ＞12.5 | 0.04 | 10,1-18,0 | 3,5 micron | |||||
| 18.0-30.0 | -9/0 | 18,1- 30,0 | 4,0 micron | |||||||
| 30.0-50.0 | -11/0 | 30,1- 50,0 | 5,0 micron |
|||||||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2013
Total Annual:
1000000-5000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Zhuzhou TGC Cemented Carbide Co., Ltd. is a Sino-foreign joint venture established in 2013 and located in Zhongnan High-Tech Intelligent Manufacturing Industrial Park, Zhuzhou, where there are well-developed traffic and logistics and modern standard workshops. The company is mainly engaged i... Zhuzhou TGC Cemented Carbide Co., Ltd. is a Sino-foreign joint venture established in 2013 and located in Zhongnan High-Tech Intelligent Manufacturing Industrial Park, Zhuzhou, where there are well-developed traffic and logistics and modern standard workshops. The company is mainly engaged i...
Get in touch with us
Leave a Message, we will call you back quickly!